Page 1 of 1
Cleaning Up A Stringmaster
Posted: 10 Apr 2010 4:33 am
by Earl Grubbs
Posted: 10 Apr 2010 5:31 am
by Ken Metcalf
It looks pretty bad,
For a small fee I could haul it away for you.
You know they charge extra these days to relic a guitar.
I would start by taking the strings off, and go with a damp rag Q-tips and work your way up to a mild watered down soap,if necessary , maybe some chrome cleaner.
Not too much and not to wet.
I like it the way it is.
New strings and you'll be set.
Posted: 10 Apr 2010 4:10 pm
by Eric Philippsen
Very nice. I would not call that being in bad condition.
Now, you're not so much the owner as you are the caretaker of it. So, here I go being blunt: Please don't refinish it.
Posted: 10 Apr 2010 5:18 pm
by Earl Grubbs
Ken, thanks for the info!
Eric, I think it's in pretty good condition also, all things considered!
Posted: 10 Apr 2010 5:40 pm
by David Beckner
Earl a visit to Guittar center or store that sells Virtuoso polish and a little elbow grease and this will look splendid.
Posted: 10 Apr 2010 6:19 pm
by Alan Brookes
I've seen Stringmasters in a lot worse condition than yours. Solvol Autosol is a chrome cleaner made for automobiles, but it's the best chrome cleaner I've used on guitars. Since your guitar is natural wood color you might try Old English furniture polish. It's good for covering scuff marks.
Posted: 11 Apr 2010 7:16 pm
by Jon A. Ross
Wow, lookit all the wear around the p.u.s! It looks like someone played the daylights outta this gtr; cool! I would much rather see that than a 50-60 yr old gtr in "unplayed" condition!
Stringmaster clean-up
Posted: 13 Apr 2010 3:03 pm
by Tom Wolverton
Careful what you use to clean up the wood finish. Some stuff will eat it. Treat the wood finish like a nice old D-28 Martin and I think you will be OK. Maybe a moist cloth and that's about it. For the metal clean up, see what other's have recommended. Now, there's one thing that I do with all Stringmasters. I carefully remove the nut and take the tuner pans out and clean them up and give them a good oiling. Sometimes the crown gear is too tight (see Paul Hosteler's web page about that)
http://www.lutherie.net/tuner.maintenance.html
Those old lollipop tuners are fragile, so be careful. It's a great, long scale guitar. and yes, please don't refinish it. : )
Posted: 13 Apr 2010 3:04 pm
by Ben Feher
If it doesn't come off with a slightly damp soft cotton rag its meant to be on the guitar. Its earned that grime from years of dedicated service.
Now if it was impeding its playability or tone, that's a different story, but it's not very likely.
I say take a damp rag to it and what doesn't come off leave it, but that's my opinions.
At the end of the day though its your guitar, do what you know is right.
Posted: 14 Apr 2010 6:47 am
by Earl Grubbs
Thanks to all for the advice and no, I'm definately not going to refinish it. I just wanted to clean off some of the grime and dust that has accumulated over the past 50+ years.
Tom, thanks for the tuner advice. I actually road bike so I have plenty of tri-flow at the house. I hadn't even thought of using that as a lubricant for the guitar.
Posted: 14 Apr 2010 2:26 pm
by Tom Wolverton
...and based on an interesting thread over in the non-pedal forum, you might check to see if your neck bolts need to be tighted up.
http://bb.steelguitarforum.com/viewtopic.php?t=181969
character
Posted: 15 Apr 2010 12:50 am
by Rick Winfield
Looks to me like it's got a lot of "character".
Many happy hours spent entertaining the "folks" and themselves.
If it were mine, I'd just use liquid gold on the wood, and polish the chrome a little
good times, with a nice axe
Rick
Posted: 15 Apr 2010 5:38 am
by Earl Grubbs
Yes Rick, the guitar came from the vicinity of the Arkansas/Texas border so I imagine it's seen a few state line bars and dancehalls in it's days.
One interesting side note: underneath the tuning pans written in pencil is the date 12/54 and the initials LF (Leo Fender perhaps).
Authentic
Posted: 15 Apr 2010 12:49 pm
by Rick Winfield
Sounds "authentic" to me.
From what little I know, beneath the tuning pans, was where they recorded it's "birthday", and who assembled it.
I'm excited for you !
Rick
Posted: 15 Apr 2010 1:33 pm
by John Billings
An excellent, pretty non-aggressive cleaner is Meguiar's Professional Swirl Remover 2.0. I've used it on old Shobuds, an it works wonders. It really does clean up grime, and gunk, and haze, and makes the finish shine. Wax it afterwards. And apply it by hand, not with a buffer as suggested.