Thomas PSD, GFI PSD, and Magnatone For Sale
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
Thomas PSD, GFI PSD, and Magnatone For Sale
I'm a new non-musician member who joined up to sell these guitars and send Bob some mailbox money. The guitars have been posted on my personal website: http://www.paljack.com/SteelGuitars
Thank you!
Thank you!
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Tony Glassman
- Posts: 4470
- Joined: 18 Jan 2005 1:01 am
- Location: The Great Northwest
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Bob Knight
- Posts: 5096
- Joined: 4 Aug 1998 11:00 pm
- Location: Bowling Green KY
- Curt Langston
- Posts: 2907
- Joined: 3 Apr 2000 12:01 am
-
- Posts: 3296
- Joined: 2 May 2008 3:15 pm
- Location: Columbia, Mo. U.S.A.
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
Thomas PSD, GFI PSD, and Magnatone For Sale
I've enjoyed reading the forum the past few months. Yes, all of them are for sale. I'm still trying to determine a fair price on the Thomas and magnatone. Any advice for a
squash farmer?
[/img]
squash farmer?
[/img]
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Curt Langston
- Posts: 2907
- Joined: 3 Apr 2000 12:01 am
-
- Posts: 172
- Joined: 27 Mar 2011 7:54 pm
- Location: Perkasie PA, USA
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
For Sale: Steel Guitars
About the strange pedals. My brother mentioned the original owner only had a left leg. And thinks they go A B C from left to right and the lever is D or E.
I'm starting wonder now if I can even sell a squash.
I'm starting wonder now if I can even sell a squash.
-
- Posts: 172
- Joined: 27 Mar 2011 7:54 pm
- Location: Perkasie PA, USA
- Curt Langston
- Posts: 2907
- Joined: 3 Apr 2000 12:01 am
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
For Sale: Steel Guitars
Hey Eric,
Not yet...just sent you an email with an alt email address and my
home phone.
Thank you all very much,
Not yet...just sent you an email with an alt email address and my
home phone.
Thank you all very much,
-
- Posts: 172
- Joined: 27 Mar 2011 7:54 pm
- Location: Perkasie PA, USA
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
Thomas PSD, GFI PSD, and Magnatone For Sale
The Magnatone has been sold.
Thanks again guys.
Thanks again guys.
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
Thomas PSD, GFI PSD, and Magnatone For Sale
There have been a few questions asked about the GFI and Thomas guitars which I couldn't answer because I'm not a player. So I took them to Steel Guitars of North County and Jim was kind enough to take a look at them.
1)The GFI has a standard Emmons set-up.
2)The Thomas might only be worth $1900-$2000 to the right player. It only as two knee levers and the E9 side has a strange set-up which most players might want to have reconfigured. I can pay Jim to make the adjustments or the buyer could take it to their own guy. It would cost roughly $250. The other side has a standard Emmons set-up.
He also suggested a fair price might only be $1400-$1700 and hinted he prefers to be on the low side. So we'll consider all reasonable offers plus shipping and paypal fees.
I hope there aren't too many more technical questions as I'm running out of resources to get answers. Please don't trouble Jim with any questions - I only dropped his name to validate that someone knowledgeable took a look at them.
Thanks again everyone..
1)The GFI has a standard Emmons set-up.
2)The Thomas might only be worth $1900-$2000 to the right player. It only as two knee levers and the E9 side has a strange set-up which most players might want to have reconfigured. I can pay Jim to make the adjustments or the buyer could take it to their own guy. It would cost roughly $250. The other side has a standard Emmons set-up.
He also suggested a fair price might only be $1400-$1700 and hinted he prefers to be on the low side. So we'll consider all reasonable offers plus shipping and paypal fees.
I hope there aren't too many more technical questions as I'm running out of resources to get answers. Please don't trouble Jim with any questions - I only dropped his name to validate that someone knowledgeable took a look at them.
Thanks again everyone..
-
- Posts: 172
- Joined: 27 Mar 2011 7:54 pm
- Location: Perkasie PA, USA
Magnatone
I received the Magnatone, it is in good shape considering it's age and was extremely well packed by Jack. One of the switches was a little intermittent so right now the guitar is in pieces to see whether the switch can be cleaned or needs to be replaced. The guitar will be cleaned up and need to add a few missing screws to the tuners and it should be fine.
There was a little worry at first that something was wrong with the pots or pickups, because when turning the tone knob it was not a linear change in tone/volume. But now that I sketched out the circuit I realize it is a combo tone/blend pot and so that is expected. Considering rewiring with a stacked pot to separate the tone/blend.
All in all I am happy with the purchase and can't wait to get this up and running.
There was a little worry at first that something was wrong with the pots or pickups, because when turning the tone knob it was not a linear change in tone/volume. But now that I sketched out the circuit I realize it is a combo tone/blend pot and so that is expected. Considering rewiring with a stacked pot to separate the tone/blend.
All in all I am happy with the purchase and can't wait to get this up and running.
Jack informs me that the GFI has been sold. The Magnatone picture takes me back... I had an identical guitar before I got my first real pedal steel. It was the instrument I learned to play on.
For anyone who's on the fence about the Thomas: There weren't a lot of them made but they are really good guitars. Barry Thomas designed an excellent pedal steel. He wasn't a garage builder - he had a fully equipped shop with several employees and was producing these at a fair clip when personal circumstances forced him to close the business. People who were lucky enough to get one are very happy with their Thomas pedal steel.
For anyone who's on the fence about the Thomas: There weren't a lot of them made but they are really good guitars. Barry Thomas designed an excellent pedal steel. He wasn't a garage builder - he had a fully equipped shop with several employees and was producing these at a fair clip when personal circumstances forced him to close the business. People who were lucky enough to get one are very happy with their Thomas pedal steel.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
-
- Posts: 7
- Joined: 2 Oct 2011 5:22 pm
- Location: California, USA
For Sale: Steel Guitars
The Thomas just sold to a fella visiting the local area who saw an ad placed elsewhere before I knew about the SGF.
Thanks again to everyone who ponied up advice and opinions and to bOb for this very enjoyable forum. Please close this thread and check your PayPal account.
Thanks again to everyone who ponied up advice and opinions and to bOb for this very enjoyable forum. Please close this thread and check your PayPal account.