| Author |
Topic: K-130 JBL in a Nashville 400 |
Terry Sneed
From:
Arkansas,
|
Posted 14 Oct 2009 4:09 pm |
|
Could I get a few opinions on the K-130 4 ohm in a Nashville 400 please? Like tone, compared to a BW speaker. Plenty loud enough for an outside gig? No danger in Blowing the speaker with the volume up?
I'd appreciate it much.
I had a session 500 with a K-130 in it, and had the best tone of my 30 years of playing. I know their two different amps, but would like some imput on the Nashville 400 with the K-130. please.
Terry |
|
|
|
Terry Sneed
From:
Arkansas,
|
Posted 14 Oct 2009 8:37 pm amp
|
|
I'm thinkin of buying a Nashville 400 with the K-130 4 ohm J.B.L. in it, so I really would appreciate some advice guys. 
terry |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 15 Oct 2009 12:01 am
|
|
Terry, can't help you with that speaker in the NV400; but my vintage Webb had that, but with the speaker able to handle only 100 watts, and the Webb with 225 watts, I blew about 3 speakers before I finally had them reconed to 8 ohms. No problems since.
I don't know the NV400 power output, but I suspect it's pretty high. Thus, it's likely to blow 4 ohm speakers left and right.
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Terry Sneed
From:
Arkansas,
|
Posted 15 Oct 2009 4:26 pm 400
|
|
Thanks John, I appreciate the advice.
Terry |
|
|
|
Johnny Thomasson
From:
Texas, USA
|
Posted 16 Oct 2009 5:59 am
|
|
Nashville 400's are rated at 210 watts RMS.
_________________
Johnny Thomasson |
|
|
|
