Props to Gary Rittenberry
Moderator: Shoshanah Marohn
- Jay Kardong
- Posts: 194
- Joined: 3 Jan 2001 1:01 am
- Location: Seattle, Washington
- Contact:
Props to Gary Rittenberry
Hey fellow players,
I just wanted to give a shout out to Gary Rittenberry for helping me over the last couple of weeks.
I accidentally broke off my vertical lever on my steel a few weeks back, and after talking with Gary, I sent the steel off to be fixed.
Last Friday, I got the steel back, and not only was it fixed, but he replaced a couple sticking tuners, upgraded the fret board to aluminum (old sticker one was becoming worn through), cleaned and polished it, upgraded some of the undercarriage, and added new pedal rod number markers! All of this done on his dime and back to me in a little over a week!
I have to say, this is amazing service from a wonderful hard working man. Not only does Gary build one of the best steels around, but he stands behind his product! A million thanks to Gary and to his professionalism.
Another Satisfied Customer
Jay
I just wanted to give a shout out to Gary Rittenberry for helping me over the last couple of weeks.
I accidentally broke off my vertical lever on my steel a few weeks back, and after talking with Gary, I sent the steel off to be fixed.
Last Friday, I got the steel back, and not only was it fixed, but he replaced a couple sticking tuners, upgraded the fret board to aluminum (old sticker one was becoming worn through), cleaned and polished it, upgraded some of the undercarriage, and added new pedal rod number markers! All of this done on his dime and back to me in a little over a week!
I have to say, this is amazing service from a wonderful hard working man. Not only does Gary build one of the best steels around, but he stands behind his product! A million thanks to Gary and to his professionalism.
Another Satisfied Customer
Jay
- Roger Crawford
- Posts: 5264
- Joined: 10 Sep 1999 12:01 am
- Location: Griffin, GA USA
- Mike Archer
- Posts: 6373
- Joined: 2 Apr 2004 1:01 am
- Location: church hill tn
Gary Rittenberry
THAT IS A FACT Gary goes out of his way to help players hes helped me so many times
hes a great builder and player and his service is top notch!!
Garys new guitars are awesome just wished I had the bucks for one but ive got 2 of his early ones
which are awesome too!!
hes a great builder and player and his service is top notch!!
Garys new guitars are awesome just wished I had the bucks for one but ive got 2 of his early ones
which are awesome too!!
Emmons SKH legrande/ Nash 400 amps
Tele and deluxe amp
Tele and deluxe amp
- Carl Kilmer
- Posts: 2691
- Joined: 7 Aug 2008 1:23 pm
- Location: East Central, Illinois
- Steve Hotra
- Posts: 341
- Joined: 11 Mar 2008 4:53 pm
- Location: Camas, Washington
- Contact:
-
- Posts: 655
- Joined: 21 Apr 1999 12:01 am
- Location: Friendswood, Texas 77546
Gary Rittenberry
In the last three years I have become a good friend to Gary and best of all, I have two new Rittenberry PSG's; that tells it all.
Even if you don't buy a Rittenberry, but call Gary to ask about one, he will become a good friend to you; that's just Gary.
And Gary, "I love you man, but you can't have my Bud Lite"!!
Even if you don't buy a Rittenberry, but call Gary to ask about one, he will become a good friend to you; that's just Gary.
And Gary, "I love you man, but you can't have my Bud Lite"!!
- Carl Kilmer
- Posts: 2691
- Joined: 7 Aug 2008 1:23 pm
- Location: East Central, Illinois
My only complaint is every time Gary plays one of my steels,
the sparks start flying and I can see some flames starting to
rise off the strings from his great playing. By time I get home
the flames are all gone. I can't figure out if it's because of the
long drive back home or fact that I'm just an old man.
Carl
the sparks start flying and I can see some flames starting to
rise off the strings from his great playing. By time I get home
the flames are all gone. I can't figure out if it's because of the
long drive back home or fact that I'm just an old man.
Carl
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
- Jerry Foster
- Posts: 912
- Joined: 18 Oct 2007 12:09 pm
- Location: Missouri, USA
-
- Posts: 944
- Joined: 21 Feb 2006 1:01 am
- Location: Forest Grove, Oregon, USA
Hear Yea Hear Yea!
Gary is a real champion to his devoted. I played last Sunday, and even though I've been suffering from this viral stuff making the circles, I still had to smile at the most beautiful tone produced by the Rittenberry that Gary created for me, with love, I might add.
