E9 laid out.

ed packard · Post by **ed packard** » 29 Jan 2008 1:11 pm

Here is a freebee of an E9 chord location workbook.

Besides the related theory, it contains 70 full necks in interval form for combinations of pedals and levers.

It provides a section with chord types for activated pedal and lever combinations. the chord types may be located for any key/root note desired.

Yours for the asking (for a limited time)...e-mail edpackard@citlink.net

When the format is refined, C6 and others may follow.

The file is in Excel, and is in the form of an electronic woorkbook = you may change, add to, delete, etc.. even add VBA skins and controls if you are into such things.

Donny Dennis · Post by **Donny Dennis** » 29 Jan 2008 5:00 pm

Ed,

I have sent you an email as I would very much like to have a copy of the E9 chord location workbook.

Thank you very much.

Regards,

Donny

Bryan Knox · Post by **Bryan Knox** » 29 Jan 2008 5:16 pm

Thanks Ed, got your email, looking forward to receiving it the file.

Bryan

Silvio Bello · Post by **Silvio Bello** » 29 Jan 2008 5:18 pm

Hi Ed,

Nice of you to offer this!
I'd like to get one of these,too. Email sent.
sb

Donny Dennis · Post by **Donny Dennis** » 29 Jan 2008 5:34 pm

Hi Ed,

I sent you an email but it was returned with the following error message: "- These recipients of your message have been processed by the mail server:
edpackard@citlink.net; Failed; 5.1.2 (bad destination system address)

Remote MTA mx.frontiernet.net: network error

- SMTP protocol diagnostic: 550 Too many invalid recipients"

Am sending you a PM.

Thank's.

Donny

Scott Howard · Post by **Scott Howard** » 29 Jan 2008 6:39 pm

email sent. thanks, Scott

Jim Eller · Post by **Jim Eller** » 30 Jan 2008 4:09 am

Ed,

Sent you an e-mail right after you posted.

Thanks for the offer.

Jim

Sam White · Post by **Sam White** » 30 Jan 2008 7:02 am

Hi Ed I sent you a E=Mail and I would Appreciate you book on the E-9 TH
Thank you
Sam White

Thomas Cross · Post by **Thomas Cross** » 30 Jan 2008 7:20 am

Ed, thank you for workbook, tfc

Doc Hope · Post by **Doc Hope** » 30 Jan 2008 7:58 am

HI Ed.
I sent you a email,would like to have the E9 chord work book.
Thanks
Doc Hope

ed packard · Post by **ed packard** » 30 Jan 2008 8:35 am

Just fired off the mailing to the first batch. It is 1.5MB so may take a while to receive.

If you don't receive, please let me know. Look in your "deleted box" first as some of this spam blocking stuff screws up attachments et al.

Enjoy;

Edp

Thomas Cross · Post by **Thomas Cross** » 30 Jan 2008 9:27 am

Hello Ed,

I have received the File.

Thank you, tfc

Marco Schouten · Post by **Marco Schouten** » 30 Jan 2008 11:35 am

Thanks Ed,
impressive piece of work !!!

Sam White · Post by **Sam White** » 30 Jan 2008 12:15 pm

Hi Ed I got what you sent me but I down load it and when the file is done I click on it and brings up a box for me to put in numbers like Norton Anti Virus.So I don't get any thing.
Sam White

Tim Kowalski · Post by **Tim Kowalski** » 30 Jan 2008 12:48 pm

Ed, I received the file and could only take a brief look at the spreadsheets. This was obviously a tremendous undertaking and looks extremely useful. I am expecting this to light a few bulbs for me. (There are so many that are un-lit)
Thank you very much for sharing your hard work with us. Great job!

Terry Pendlay · Post by **Terry Pendlay** » 30 Jan 2008 1:51 pm

PLEASE SEND A COPY , SOUNDS GOOD THANKS FOR YOUR HELP . TERRY

ed packard · Post by **ed packard** » 30 Jan 2008 2:50 pm

Terry...please send the request to the e-mail address in the opening post so I don't have to "harvest" e-mails.

Thanks

Clyde Lane · Post by **Clyde Lane** » 30 Jan 2008 3:05 pm

Thanks Ed, what a great piece of work.

W. J. Copeland · Post by **W. J. Copeland** » 30 Jan 2008 4:11 pm

I think it is great when a forum member is willing to take the time and share educational information with others just for the sake of making it easier for someone to learn and improve musically.

Ben Lawson · Post by **Ben Lawson** » 30 Jan 2008 5:45 pm

I got it Ed. Thanks for your hard work and generosity.

Ben

Calvin Walley · Post by **Calvin Walley** » 30 Jan 2008 5:59 pm

count me in for a copy please

ed packard · Post by **ed packard** » 30 Jan 2008 6:35 pm

Kevin W...{lease ask via the e-mail address in the opening post for this thread...saves me a lot of time.

A caviat...this is an open (unlocked) spreadsheet. You may modify ant row, column, cell, range, etc. therefore you should put a copy away so that you can return to go just incase.

Jeremy Threlfall · Post by **Jeremy Threlfall** » 30 Jan 2008 7:03 pm

Hi Ed

I'd like to see a copy of that, thanks!

email sent

Jeremy

PS Hows your 'beast' going? Did Sierra ever make the mini-beast you were talking about?

ed packard · Post by **ed packard** » 30 Jan 2008 7:08 pm

JT...you are on the list.
RE BEAST = doing fine...yes, the 10 string E9 Mini Beast was made by Sierra, as was my Bb13 unit.

James Collett · Post by **James Collett** » 30 Jan 2008 7:14 pm

Thanks Ed! Looking forward to getting the spreadsheet! Should be a big help

The Steel Guitar Forum

E9 laid out.

E9 laid out.

E9th Chord location chart

Sam White ( NESGA )

Ed, thank you.

first batch sent

File Received.

Sam White NESGA

e-mails

e-mail address

Beast