The Steel Guitar Forum Store 

Post new topic Framus jack question
Reply to topic
Author Topic:  Framus jack question
Ron Victoria

 

From:
New Jersey, USA
Post  Posted 3 Nov 2005 4:12 pm    
Reply with quote

http://cgi.ebay.com/Framus-Electra-Lap-Steel-lapsteel-Electric-Guitar_W0QQitemZ7363524582QQcategoryZ2384QQrdZ1QQcmdZViewItem

I've never seen this before. What would you use, a 1/4" plug to a splitter with 1/8" jacks?
Nice looking guitar. How do they sound?
View user's profile Send private message Send e-mail

Keith Cordell


From:
San Diego
Post  Posted 3 Nov 2005 4:34 pm    
Reply with quote

The problem with this lap steel is that the pickup is in the cover, hovering over the strings; sounds awful and thin, and you can barely pick the strings without contacting the pickup surface and rattling. If you want one let me know, there is one in a local music store that has been there for a year or so.
View user's profile Send private message Send e-mail

Ron Victoria

 

From:
New Jersey, USA
Post  Posted 3 Nov 2005 4:42 pm    
Reply with quote

No thanks, I was just curious how it plugged into an amp. PU over the strings, now that's a new one on me.
Ron
View user's profile Send private message Send e-mail

Craig Stenseth


From:
Naperville, Illinois, USA
Post  Posted 3 Nov 2005 6:07 pm    
Reply with quote

It almost looks like a banana plug, meaning no ground to shield the hot wire from hum.
View user's profile Send private message Send e-mail Yahoo Messenger

Victor Denance

 

From:
Rennes, France
Post  Posted 4 Nov 2005 3:41 pm    
Reply with quote

I have a Framus 8 stringer almost like this one.
These guitars have 2 holes for the "jack" input and 1 hole for the volume pot.
What most people do is replace the volume pot by a standard jack, and replace the original "jack" by both volume and tone control.

And I find that pickup definitely NOT crappy. It is probably the most simple design ever. Just a square bar magnet surrounded by a coil wrapped into fabric.
But it sounds strong (output is similar to a P90) and quite agressive. Actually the sound of that cheesy Framus reminds me my friend James "Crowbear" Schmidt's old Gibson EH 100 with Charlie Christian pickup.
(btw I removed the metal cover over the pickup, and it opened the sound significantly).

IMO these Framus have a surprising tone for cheapos.
View user's profile Send private message Send e-mail

Max Laine

 

From:
Pori, Finland
Post  Posted 5 Nov 2005 7:16 am    
Reply with quote

Victor, I had a guitar just like the one in the auction above, except the pearloid on the peghead was white. On that guitar the pickup is attached to the cover, so if you remove the cover you remove the pickup. The pickup is possibly glued to the cover. The neck is round, it has a string adapter but I doubt it could be played as a regular guitar. Mine had a serious bow... Maybe they had a different pickup on eight string models?
View user's profile Send private message Send e-mail

Max Laine

 

From:
Pori, Finland
Post  Posted 12 Nov 2005 8:21 pm    
Reply with quote

This Framus Shows the underside of the pickup/cover assembly
View user's profile Send private message Send e-mail

Keith Cordell


From:
San Diego
Post  Posted 12 Nov 2005 8:27 pm    
Reply with quote

Can't be the same instrument, Victor. If you remove the cover, you remove the pickup. Though that certainly would "open up the tone", It would be considerable quiter and certainly unlike any P90 in existence.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP