Greg Leisz

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

User avatar
James Mayer
Posts: 1526
Joined: 5 Sep 2006 12:01 am
Location: back in Portland Oregon, USA (via Arkansas and London, UK)

Post by James Mayer »

I listened to samples from KD Lang's "Ingenue" that is referenced in this thread. I didn't hear any steel. My question is, what should I look into that has plenty of Leisz instead of a little bit here and there?
User avatar
Mark Eaton
Posts: 6047
Joined: 15 Apr 2005 12:01 am
Location: Sonoma County in The Great State Of Northern California

Post by Mark Eaton »

James Mayer wrote:I listened to samples from KD Lang's "Ingenue" that is referenced in this thread. I didn't hear any steel. My question is, what should I look into that has plenty of Leisz instead of a little bit here and there?
James, the first song in particular "Save Me" has some very creative lap steel work by Greg. I'm at work so I can't recall the sequencing off the top of my head, but you really need to listen to the whole song. As I recall there's an instrumental break in the middle where Greg takes off, but if you're only getting the first 30 seconds of the song then you're not into the meat and potatoes portion as far as steel goes.
Mark
User avatar
James Mayer
Posts: 1526
Joined: 5 Sep 2006 12:01 am
Location: back in Portland Oregon, USA (via Arkansas and London, UK)

Post by James Mayer »

Mark Eaton wrote:
James, the first song in particular "Save Me" has some very creative lap steel work by Greg. I'm at work so I can't recall the sequencing off the top of my head, but you really need to listen to the whole song. As I recall there's an instrumental break in the middle where Greg takes off, but if you're only getting the first 30 seconds of the song then you're not into the meat and potatoes portion as far as steel goes.
I figured. I just went to allmusic.com and went through the samples.
User avatar
Kevin Milner
Posts: 131
Joined: 25 Apr 2011 10:22 am
Location: Los Angeles, California, USA
Contact:

Post by Kevin Milner »

James Mayer wrote:I listened to samples from KD Lang's "Ingenue" that is referenced in this thread. I didn't hear any steel. My question is, what should I look into that has plenty of Leisz instead of a little bit here and there?
The one I recommended, Sara Watkins' album, is literally dripping with Leisz. And it's all incredible.
GFI S10-P Ultra -> Milkman 40w Pedal Steel Mini or 300w Half & Half (or Sarno SGBB/Nashville 112 or '94 Twin Amp or Homebuilt 5e3)
Effects: Cali76-CD Compressor -> EP booster -> Sarno Earth Drive -> Earthquaker Devices Zap Machine -> Earthquaker Devices Grand Orbiter Phaser -> Caitlinbread Dirty Little Secret Mk III -> Malekko Envelope Filter -> Hilton VP -> Pedal Projects Klone -> Tech 21 Blonde -> Strymon Timeline -> TC Electronics Spark Mini Boost -> Strymon Lex -> Strymon Flint
User avatar
Mike Neer
Posts: 10990
Joined: 9 Dec 2002 1:01 am
Location: NJ
Contact:

Post by Mike Neer »

This is one of my favorites, right here--Peter Case, "Spell of Wheels"

http://www.youtube.com/watch?v=vzAdqnmPNbk
User avatar
Chuck S. Lettes
Posts: 2242
Joined: 14 Aug 2000 12:01 am
Location: Denver, Colorado

Post by Chuck S. Lettes »

Hi James,
Check out the new Jeff Bridges CD, the follow-up to Crazy Heart. He definitely loves steel guitar.
Chuck
User avatar
Douglas Schuch
Posts: 1390
Joined: 10 Jun 2011 9:33 am
Location: Valencia, Philippines

Post by Douglas Schuch »

I posted this link in "Steel On The Web" about a week ago: the musics doesn't come in until 15 seconds in, so be patient...and ignore the stupid video of someone's cat, but listen to the great music. Greg on steel, for the whole album "Got No Strings". It is all music from Disney Movies...so not standard genre stuff. Mostly done in a light, accoustic style with lots of retro-elements: hints of Stephen Foster, Hawaiian, Western swing, and bluegrass. "To Be A Cat" is my favorite, but some good steel on the rest.... Mostly lap steel, I think, but one dobro and once acoustic slide, and one I would swear is a nylon string guitar played with a bar.

I can't find any other cuts from the album on Youtube, but worth having in your collection unless you are locked into a particular style.

Link to song:

http://www.youtube.com/watch?v=-BA2sJvVxHc

Doug
Bill Kellum
Posts: 83
Joined: 29 Jun 2010 10:27 am
Location: Water Valley, MS

Post by Bill Kellum »

Rick Schacter wrote:As was already mentioned, his work on the album "Girlfriend" by Matthew Sweet is great.

He also played some mandolin as well as pedal steel for John Fogerty's "Blue Ridge Rangers".

