Hello ZB world.
I am refurbing ZB D10 #0506, and have had to remove the pickups to sort out a wiring problem, which I have now done on the pickups as currently wired. However, my old mate Frank Bloomfield was here with me today, and reckoned that the pickups are not original.
I attach some photos to see if anyone can ID them, and also to see if anyone knows how to wire them up properly. As you will see, there is provision for 4 taps plus the earth. The tap points measure 20k, 16k, 12k and 8k respectively, but only the 3 lower values have been wired up through the switches. It would seem a shame not to maximise the number of combinations - but I have no idea where to start other than just switching in the 4th tap.
For reference, the pickups are potted into plastic housings, have Allen key adjustable pole pieces, and have the earth sign and impedance values scratched in the potting compound, possibly by the manufacturer, but I don't think this is the case as it has been done by hand.
Thank you for reading - hope you can help.
Regards,
Mick Breach
![Image](http://bb.steelguitarforum.com/userpix0806/7515_DSCF2150_2.jpg)
I'm gonna nail that lick if its the last thing I do. And the way its going, it probably will be.....