| Author |
Topic: Walker SS |
Larry Behm
From:
Mt Angel, Or 97362
|
Posted 10 Nov 2008 5:15 am |
|
I have used Fender Twins, N400's and Webb amps for 35 years. My current rig is a Walker SS, with two 1501-4 ohm BW's.
300 watts a side and clean. I am known city wide for my neverending search for a cleaner sound, this just might be it.
Larry Behm |
|
|
|
Richard Tipple
From:
Ohio, USA
|
Posted 10 Nov 2008 3:28 pm
|
|
Larry,, what cabs are ya using for the BWs & what effects if any??
_________________
steelguitarguy.com |
|
|
|
Jim Eaton
From:
Santa Susana, Ca
|
Posted 10 Nov 2008 4:36 pm
|
|
Larry,
I am also using the Walker SS with 2 cab's with 1501's with neo-mag's and "clean" is the first thing everyone says when they hear my rig.
My cab's are K&K audio's and with the neo mags, each one is only 30lb's.
JE:-)> |
|
|
|
Larry Behm
From:
Mt Angel, Or 97362
|
Posted 10 Nov 2008 5:17 pm
|
|
RT I built my own cab, 20 x 21 x 11 1/4 deep, 3/4 plywood on the baffle board with 1501's.
I use a BB and a Boss VF-1 half rack ball buster fx unit. I have a 67 PP with Tonealigners and a Hilton.
Together this is about as clean and in your face as you can get and still be big enough in the low end.
Larry Behm |
|
|
|
