| Author |
Topic: MSA pull rod spacers/collars |
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 21 Oct 2013 4:56 am |
|
Looking for the company that supplies the spacers/collars that fit on the pull rods of the MSA guitars. These are the aluminum 1-1.5" collars that are at the tuning end of the changer pull rods.
Thanks
Dwight
ijaash@yahoo.com
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 21 Oct 2013 5:20 am
|
|
The first two places to check for all things MSA:
Jim Palenscar, North County Steel Guitars (www.steelguitars.me I believe)
Tom Bradshaw in Concord Ca. (www.songwriter.com/Bradshaw I think).
Both are on the Forum
If yours just have rings worn in them, you can turn 'em around.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
|
|
|
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 21 Oct 2013 6:21 pm MSA Collars
|
|
Thank you gentlemen, I know about the guys mentioned, but just wanted to have my own stock. I once ordered some of these from a particular company, but its been so long since then, I have somehow lost the connection. I am motorcycle technician and I like doing my own work if possible. So i would want to have this kind of stuff in house. Thanks again
Dwight
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Eddie Freeman
From:
Natchez Mississippi
|
Posted 23 Oct 2013 12:29 pm MSA Spacers
|
|
| Dwight, I,ve made my own using brake line tubing from my local parts store, just make sure you size out the tubing so it matches your old spacer..... |
|
|
|
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 28 Oct 2013 6:36 am MSA collars
|
|
I thank everyone on their inputs.
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
