Strings - Jagwire vs Cobra Coil
Moderator: Shoshanah Marohn
-
- Posts: 7418
- Joined: 12 Jan 2001 1:01 am
- Location: Hendersonville TN USA, R.I.P.
- Contact:
-
- Posts: 3527
- Joined: 16 Jul 2000 12:01 am
- Location: Grove City,Ohio
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Ward Skinner
- Posts: 257
- Joined: 13 Feb 2006 1:01 am
- Location: Mission, TX * R.I.P.
Lee, for what it's worth, I put a set of Geo L Nashville stainless on Tony's Sho Bud a few months ago. Before I put the set on, he saw the 3rd was an .11 and said he can't put those on because they break. I said just give them a try, if it breaks it breaks. I talked to him today, he has not yet broken a string, says he's "freaked out" and can't believe it. And you know he's put a ton of hours on it since then. I know it's not one of the brands for which you are asking comparisons, but I sure do like them.
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
Well, I just put a set of Cobra Coil strings on my Mullen U-12 and thought I would resurrect this old thread.
I've been using Jagwire strings (Stainless) for quite some time now. I started off with Nickle and then settled on the Stainless. I wanted a little extra "crispiness" on the wound strings and the Stainless did that. After replacing the 12-1 pickup with a BL-712 I noticed that the wound strings were a bit too "crispy" sounding, so I decided to go back to Nickle; however, my favorite Jagwire dealer is out of U-12 Jagwire strings right now. So, I ordered some Cobra Coils from Bobbe.
So far, I'm lovin' what I'm hearing. The wound strings sound huge, a bit brighter than Nickle, but not as bright as Stainless. I didn't change the gauge on any of the strings; however, I had to do some tweaking on the pulls on some of the wound strings. That tells me that, perhaps, the core sizes are a bit different than the Jagwires.
Anybody got anything to add, as far as comparing Jagwires to Cobra Coils?
Lee, from South Texas
I've been using Jagwire strings (Stainless) for quite some time now. I started off with Nickle and then settled on the Stainless. I wanted a little extra "crispiness" on the wound strings and the Stainless did that. After replacing the 12-1 pickup with a BL-712 I noticed that the wound strings were a bit too "crispy" sounding, so I decided to go back to Nickle; however, my favorite Jagwire dealer is out of U-12 Jagwire strings right now. So, I ordered some Cobra Coils from Bobbe.
So far, I'm lovin' what I'm hearing. The wound strings sound huge, a bit brighter than Nickle, but not as bright as Stainless. I didn't change the gauge on any of the strings; however, I had to do some tweaking on the pulls on some of the wound strings. That tells me that, perhaps, the core sizes are a bit different than the Jagwires.
Anybody got anything to add, as far as comparing Jagwires to Cobra Coils?
Lee, from South Texas
- Ward Skinner
- Posts: 257
- Joined: 13 Feb 2006 1:01 am
- Location: Mission, TX * R.I.P.
-
- Posts: 1096
- Joined: 6 Nov 1999 1:01 am
- Location: Qualicum Beach Vancouver Island B.C. Canada
Jagwires most definate for me as they outlast anything I've ever bought since the mid fifties with all the different makes out there to choose from.
I've found them to give the brightest tone and the longest life of any string. In fact on one of the other string threads, I'd mentioned that my third string was kept on my D10 Z.B. for 14 months with gigging three times every weekend with an odd mid week thrown in.
All Z.B.est.
Bob Mainwaring.
I've found them to give the brightest tone and the longest life of any string. In fact on one of the other string threads, I'd mentioned that my third string was kept on my D10 Z.B. for 14 months with gigging three times every weekend with an odd mid week thrown in.
All Z.B.est.
Bob Mainwaring.
-
- Restricted
- Posts: 4839
- Joined: 4 Apr 2005 12:01 am
- Location: Seminary, Mississippi, USA (deceased)
strings
Tried both before. Definitely Cobra Coils for me. I'm currently using nothing but Frenchy's Steel Mill strings. Hadn't broke one in three years. .012 for high G# also. CC's are fine strings though. They come from Bobbe's, so you know they've got to be top of the line.
- Shannon Cooke
- Posts: 92
- Joined: 13 Feb 2006 1:01 am
- Location: Tennessee, USA
Cobra Coils for me
After trying several different brands it's the cobra's that do the trick! I put alot of hours on my steel and as far as lasting and tone the cobra coils have been a great investment. Bobbester won't steer you wrong!
shannon
shannon
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
The Cobra Coils seem to have slightly tighter tension compared with the same gauge on other manufacturer's strings. Might be my imagination.
I think the Cobra's are excellent - they are consistent and corrode far less than the Jag's. I asked Bobbe how the Cobra's came into being, and it was an interesting story.
I think the Cobra's are excellent - they are consistent and corrode far less than the Jag's. I asked Bobbe how the Cobra's came into being, and it was an interesting story.
