| Author |
Topic: F# to G# Knee Lever |
gary pierce
From:
Rossville TN
|
Posted 1 Jun 2013 3:26 am |
|
My RKL will not raise string 1 all the way, and wanted to know how to adjust the under carriage. Do I just change the rod to a higher slot on a Mullen G2. Thanks for any advice.
Gary |
|
|
|
Quentin Hickey
From:
Nova Scotia, Canada
|
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 1 Jun 2013 5:18 am Re: F# to G# Knee Lever
|
|
| gary pierce wrote: |
My RKL will not raise string 1 all the way, and wanted to know how to adjust the under carriage. Do I just change the rod to a higher slot on a Mullen G2. Thanks for any advice.
Gary |
Higher can be a relative term, since that can change depending on whether you mean when the guitar is on its legs or in the case.
You will want to use a slot either (or both):
Farther out from the axle on the bellcrank on the crossrod (so that the same movement of the axle pulls the rod farther)- that's higher when the guitar is in the case, or;
Closer to the string on the changer (so that the same a.count of rod pull moves the changer more), which is lower if the guitar is in the case, but higher when it's on the floor.
PS: the double post? You can remove it if nobody answers it by clicking the bomb icon next to the edit button
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
gary pierce
From:
Rossville TN
|
Posted 1 Jun 2013 6:59 am
|
|
| Thanks, I'll give it a try today. |
|
|
|
