Pedal Rod Extenders

Ray Thomas · Post by **Ray Thomas** » 19 Aug 2013 1:51 pm

Need 3 one inch extenders, not sure if there are different thread sizes, mine is a Magnum, made by Carter.

Chuck Blake · Post by **Chuck Blake** » 19 Aug 2013 4:03 pm

Ray I have 3. 1" that have 8-32 threads. If they'll work for you I' ll hook you up for $10 .

My Rains guitars use 10-32 size threads.
Chuck

Chuck Blake · Post by **Chuck Blake** » 19 Aug 2013 4:07 pm

Ray I have 3. 1" that have 8-32 threads. If they'll work for you I' ll hook you up for $10 .

My Rains guitars use 10-32 size threads.
Chuck

Richard Sinkler · Post by **Richard Sinkler** » 19 Aug 2013 4:35 pm

I would think that Carter probably used the same pedal rods on the Magnum and the Carter models. Mine are 10-32.

You can get everything you need at any ACE Hardware or any good hardware store. You just need the 1" coupler and a set screw to go into one end of the coupler for the spring loaded ball joint socket to screw on to. I used 3/4" set screws so there would be enough of it in both the coupler and the ball joint fitting.

Ray Thomas · Post by **Ray Thomas** » 19 Aug 2013 4:41 pm

Thanks Chuck but I believe they are 10-32

Jerry Roller · Post by **Jerry Roller** » 19 Aug 2013 8:34 pm

Ray, did the kit I sent you not work for you? If you would like I will send you three 1" pedal rod extensions. Just let me know.
Jerry

Ray Thomas · Post by **Ray Thomas** » 20 Aug 2013 6:34 am

Jerry, all was ok except I goofed on the sizes, I really did not need the lift kit, one inch rod extenders will work, send me three 1 inch extenders, I will send the 2 inch ones back or I will pay you for the 1 inch ones after all it was my goof, let me know.

Jerry Roller · Post by **Jerry Roller** » 20 Aug 2013 9:25 am

Ray, I will mail them today. No charge.
Jerry

Ray Thomas · Post by **Ray Thomas** » 20 Aug 2013 2:26 pm

Thanks Jerry, the 2 inchers will be mailed back to you tomorrow

Robert Morgan · Post by **Robert Morgan** » 24 Aug 2013 10:20 am

Dan Beller-McKenna

From:
Durham, New Hampshire, USA Posted 31 Jul 2013 4:23 am

--------------------------------------------------------------------------------

Robert,

you can add extenders to your existing rods. Zoro Tools has them at a good price: part G3739915. These are for 10-32 thread which worked on my Sho Bud Professional; you may want to check the threads on your pedal rods. They come in sizes from 1/2" to 2". A pack of 10 will cost less than $10 with shipping. Should do the trick for you.

Dan

The Steel Guitar Forum