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Infinity SD10 (4+5) Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
- John DeBoalt
- Posts: 230
- Joined: 8 Apr 2000 12:01 am
- Location: Harrisville New York USA
I used Cobra Coils before I tried Jagwire, and was happy with them. The biggest thing I've noticed about the Jagswire, the T. White set anyway, is the life I get from the .0115 3rd string. I have yet to have one actually break. I've changed it out before a gig just for safety sake. I'm going to stay with the one I currently have on the guitar just to see how long it will last. I really don't remember if I picked up on a difference in tone when I first installed them, and both sets seemed to wind on about the same. John
Equipment: Carter D10, Zum Stage1,
Wechter Scheernhorn Reso, Deneve Reso, Fender Jazzmaster, Martin D16, Walker Stereo Steel amp, TC Electronics M One effects unit, JBL 15" speaker cabs,Peavey Nashville 1000,Peavey Revoloution 112, Morrell Lap Steel, Boss DD3 delay,others
Wechter Scheernhorn Reso, Deneve Reso, Fender Jazzmaster, Martin D16, Walker Stereo Steel amp, TC Electronics M One effects unit, JBL 15" speaker cabs,Peavey Nashville 1000,Peavey Revoloution 112, Morrell Lap Steel, Boss DD3 delay,others
Jag 3rd string
The Jagwire 3rd strings I've been using also last forever. Only thing is the .018's don't. Anyone else find this to be the case?
-
- Posts: 394
- Joined: 14 Sep 2008 3:58 pm
- Location: Hendersonville, Tennessee, USA
Strings
I was told by a "reputable source" that Jagwires were made by SIT. (Not that it matters...)I'm sure someone out there knows if that is true.
- Ward Skinner
- Posts: 257
- Joined: 13 Feb 2006 1:01 am
- Location: Mission, TX * R.I.P.
These strings were put on around Sept of '07. Played a benefit Monday afternoon. Jealous Heart, Tony's band, played after us. Took a look at Tony's steel, his Sho-Bud has turned back into a Sho-Crud due to heavy accumulation of dust, but damn if the same strings are still on there. He thought maybe this was a new Guinness world record?Ward Skinner wrote:Lee, for what it's worth, I put a set of Geo L Nashville stainless on Tony's Sho Bud a few months ago. Before I put the set on, he saw the 3rd was an .11 and said he can't put those on because they break. I said just give them a try, if it breaks it breaks. I talked to him today, he has not yet broken a string, says he's "freaked out" and can't believe it. And you know he's put a ton of hours on it since then. I know it's not one of the brands for which you are asking comparisons, but I sure do like them.
- Willis Vanderberg
- Posts: 2389
- Joined: 13 Mar 2002 1:01 am
- Location: Petoskey Mi
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
i put new sets of cobra coils on my zum...i almost never change or break strings. before i did a gig the 11 on my 3rd string broke. so i put a 12 on it. still haven't gigged with it. i rarely change whole sets but a friend gave me these. i use 10's normally and they don't break. actually, i've noticed 11's break more than any size. am looking forward to hearing what the cobra coils sound like at performance level with my old emmons pickup zum. usually sounds great anyway!
i've been trying to bond with my old emmons with the whatever old strings on it lately. sounded great the other night! i've always just grabbed whatever single strings i can find at a music store and never really had a problem except for an occassional crappy batch that all break...then i go back at yell at the pimply-faced music store salesman until they give me something else free!
i've been trying to bond with my old emmons with the whatever old strings on it lately. sounded great the other night! i've always just grabbed whatever single strings i can find at a music store and never really had a problem except for an occassional crappy batch that all break...then i go back at yell at the pimply-faced music store salesman until they give me something else free!
Well I feel like an alien here with d'Addario's on my GFI (as no other mentioned them here before). But I change 'em only after every six months or so, 'cause they were trusty and I have no tone comparsion with others.
GFI Ultra SD-10, BearCreek Weissenborn, Hermann Baritone Weiss, National Polychrome Tricone, Fender Champ Lapsteel, Quiter Micropro Mach 2 HD, Nashville 112, Zirconia bars, Bob Perry picks...
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Danny Hullihen
- Posts: 2415
- Joined: 2 Aug 1999 12:01 am
- Location: Harrison, Michigan
- Contact:
Re: Strings
Wrong! So much for reputable sources.David Pinkston wrote:I was told by a "reputable source" that Jagwires were made by SIT. (Not that it matters...)I'm sure someone out there knows if that is true.
- Craig A Davidson
- Posts: 3848
- Joined: 16 Feb 2001 1:01 am
- Location: Wisconsin Rapids, Wisconsin USA
- Contact:
chris ivey wrote:tonu...d'addarios are what most stores here sell as individual strings and they sound great to me. i really can't imagine any string making nearly the difference to my sound that couldn't be overcome with practice and musical ability. ...much more important than brand of string!
Chris, Contact Danny and try a set of Jagwires. You will be impressed. I have been using them for about five years and have broken three strings in that time and all were because of something I did and not the string's fault. Jag's also hold their tone longer so you don't have to change as often.