| Author |
Topic: ShoBud Super Pro Vertical KL on a LDG |
Frederic Mabrut
From:
Olloix, France
|
|
|
|
Frederic Mabrut
From:
Olloix, France
|
Posted 22 Sep 2009 12:58 am |
|
| TTT |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 22 Sep 2009 5:13 am Knee Lever
|
|
Frederic, that looks like a very simple installation. And yes, it will fit without any fancy mods. the only thing that may be a small problem is the length of the cross shaft, there is a possibility you may have to shorten it a bit so measure how much space you have where the shaft will go. Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
Zeke Cory
From:
Hinsdale, New York USA
|
Posted 22 Sep 2009 6:23 am AND ... you will also need -
|
|
| You will also need the shorter knee lever mounting bracket, the one that connects the actual knee lever to the cross-shaft due to the lowered undercarriage body. The Super Pro's dont have the back body drop underneath that the LDG's do. My advice would be to consider the ones that Bobby Seymore sells that are the unbreakable aircraft aluminum. The original mounting levers were made from pot metal and will break when you need it out on a job. Best of Luck to you. Zeke |
|
|
|
John Billings
From:
Ohio, USA
|
Posted 22 Sep 2009 10:20 am
|
|
Not a Super Pro, but a lot of things are possible. Ricky Davis Did mine, with Coop parts.
 |
|
|
|
Paddy Long
From:
Christchurch, New Zealand
|
Posted 30 Sep 2009 2:00 pm
|
|
You should contact Jeff Surrat at ShowPro ...I have retrofitted knee levers to various ShoBuds that had the Super Pro type undercarriage and Jeff's kits look very similar and complimentary !
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases. |
|
|
|
