Tilt forward for better string contact
Moderator: Shoshanah Marohn
-
- Posts: 2732
- Joined: 8 Mar 2007 3:45 pm
- Location: Placerville, California
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
I am a 6’3 sorta newb with long legs and arms. I have a lift kit for the front legs on the steel. I do the tilt for extra leg room in the back but have to be careful with how much tilt as well as seat height, as regards the aforementioned upper arm-forearm-to-wrist alignment. Shoulder tension is a killer.Roy Carroll wrote:Thanks Gents for all the replies. I am 6'1" and have pretty long arms. My picks are curved so that the fingers are curled in.
Been playing a very long time. I just thought that maybe some of the newbies could try it to get comfortable.
Thanks again,
Also, one more alert to other new players - hang on to the bar! If you lose your grip that bugger will slide right off a tilted neck.
- John McClung
- Posts: 5106
- Joined: 4 Aug 1998 11:00 pm
- Location: Olympia WA, USA
- Contact:
Good point, Fred! I usually have a backup bar between necks onstage in case that slippage occurs. And it has...spare picks in the pack-a-seat, too. Boy Scout mode!Fred Treece wrote:I am a 6’3 sorta newb with long legs and arms. I have a lift kit for the front legs on the steel. I do the tilt for extra leg room in the back but have to be careful with how much tilt as well as seat height, as regards the aforementioned upper arm-forearm-to-wrist alignment. Shoulder tension is a killer.Roy Carroll wrote:Thanks Gents for all the replies. I am 6'1" and have pretty long arms. My picks are curved so that the fingers are curled in.
Been playing a very long time. I just thought that maybe some of the newbies could try it to get comfortable.
Thanks again,
Also, one more alert to other new players - hang on to the bar! If you lose your grip that bugger will slide right off a tilted neck.
E9 INSTRUCTION
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
- Jacek Jakubek
- Posts: 336
- Joined: 10 Mar 2007 7:53 am
- Location: Mississauga, Ontario, Canada
I also tilt my steel slightly forward for a comfortable and relaxed wrist position. I just eyeball it, as long as it's a little forward from being level, it's good.
I play Carters and I had to attach extensions to the levers (made the levers about 3" longer) because I found them too short even with the guitar level, let alone tilted forward.John McClung wrote:Some steels have shorter levers, Carters are a good example, and if you jack up the back end too much, you're missing the lever altogether. One of my knocks on Carters.