The Steel Guitar Forum

I need a way to make my split screws tighten up a little, but still be able to turn, of course.
I'm thinking I might try a bit of heat shrink...

use a very small amount of blue loctite.

thanks Chris, I'll try that.

On thing that can be easier to get loose later is a dab of clear nail polish. This also works well on the saddles of six string guitars.

I use Pipe thread silicone rapping tape, just use a narrow piece with one rap on the screw, the tape files up the slop while providing a lubicant. This way things will not lock up. Since pipe threads are very loose in relationship, pipe fitters love this stuff instead of locite or paint. This stuff is also handy to tighten up the pull rod treads in relation to the plastic tuning nuts. Good luck and happy steeling