anyone know where i can buy extras, a few of mine are stripped out
thanks
nylon tuners for an msa
Moderator: Shoshanah Marohn
-
- Posts: 31
- Joined: 4 Jan 2007 8:33 am
- Location: New York, USA
- John Groover McDuffie
- Posts: 1459
- Joined: 16 Feb 2006 1:01 am
- Location: LA California, USA
The ones George L's sells will work for an MSA, although they are different than the stock ones. The ones that came on my MSA were shorter in length and the hole went all the way through, so that the end of the pull rods stick out. With the George L's type they are deeper and will cover the end of the knob. Get the ones for 1/8" rods.
If you want them to work more like the original ones you can take these and cut the end off so that they will thread past the end of the pull rod.
If you want them to work more like the original ones you can take these and cut the end off so that they will thread past the end of the pull rod.
-
- Posts: 31
- Joined: 4 Jan 2007 8:33 am
- Location: New York, USA
- John Groover McDuffie
- Posts: 1459
- Joined: 16 Feb 2006 1:01 am
- Location: LA California, USA
Click on "LINKS" at the top of this page
on the new page click on "MANUFACTURERS"
on the Manufacturers page scroll to the bottom under "related products and services" and click on "George L's Musical Products"
or go directly to www.georgels.com
on the new page click on "MANUFACTURERS"
on the Manufacturers page scroll to the bottom under "related products and services" and click on "George L's Musical Products"
or go directly to www.georgels.com