| Author |
Topic: Peavey Battery-less mods at the Dallas Show |
Ken Fox
From:
Nashville GA USA
|
Posted 21 Jan 2006 9:03 am |
|
I was not planning on doing any work at show this year. It looks like I caved in at last! I will be sharing a booth with Bobby Bowman on Friday and Saturday. I will try to do 4 hours per day, so I can spend some time with my new wife and friends! I will be able to do battery-less mods for:
Profex 1
Profex 2
Bassfex
Transtubefex
Tubefex
Transfex Pro amps
Session 2000 amp
Also Burr Brown audio upgrade for Profex 2 and Bassfex will be available.
If there is a lot of battery acid damage or unit is not working, I may not be able to work on it there. I will do what I can to get them up and going at the booth.
I will bring a cache card and a Peavey Midi-filer so I can save and re-load settings. I will have settings to load for those who have lost theirs.
|
|
|
|
Jim Saunders
From:
Houston, Texas, U.S.A.
|
Posted 21 Jan 2006 3:56 pm
|
|
| Ken, I'll stop by to meet you. Bobby B is a friend and he'll be good company for you in the booth. I'm loving my Session 2000 you sold me. |
|
|
|
Dean Dobbins
From:
Rome, Ilinois, U.S.A. * R.I.P.
|
Posted 21 Jan 2006 10:39 pm
|
|
Ken- I have a friend who would like to havethe battery chip, but can't make the Dallas show. Any chance of buying the chip, and having it installed localy? If so, the price of the chip, or, if he's not playing that week-end, the installed price at the show?
Thanks,
------------------
Dino |
|
|
|
Sam White R.I.P.
From:
Coventry, RI 02816
|
Posted 22 Jan 2006 6:35 am
|
|
Hey guys if you have one of these Pro Fex's have Ken Fox put in the Burr Brown for you. I had him do mine and it will never need to be replaced as there is no Battery any more to have to worry about eating the inside up and damaging it.
Sam White[This message was edited by Samuel E. White on 22 January 2006 at 06:35 AM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 22 Jan 2006 9:54 am
|
|
Dean, I sent you an email.
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 22 Jan 2006 10:01 am
|
|
My email server is down! So here is the reply:
Dean, it is 35.00 for the battery-less mod at the show. For 80.00 I do both the battery-less mod and the Burr Brown audio chips.
I can supply the chips only at:
20.00 for the battery-less memory
30.00 for the Burr Brown chips(4 total)
Shipping is 4.00, via Priority Mail.
If PayPal for payment, add 3 percent to cover the fees.
|
|
|
|
James Dasinger
From:
Houston Tx.
|
Posted 23 Jan 2006 4:19 am
|
|
| Ken I will bring my profex by the booth for the upgrades. Just like Jim said Bobby is a great person to share a booth. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 23 Jan 2006 12:41 pm
|
|
Sounds great. I will see all of you there. I will get a new order in place by the show so I have plenty of chips in stock.
The more of you that can let me know you are coming the better. That will help me gauge how much to get ready for the show.
I am not sure the hours I will be at the booth yet. I am thinking 12-4:00 PM would be good??? |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 23 Jan 2006 1:33 pm
|
|
| Hey Ken,,,save me a chip,,,,,,TransTubeFex |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 24 Jan 2006 10:13 am
|
|
Got you on my list, Sonny. Thanks all for letting me know you will be there and need service.
I will also do the output mods for Profex 2 and Bassfex while there. Increases output from 1 volt RMS to 2 volts RMS. Great for power amp input and straight power amp usage![This message was edited by Ken Fox on 24 January 2006 at 04:57 PM.] |
|
|
|
Bobby Boggs
From:
Upstate SC.
|
Posted 26 Jan 2006 5:05 am
|
|
| Folks if you haven't switched to the memory chip? You really need to. Ken is a great guy to deal with. If you can't make it to Dallas?? Send you're unit to his shop.Or, if you feel you can do it yourself.Order a chip from him.He'll treat you right.You can't go wrong with Ken....bb |
|
|
|
JAMES BANKS
From:
Mineola,TX USA
|
Posted 26 Jan 2006 6:31 am
|
|
Ken, what does the "brown burr chip" do? Is this a replacement for something or a modification of some kind?