Here's another song from the group Tiger Army that has Greg Leisz playing the pedal steel:

http://www.youtube.com/watch?v=UxvTTRKvfEU

Rick
Im digging this Tiger Army. Thanks for turning me on to them.
Jonathan Slyker
Posts: 131
Joined: 14 Aug 2009 12:23 pm
Location: Montclair, New Jersey, USA

Post by Jonathan Slyker »

"Of course k.d. lang has great admiration for Greg, and below is a quote she made about his pedal steel playing years ago that I'm sure many here are familiar with : 

'Leisz single-handedly liberated pedal steel from the bondage of country.'

Oh, silly me, I thought it was Joseph Kekuku, in 1885
MCI D-10 (Curly Chalker's last guitar) Curly's C6th on front neck; Johnny Cox’s E13th on back with E9th pedals.
Widgren custom-built 12 string keyless lap.
User avatar
Mark Eaton
Posts: 6047
Joined: 15 Apr 2005 12:01 am
Location: Sonoma County in The Great State Of Northern California

Post by Mark Eaton »

Did Kekeku play a pedal steel? :eek:
Mark
User avatar
Brian McGaughey
Posts: 1185
Joined: 3 Nov 2006 1:01 am
Location: Orcas Island, WA USA

Post by Brian McGaughey »

Devon Teran wrote:I've been teetering on the edge of diving fully into pedal steel for a while but I'm not really a country guy.
Ya don't have to be country to play pedal steel.
User avatar
Ron Davis
Posts: 580
Joined: 8 Aug 2010 1:24 pm
Location: Lake Arrowhead, California... We're a mile high. ;)

Post by Ron Davis »

I've had the pleasure of meeting Greg & spending some time with him. He played my Emmons & showed me some stuff. He was at Jim Palenscar's getting a little tweak on his '66 Emmons. (Jim U rock, Bro!)
Greg did tell me about the Ray LaMontagne stuff, & he did play pedal steel on more than a couple songs, as well as guitar & slide... It was real cool, cuz he told me all about the God Willing sessions.
I do think Greg's right at the top of my fav list. Such a tasty player.
Haunting parts... He really orchestrates the songs he plays on, with his steel playing. Plays for the song, for sure. Not a "grandstander", so to speak. (Not that I don't love the grandstanders too.) ;)

Through The Morning, Through The Night on the Plant Krause record feeds my soul. ;)

OK, I'm done. lol
Emmons 12 p/p, Revelation, Black Widows, (& way too many assorted goodies...)
Drummer with a pedal steel fantasy. ;)

www.LA-Zep.com
www.Desperado1.com
www.CMWChicagoTribute.com
Bill Kellum
Posts: 83
Joined: 29 Jun 2010 10:27 am
Location: Water Valley, MS

Post by Bill Kellum »

Was the Greg on the Chipotle commercial with Willie singing "The Scientist"? It sure sounded like him. I like the song and message of that commercial.
User avatar
Ron Davis
Posts: 580
Joined: 8 Aug 2010 1:24 pm
Location: Lake Arrowhead, California... We're a mile high. ;)

Post by Ron Davis »

Hmmm...
Not familiar with that. Maybe it's not out here on the West Coast.
Emmons 12 p/p, Revelation, Black Widows, (& way too many assorted goodies...)
Drummer with a pedal steel fantasy. ;)

www.LA-Zep.com
www.Desperado1.com
www.CMWChicagoTribute.com
Bill Kellum
Posts: 83
Joined: 29 Jun 2010 10:27 am
Location: Water Valley, MS

Post by Bill Kellum »

Ron Davis wrote:Hmmm...
Not familiar with that. Maybe it's not out here on the West Coast.
here is the linkhttp://www.youtube.com/watch?v=aMfSGt6rHos

i didnt realize until now that it is a Coldplay song.
User avatar
Kevin Milner
Posts: 131
Joined: 25 Apr 2011 10:22 am
Location: Los Angeles, California, USA
Contact:

Post by Kevin Milner »

Bill Kellum wrote:
Ron Davis wrote:Hmmm...
Not familiar with that. Maybe it's not out here on the West Coast.
here is the linkhttp://www.youtube.com/watch?v=aMfSGt6rHos

i didnt realize until now that it is a Coldplay song.
Sure sounds like Leisz! Thanks for sharing!
GFI S10-P Ultra -> Milkman 40w Pedal Steel Mini or 300w Half & Half (or Sarno SGBB/Nashville 112 or '94 Twin Amp or Homebuilt 5e3)
Effects: Cali76-CD Compressor -> EP booster -> Sarno Earth Drive -> Earthquaker Devices Zap Machine -> Earthquaker Devices Grand Orbiter Phaser -> Caitlinbread Dirty Little Secret Mk III -> Malekko Envelope Filter -> Hilton VP -> Pedal Projects Klone -> Tech 21 Blonde -> Strymon Timeline -> TC Electronics Spark Mini Boost -> Strymon Lex -> Strymon Flint
User avatar
Ron Davis
Posts: 580
Joined: 8 Aug 2010 1:24 pm
Location: Lake Arrowhead, California... We're a mile high. ;)

