Page 1 of 1
Nylon hex nuts
Posted: 18 Mar 2009 12:21 pm
by Frank Allen
Howdy! New to the group and PSG's and was wondering where I can get those little nylon hex nuts that go on the end of the rods for tuning. Several of mine are cracked or marginal on my 1971 Marlen. That's not all that's cracked or marginal, but it's a start.
Thanks!
nylon nuts
Posted: 18 Mar 2009 4:38 pm
by Andy Hinton
George-L has both sizes. Don't have their address or phone no. handy but you can find them in links at top of the opening page of this Forum. Andy H. I just looked; it's at the top of this page too.
Posted: 18 Mar 2009 5:16 pm
by Hook Moore
re
Posted: 21 Mar 2009 9:12 am
by Mike Spaeth
e-mail sent to you
Posted: 23 Mar 2009 6:26 am
by David Biggers
The George L nuts must be either pre-threaded to go on or if you are real strong maybe you can get them started by pushing really hard. I could not.
I would recommend taping the holes 1st then install them.
Posted: 24 Mar 2009 8:53 am
by Mike Mantey
I have some available at the link below. They come threaded to a 5-40 thread and are 1/2 long.
http://www.mullenguitars.com/Parts.htm
Part # P0113