A phone conversation will convince you that this man is a genius. He has ideas about the pedal steel that will keep him at the top of the field. What everyone above has said about Gary is all true. Thank you for taking care of your loyal, but then, we would remain loyal anyway because of the wonderful instruments you have made for each and every one of us.
A phone conversation will convince you that this man is a genius. He has ideas about the pedal steel that will keep him at the top of the field. What everyone above has said about Gary is all true. Thank you for taking care of your loyal, but then, we would remain loyal anyway because of the wonderful instruments you have made for each and every one of us.
-
- Posts: 4817
- Joined: 2 Nov 2001 1:01 am
- Location: Gum Spring, Va.
Recently acquired a previously owned Rittenberry guitar from Danny Cormier and all I can say is "WOW". Smooth playing, solidly built, great tone, this guitar has it all in spades and stays in tune well to boot. Cannot say enough good things concerning this fine instrument..Spoke with Gary at length this morning concerning some small parts that I needed and found him to be a most amiable, as well as extremely knowledgeable person. I honestly feel that I could not have made a better choice by selecting one of his guitars. Thank you Mr. Rittenberry.
-
- Posts: 1034
- Joined: 3 Apr 2006 12:01 am
- Location: Hardin, Kentucky, USA
-
- Posts: 944
- Joined: 21 Feb 2006 1:01 am
- Location: Forest Grove, Oregon, USA
Gary and the Rittenberry
As I see the asking prices on other guitars, I quickly realize that Gary produces the top guitar for a bargain. One must consider too that each guitar is a custom build. Gary designs and builds each guitar for the individual player. It doesn't get any better.
-
- Posts: 605
- Joined: 20 Jan 2009 5:15 pm
- Location: Way out West
I have to say amen to all the above comments. Gary just finished my second Ritt and it came out perfect. It started out as my effort to merge C6 & E9 into a single ten guitar .... Gary and I discussed the in's & out's & he carried it off perfectly. I played it at a jam last night with three very seasoned players & they were impressed at the sound of the Ritt & it's ability to flow between "C6 style" and straight country. Gary is a prince and deserves all the praise he receives.
Thanks again Reverend Rittenberry ... it is an amazing ax.
I will post some pics & a better descriptive in a few days.
Jim
Thanks again Reverend Rittenberry ... it is an amazing ax.
I will post some pics & a better descriptive in a few days.
Jim
-
- Posts: 500
- Joined: 11 Jan 1999 1:01 am
- Location: Florida
Rittenberry Guitars...
Jim,
I saw your new guitar a couple of weeks ago when I was at Gary's; Also getting in line for my 2d guitar.
It IS a work of art! I'm sure you love it.
Having spoken with Gary many times while he built my 1st guitar and now having had the pleasure of meeting him, I can say that he is everything that
everyone here has said he is,,,, and more !
He's a world class guy building a world class steel !
Thank you Gary,
Scott
I saw your new guitar a couple of weeks ago when I was at Gary's; Also getting in line for my 2d guitar.
It IS a work of art! I'm sure you love it.
Having spoken with Gary many times while he built my 1st guitar and now having had the pleasure of meeting him, I can say that he is everything that
everyone here has said he is,,,, and more !
He's a world class guy building a world class steel !
Thank you Gary,
Scott
-
- Posts: 3296
- Joined: 2 May 2008 3:15 pm
- Location: Columbia, Mo. U.S.A.
- Roger Crawford
- Posts: 5264
- Joined: 10 Sep 1999 12:01 am
- Location: Griffin, GA USA
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
Re: Rittenberry Guitars...
[quote="Scott Truax"]Jim,
I saw your new guitar a couple of weeks ago when I was at Gary's; Also getting in line for my 2d guitar.
It IS a work of art! I'm sure you love it.
Having spoken with Gary many times while he built my 1st guitar and now having had the pleasure of meeting him, I can say that he is everything that
everyone here has said he is,,,, and more !
He's a world class guy building a world class steel !
Thank you Gary,
I better be ahead of you!!!Ha! Mayish, Junish for my second one. I'll call ya.
Geo.
I saw your new guitar a couple of weeks ago when I was at Gary's; Also getting in line for my 2d guitar.
It IS a work of art! I'm sure you love it.
Having spoken with Gary many times while he built my 1st guitar and now having had the pleasure of meeting him, I can say that he is everything that
everyone here has said he is,,,, and more !
He's a world class guy building a world class steel !
Thank you Gary,
I better be ahead of you!!!Ha! Mayish, Junish for my second one. I'll call ya.
Geo.
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones
Old Gibson Mastertones