Thanks
James |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 28 Jan 2006 3:46 pm
|
|
| There are four audio chips that I replace with these. It is a better quality chip with less background noise and a warmer tone. [This message was edited by Ken Fox on 28 January 2006 at 03:48 PM.] |
|
|
|
Steve England
From:
Austin, TX
|
Posted 29 Jan 2006 7:45 pm
|
|
| Ken Put me down for one of those. Now all I have to do is remember to bring my Profex |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 30 Jan 2006 6:54 am
|
|
Thanks, Steve. I have you on the list!
I have been asked about doing Brad Sarno kits for the show. I will not be doing that at the show. Here is a copy of a post I put in the electronics section about that:
"Brad and I talking now about what is need to assemble the kits and install them.
His help is greatly appreciated. He has done a great job on the website he created for these amps. Take a look here:
http://home.earthlink.net/%7Ebradsarno/session_400page.html
Looks like I will have a plan in a few days. I am not sure I want to offer the kits, as the amount of tech support on the phone time concerns me! Just selling the battery-less chips for user installation has taken a lot of time off my schedule due to phone support.
Right now I plan only to install the kits and also replace 7 power supply filters in in the preamp section, these are aged in these amps and need to be serviced with the power supply filters. It would take an experienced tech 1.5 to 2 hours to do this (inluding unpacking, install, clean pots, clean speaker jacks, bench test with sine wave generator/test load/O-Scope).
There will be around 24 or more components to replace. This will require removal of all knobs/nuts and then removing the circuits boards out of the amp."
[This message was edited by Ken Fox on 31 January 2006 at 07:14 PM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 31 Jan 2006 7:17 pm
|
|
Got a real scare today! I went to order Burr Brown audio chips for the show and ever distributor for Texas Instruments was out until mid April!
Ouch! I did a lot of research and found 5000 in China. I really did not want to import them.
I just located a parts house, not a distribitor with 5000 in Florida. I got 200 ordered and on the way. It takes 4 per unit for the upgrade. That will cover 50 Profex 2 or Bassfex units!
[This message was edited by Ken Fox on 02 February 2006 at 07:31 AM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 2 Feb 2006 10:38 am
|
|
The Burr Brown chips are shipped! For those of you who only got the battery mod at the last show or had it installed by me at my home, I can install the Burr Brown upgrade for 45.00 for you!
The response has been great so far. Looks like I will be a busy camper there at the show!
I will be working 12-4 only Friday and Saturday. Come on down. I should be able to do the units while you wait.
I can re-load your settings or put in new ones. I plan to bring 2 cache cards and a Peavey midi-filer to do the re-loads. That should cover it pretty well.
I will also have a very small 3 input mixer with headphone jack for testing. I will bring a DR-5 sequencer to act as an instrument to the Profex, etc!
|
|
|
|
JAMES BANKS
From:
Mineola,TX USA
|
Posted 2 Feb 2006 2:30 pm
|
|
Ken, put me down for the battery and the brown burr mod. I have always thought the settings on the profex were a little bright.
James |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 2 Feb 2006 3:45 pm
|
|
Thanks, James! See you in Dallas.
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 9 Feb 2006 5:51 am
|
|
Bump. Just got in 200 Burr Brown chips! I should have memory chips coming soon as well for the show!
|
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 9 Feb 2006 7:12 am
|
|
Ken I played the Vegas yesterday at the Fl. club jam at Lake Pansoffkee, it really sounds great since the upgrades were added, no noise at al at high volumes.
ernie |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 16 Feb 2006 2:00 pm
|
|
Looks like I will be busy at Dallas! Thanks for all the response.
Again, I will be at Bobby Bowman's table in the main ballroom, 12-4 on Friday and Saturday.
Work limited to mods only and general battery leakage clean-up.
[This message was edited by Ken Fox on 16 February 2006 at 02:03 PM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 21 Feb 2006 8:41 am
|
|
bump. Let me know if you are bring a unit for upgrade.
Thanks! |
|
|
|
Malcolm McMaster
From:
Beith Ayrshire Scotland
|
Posted 21 Feb 2006 9:48 am
|
|
Ken looks like I can make it over Dallas, would it be possible to have both sets of chips done on my profex2.Thanks Malcolm
------------------
 Mullen D10,Peavey Nashville 400,Peavey Profex, Peavey DPC 750, Nashville cabs
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 24 Feb 2006 3:06 pm
|
|
| Be glad to do it for you! |
|
|
|
