The Steel Guitar Forum

I just bought an iTrack Solo for iPad and laptop. I connected my Peavey NV 112 to it (from the preamp output on the amp's back to the device's guitar input) and then record via Garageband. My question is for people who record via GB: To get the best recording closest to live performance, should I duplicate the real amp's settings in GB's amp settings, should I use the NV's settings only and turn the settings in GB off - or the opposite? What is the "professional" way for the best recording?
Thanks - and sorry if it is a stupid question.
John

John - It's not a stupid question.
The "professional" way to do it would be thru some kind of warm pre-amp. $$$
That being said, the NV112 is made to be played thru the speaker. The speaker & the amp, thats where the "live" sound is. With that amp, I would use a microphone.
You can certainly try to get a good sound using the EQs going straight out of the 112 pre-amp.
I would think your settings would change if you take the speaker out of the loop so you will have to experiment. Who knows, maybe you do the pre-amp out thing and you just love the sound. Gotta try stuff out and see what works for you.

I recently got a Blue Spark Digital Microphone.It plugs directly into an IPad's 30 pin connector or via adapter into the new lighting connector. Sounds great.

Thanks for suggesting using microphone instead. I must admit it sounds ten times better than the cold tone when recording directly to GB. Does it matter very much where the microphone is placed in front of the amp?

I think it's a matter of preference on mic placement. The middle of the speaker will be brighter than the edges. Experiment and have fun.