The Steel Guitar Forum Store 

Post new topic National New Yorker Tuner Replacement
Reply to topic
Author Topic:  National New Yorker Tuner Replacement
Tom Mack

 

From:
Illinois, USA
Post  Posted 7 Feb 2018 10:45 am    
Reply with quote

My National New Yorker had a strange rattle when certain notes were played. I eventually tracked it down to the tuners where the tuning "knob" was vibrating on the shaft of the tuner. Various attempts to stop the vibration failed, the final attempt was to try and crimp the tuner knob on to the shaft more tightly which resulted in the tuner knob shattering into many pieces. It looked like it was made out of the cheapest, most porous pot metal I've ever seen! So, I decided to get replacement tuners. I found a Kluson 3 on a plate replacement kit on Amazon. It included 2 x 3 on a plate sets of tuners, 6 ferrules and new screws. It turned out that the ferrules were slightly larger than the originals which required some drilling (gasp!) of the original holes. I proceeded very carefully, one size drill at a time, in 1/64th inch increments. The resulting hole was a little too big so I used teflon tape of the kind used on pipes to make a snug fit and take care of any vibration. Below are some pictures of the problem and the final solution. The original dust covers fit over the new Klusons even though the new Klusons had individual dust covers on each gear. No more vibration and nice, shiny tuners! I don't like that it's not 100% original any longer but the old problem detracted from the play-ability of the New Yorker.


View user's profile Send private message Send e-mail

Steve Wilson


From:
Morgan Hill, California, USA
Post  Posted 7 Feb 2018 1:10 pm    
Reply with quote

Nice job!
View user's profile Send private message Send e-mail

Tom Mack

 

From:
Illinois, USA
Post  Posted 7 Feb 2018 1:35 pm    
Reply with quote

Thanks Steve!
View user's profile Send private message Send e-mail

Eric Dahlhoff


From:
Point Arena, California
Post  Posted 7 Feb 2018 4:06 pm    
Reply with quote

I bet it tunes up better now also!
_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail

Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 7 Feb 2018 4:42 pm    
Reply with quote

Looks great !
I bought my New Yorker new, in 1950. After only a few months, a couple of the tuners started slipping. And as you recently did, I tossed the originals & replaced them ! They are still on there with no problems...

I rarely play it these days, after being hooked on Bakelites & frypans, but I have C#m tuning on it, to play around with ! Very Happy
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP