Page 2 of 2
Posted: 4 Apr 2013 8:06 am
by Mike Wheeler
My MCI S-12 Universal's jack (non-welded frame) is on the rear apron and is 1 and 3/4 inch from the rear deck top.
Posted: 4 Apr 2013 5:33 pm
by Joseph Meditz
Excel S-10 jack is 2.625" below the top. Btw, there is a tone control directly above it that is 1.375" below the top.
Need a measurment of your steels.
Posted: 4 Apr 2013 7:25 pm
by Bobby D. Jones
MSA S10 the Jack is on the back apron and is 1 1/4 t inches down from the top of the downset to the center of the hole. Hope this helps you. Happy Steeling.
Posted: 4 Apr 2013 9:30 pm
by John McClung
Mullen pre-RP D-12: jack is under rear edge (closest to player) of E9 deck, 2.5" distance.
Posted: 5 Apr 2013 3:38 am
by Jon Light
Hey--just saw that this got a bunch of new action. Thanks guys!
Turns out that the idea I was trying to design was dead on arrival. It involved mounting my 2pup rig via a permanently installed male plug. But I could not get past a couple of issues including the substantial differences in this measurement.
So now we have this database. Maybe it will be useful some day to someone doing a forum search.
Thanks!
.
.