The Steel Guitar Forum Store 

Post new topic Tunable Splits on C6
Reply to topic
Author Topic:  Tunable Splits on C6
Scott Swartz


From:
St. Louis, MO
Post  Posted 14 May 2009 7:19 am    
Reply with quote

For the standard Emmons C6 setup as shown here

http://b0b.com/tunings/stars.html#C6be

Is it useful to have pedal 7 tunable split with the string 3 and 4 levers?

Any other useful splits that on C6 that involve changes that are not on the Emmons setup?

A search showed little to no discussion of splits on the C6 tuning.
_________________
Scott Swartz
Steeltronics - Steel Guitar Pickups
www.steeltronics.com
View user's profile Send private message Send e-mail Visit poster's website

Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 14 May 2009 3:17 pm    
Reply with quote

I don't see the point.

Pedal 7 gives a D on string 3. Splitting it with the lever that lowers 3 to B gives a C#. If you use the tuning as listed, you have the C# on RKR already.

Same is true on string 4. Pedal 7 gives a B note. Splitting it with the lever that lowers A to Ab would give you a Bb. Again, if you use the tuning as listed, you have the Bb on LKR.


Last edited by Richard Sinkler on 15 May 2009 12:45 am; edited 1 time in total
View user's profile Send private message Send e-mail

John Bechtel


From:
Nashville, Tennessee, R.I.P.
Post  Posted 14 May 2009 9:52 pm    
Reply with quote

It probably depends a lot on what string gauges you're using. If you raise #3 to C# on RKR, you still have an (A) on #4, but; if you raise #3 & #4 on p-7 and also lower #3 to C# on RKL, you still have a (B) on #4. If you then lower #3 by itself and it's slightly flat, you need the split/tuner. If it is in-tune, of course you don't need the split/tuner! The same goes for p-7 and LKL.
_________________
<marquee> Go~Daddy~Go, (No), Go, It's your Break Time</marquee> L8R, jb
My T-10 Remington Steelmaster
View user's profile Send private message Send e-mail

Edward Meisse

 

From:
Santa Rosa, California, USA
Post  Posted 14 May 2009 11:22 pm    
Reply with quote

Sorry, y'all. But do I understand correctly that a split is when two different pedals or levers have opposite affects on a string and one is able to tune those two opposite affects into a third usable affect?
_________________
Amor vincit omnia
View user's profile Send private message Send e-mail

Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 15 May 2009 12:53 am    
Reply with quote

Edward,

That is correct. But the splits mentioned above are available with separate knee levers, eliminating the need for splits, unless you have some chords available with them that are not available elsewhere. Since the poster used the tuning setup (Buddy's), the assumption has to be that the poster is using all the changes in that tuning. And, using pedal 7 raising both strings 3 & 4, the splits wouldn't give you the individual changes that the separate levers give. Example, the A to Bb lever giving the dom 7th of the C chord. Using the split senario above, you couldn't use the 3rd string in the C7th chord.

On the C6th, most changes are just half tone changes. Not much need for splits.
View user's profile Send private message Send e-mail

Edward Meisse

 

From:
Santa Rosa, California, USA
Post  Posted 15 May 2009 8:16 am    
Reply with quote

Thanks. Very Happy
_________________
Amor vincit omnia
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP