| Author |
Topic: Need help from someone with a Carter S10 |
Bruce Derr
From:
Lee, New Hampshire, USA
|
Posted 12 Aug 2014 9:39 am |
|
I would like to try some brass barrels with lock screws as well. I am considering ordering some 4-40 threaded brass standoffs, 3/16" OD x 1/4" long, and just drilling a hole through the side for the rod. Has anyone else tried that? It sure would be easier than fabricating from rod stock.
A standoff that might work is Keystone # 1547, available at digikey.com, cat# 1547K-ND. They are inexpensive. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 12 Aug 2014 10:43 am
|
|
Bruce... As long as you had a drill press (or milling machine) and a vise, it would be very difficult to drill the hole straight through the standoff. But that is a good idea.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Dale Kath
From:
Michigan, USA
|
Posted 12 Aug 2014 6:42 pm brass dog bones
|
|
i contacted al brisco in canada and put in an order for some Carter hardware. What a nice and helpful man. i plan on visiting his store near Toronto, which Al calls pedal steel heaven!
_________________
Carter SD10
Steel Guitar Black Box
Heritage h535
Epiphone viola bass |
|
|
|
Jarek Anderson
From:
Ontario, Canada
|
Posted 13 Aug 2014 4:52 am Re: brass dog bones
|
|
| Dale Kath wrote: |
| i contacted al brisco in canada and put in an order for some Carter hardware. What a nice and helpful man. i plan on visiting his store near Toronto, which Al calls pedal steel heaven! |
It's a great place to visit. You can pick up some good pies just east of his place as well. You can't miss the spot... |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 13 Aug 2014 11:59 am
|
|
| Bruce Derr wrote: |
I would like to try some brass barrels with lock screws as well. I am considering ordering some 4-40 threaded brass standoffs, 3/16" OD x 1/4" long, and just drilling a hole through the side for the rod. Has anyone else tried that? It sure would be easier than fabricating from rod stock.
A standoff that might work is Keystone # 1547, available at digikey.com, cat# 1547K-ND. They are inexpensive. |
wow, that might do the trick Bruce.. If you do it. PLEASE let me know how it went... They are dirt cheap, if this is what you mean... bob
http://www.ebay.com/itm/20-Pieces-Brass-Spacer-Standoff-3-8-Long-3-16-O-D-4-40-Threads-/281408397564?pt=LH_DefaultDomain_0&hash=item41853f60fc
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
