Page 1 of 1
Lexico MPX1 help
Posted: 26 Oct 2009 1:58 pm
by Harold Power
Info needed on the Lexicon MPX1,
Can this unit be used with a Peavey DPC 750?
If so, what is the proper connection procedure?
If not,what is required to sucessfully connect and use this unit?
Thanks in advance, I would like replies and advice from some of you who are using the MPX1. H. P.
Posted: 26 Oct 2009 2:22 pm
by Jim Palenscar
The DPC750 is strictly a power amp so you would need a preamp as well.
Lexicon MPX1
Posted: 27 Oct 2009 4:02 am
by Harold Power
Thanks Jim
What would be a good choice for a preamp for the MPX1?
H. P.
Posted: 27 Oct 2009 6:54 am
by Jim Palenscar
There are a number of them- Peavey Profex(it already has effects as well as the Pod XT(the Pod XT is not rack mounted however but they do make a 2 space rack mounted unit), GD Walker's Stereo Steel, Brad Sarno's Revelation, Johh Lemay's new preamp(MK-1), etc. All depends on what direction you want to go and how much money you have to spend.
LexiconMPX1
Posted: 27 Oct 2009 7:57 am
by Harold Power
Thanks again for your reply Jim.
I have a profex II but I'm not sure if that could be used with an MPX1,they are both processors are they not?
Just thought an MPX1 would provide a superior sound than the ProfexII. H.P.
Posted: 27 Oct 2009 9:30 am
by robert kramer
You could use a Pro Fex II with an MPX-1 and just not program the effects in the Pro Fex - just use the Pro Fex pre-amp only. The Pro Fex signal is a good match for the pedal steel and you would be only using 2 rack spaces. Gtr > Vol Pedal > Pro Fex > MPX-1.
Lexicon MPX1
Posted: 27 Oct 2009 2:26 pm
by Harold Power
Thank you Robert for your help.
I have sent you an email. H. P.