| Author |
Topic: Twangin' |
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 9 Aug 2008 5:16 am |
|
I have an 8 string lap steel and it has a fixed nut with cutouts for tha strings. I get a twangy type buzz when I play my high freq. strings. Any ananswers?
Dwight |
|
|
|
Alan Miller
From:
, England, UK.
|
Posted 9 Aug 2008 7:39 am
|
|
possibly the cutouts are wearing and the strings are at different levels.
A few years ago my dad was getting the same problem, he tried everything eventually I suggested "could it be that favorite bar you have using for the past 45 years"? |
|
|
|
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 9 Aug 2008 2:26 pm Twanging
|
|
Hi, the twang is there either with or without the bar applied. I dont want to thin it is the string which is ernie ball nickel wound that I use often.
Dwight |
|
|
|
Bill Duve
From:
Limestone .New York, USA
|
Posted 14 Aug 2008 12:38 am
|
|
Try fresh Jagwire's from the forum, no question there..  |
|
|
|
Austin Tripp
From:
Westminster SC
|
Posted 14 Aug 2008 5:19 pm
|
|
Hey Dwight, First check "all" the chords you are playing through, The most simplist problem could lie in the chord, second check you volume pedal (if you are playing through one), you may have a bad pot or if it is an electric pedal ,check your power chord. Third, check your amp, it may have a freak weak spot in it, fourth, check your pickup, it may have gone bad or have a wire loose, and finally if it is still doing it, the problem most be in the electric outlet your playing through. Hopes this helps
_________________
"Hotrod"
Steel guitarist for Cody Jinks
Member CMA |
|
|
|
