Amplifiers, effects, recording equipment, seats, racks, parts, or anything else.
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 29 Aug 2007 6:00 pm
Last 100 almost gone. I will have another 100 in this week.
Larry Hamilton
Posts: 1277 Joined: 20 Aug 2003 12:01 am
Location: Keller, Texas, USA
Post
by Larry Hamilton » 29 Aug 2007 7:18 pm
Just received minie in the mail today. Hope to get them in this weekend. I am sure I'll be posting later raving about them. I'll be putting them in a PV 112.
Keep pickin', Larry
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 4 Sep 2007 7:58 am
Just got in 100 last week.
Larry Hamilton
Posts: 1277 Joined: 20 Aug 2003 12:01 am
Location: Keller, Texas, USA
Post
by Larry Hamilton » 4 Sep 2007 8:13 am
Got mine installed 2-3 days ago. Before installation I played for a while then did the installation. Went back to see what it sounded like with the same settings, well folks it sure is a lot cleaner sounding. No major amp setting changes, just a lot cleaner sound. I lowered my SGBB z knob setting just a little to warm it up a little. Money well spent. GREAT job as always Ken. Thanks!
Keep pickin', Larry
Buck Grantham
Posts: 3155 Joined: 30 Sep 1999 12:01 am
Location: Denham Springs, LA. USA
Post
by Buck Grantham » 4 Sep 2007 8:02 pm
Ken ,I am e-mailing you for the price for the kit for a 1000 peavey amp . Thanks ,,, Buck Grantham
Billy Carr
Restricted
Posts: 4839 Joined: 4 Apr 2005 12:01 am
Location: Seminary, Mississippi, USA (deceased)
Post
by Billy Carr » 7 Sep 2007 1:18 am
Email me the price for a NV-112. Tommy Young speaks highly of these. That's good enough for me!
Daniel J. Cormier
Posts: 4470 Joined: 30 Jan 2002 1:01 am
Location: Lake Charles, LA, USA
Post
by Daniel J. Cormier » 9 Sep 2007 6:13 pm
Guys this is the easiest mod you'll ever do. Even a Caveman can do it. Just bought 3 more sets.
Buck, Send me an email Monday I'll see about get a kit to you.
Tim Harr
Posts: 2476 Joined: 4 Aug 1998 11:00 pm
Location: Dunlap, Illinois
Post
by Tim Harr » 11 Sep 2007 8:21 am
Ken is this kit mainly for the Pre Amp Section ....if I understand this correctly.
If the NV 112 was used with another Pre amp.. would these chips make any difference?
Thanks for all of your contributions to forum discussion!
Tim
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 11 Sep 2007 9:13 am
It is just the preamp section that is modded. If you bypass it and use the power amp input with another preamp nothing is gained
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 17 Sep 2007 2:01 pm
I am out of stock until Friday. I will have 250 coming in this time!
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 19 Sep 2007 2:43 pm
250 chips arrived today! I am filling all back orders today and shipping tomorrow.
Thanks
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 27 Sep 2007 4:03 am
Just a note to let everyone know we will be on vacation Oct 15 through about Nov 7th.
I have about 200 chips in stock at this time.
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 11 Nov 2007 3:58 pm
I have about 150 chips in stock now.
Phil Halton
Posts: 316 Joined: 7 Aug 2007 3:55 pm
Location: Holyoke, Massachusetts, USA
Post
by Phil Halton » 11 Nov 2007 7:54 pm
[quote="Ken Fox"]I have about 150 chips in stock now.[/quote]
I'm curious, is this mod something a complete electronics dummy could do? Is there any soddering involved?
Disclaimer! I make no warranty on the manure I've been spreadin' around here.
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 12 Nov 2007 6:22 am
These are plug in chips, no soldering.
Ronnie Long
Posts: 67 Joined: 22 Dec 2003 1:01 am
Location: Yadkinville, North Carolina, USA
Post
by Ronnie Long » 12 Nov 2007 7:48 pm
Ken could you send me the price for the mod for a nashville 1000
Tommy Huff
Posts: 764 Joined: 11 Jun 2007 11:45 am
Location: Texas, USA
Post
by Tommy Huff » 14 Nov 2007 7:04 pm
hi Ken, on Mike Brown's post he says nash 400's with ser# 08575182 and after already have the peavey tone mod. what is this compared to other mod's i have heard of for nash 400's thanx Tommy
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 14 Nov 2007 7:56 pm
Email sent to explain the difference, Tommy.
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 29 Nov 2007 7:14 pm
Less than 40 chips in stock. We will be out of town for a few days after tomorrow afternoon, headed for the Daleville. AL Show! Should be back NLT next Wednesday,
Ulf Edlund
Posts: 965 Joined: 6 Mar 2003 1:01 am
Post
by Ulf Edlund » 30 Nov 2007 3:26 am
Ken, please email me information about using them in a Session 500, along with pricing.
Thanks
Ulf
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 19 Dec 2007 5:16 pm
Just got in another 100 chips.
Ken Fox
Posts: 9620 Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA
Post
by Ken Fox » 5 Jan 2008 8:57 am
I have 5 kits ready to ship. Will order more next week.
Jay Hudson
Posts: 69 Joined: 14 Aug 2007 1:02 pm
Location: Austin, Texas
Contact:
Post
by Jay Hudson » 8 Jan 2008 11:18 am
Hey guys I'm confused.
Do new Nash 112's already have the Burr Brown's installed?
Also Ken please e-mail with the price.