Post by Ron Davis »

Thanx for that link.
:)
Emmons 12 p/p, Revelation, Black Widows, (& way too many assorted goodies...)
Drummer with a pedal steel fantasy. ;)

www.LA-Zep.com
www.Desperado1.com
www.CMWChicagoTribute.com
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

Also worth checking out is Greg's work on the WPA CD a few years ago with Sean and Sara Watkins(Nickel Creek), Glen Phillips (Toad the Wet Sprocket), etc.- the list truly goes on forever and I'm proud and lucky to have Greg as a good friend.
User avatar
Steve Hotra
Posts: 341
Joined: 11 Mar 2008 4:53 pm
Location: Camas, Washington
Contact:

Post by Steve Hotra »

Jim Palenscar wrote:Also worth checking out is Greg's work on the WPA CD a few years ago with Sean and Sara Watkins(Nickel Creek), Glen Phillips (Toad the Wet Sprocket), etc.- the list truly goes on forever and I'm proud and lucky to have Greg as a good friend.
Love that project.
That's where I first discovered Greg's playing.
He is a major pedal steel guitar influence in my playing .. he knows how to play to the song.
Guitars: Rittenberry SD S-10, Gretsch Black Falcon. Effects: Wampler Paisley, Strymon Timeline, Sarno Earth Drive.
Fractal FM9
Amps: Mesa Express 5:25, Jazzkat Tomkat & Boss Katana head / various cabs.
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

Wow- this thread is over 8 years old! Since that time Greg has done tons of projects and for the past few years has been touring w Jackson Browne as well as others. He was having some work done on some of his guitars recently at the shop and I asked him to put some tracks on some Gargeband songs that I was doing and he actually thanked me for letting him play on the whole song if you can believe that saying that he never gets to do that. Poor Greg :) . I've got some of them on a platform called Bandcamp.
User avatar
Paul Stauskas
Posts: 400
Joined: 13 Feb 2015 11:56 am
Location: DFW, TX
Contact:

Post by Paul Stauskas »

Jim Palenscar wrote:Wow- this thread is over 8 years old! Since that time Greg has done tons of projects and for the past few years has been touring w Jackson Browne as well as others. He was having some work done on some of his guitars recently at the shop and I asked him to put some tracks on some Gargeband songs that I was doing and he actually thanked me for letting him play on the whole song if you can believe that saying that he never gets to do that. Poor Greg :) . I've got some of them on a platform called Bandcamp.
Jim, how cool! Would you share the link to your Bandcamp?
User avatar
Bart Bull
Posts: 47
Joined: 8 Oct 2018 8:30 am
Location: New Orleans, USA/Paris FR/Berkeley USSR

Post by Bart Bull »

Just to demonstrate he can of course play country-esque just as gorgeously...
https://www.youtube.com/watch?v=NNgdD_RIepM
Undoubtedly the finest pedal steel player in Paris' 18th Arrondissement
Disaster of Touch, Tone & Taste; Still mastering the manifold mysteries of the Sho-Bud Maverick
Supro, Oahu, pin-striped Rus-Ler SD-10, y tiger-stripe-painted Stella
Hohner Corona Dos en Fa, y Gabanelli en Sol
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

Sure Paul- in some cases you have to put up with my squaking and the credits are posted w each song so you can filter what you listen to. I think Greg is on 4 cuts. We've yet to decide what to call ourselves so just used our initials- JDDJ here. We used to just get together at the shop to play music that we liked for no other reason- then life goes on happened- the singer got divorced- move to Nashville then remarried and moved to Ohio, the bass player died of the same lung disease that took Reece from us, the guitar player/singer went trough a business fiasco, Covid 19 came about, etc. We occasionally communicated, decided that we wanted to continue playing, decided on Garageband as our format and here are some preliminary results. There are some original songs yet to be posted and quite obviously these are covers so the legality of posting these is questionable- hopefully since there is no money involved we won't be pinched :).
User avatar
Brooks Montgomery
Posts: 1674
Joined: 5 Feb 2016 1:40 pm
Location: Idaho, USA

Post by Brooks Montgomery »

Here's a nice cut. Nice singing Jim. Beautiful song.
https://jddj.bandcamp.com/track/it-aint-over-yet
A banjo, like a pet monkey, seems like a good idea at first.
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

Thanks Brooks- gives us something to do during these trying times~~
Post Reply