| Author |
Topic: Trans Tube Fex? Help! |
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 25 Jun 2007 7:46 am |
|
| Hey, guys. I have a Peavey Trans Tube Fex that I have no manual to and it looks fairly uncomplicated, but when I turn it on the lights flash and it reads something about an interface error. This is the first time I turned the thing on. Help, please! Thanks |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 25 Jun 2007 10:09 am Transtube Fex
|
|
I suggest that you try reinitializing the unit by pressing and holding the DOWN and RIGHT arrow keys and powering up the unit. If this doesn't correct the situation, I suggest that you have a technician benchtest and repair the unit for you.
Here is a link to our authorized service center site;
http://www.peavey.com/support/dealerlocator/
If you have further questions, please feel free to contact me by calling toll free at 1-877-732-8391, ext. 1180.
Thanks,
Mike Brown
Peavey USA |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 26 Jun 2007 5:23 am
|
|
| Thanks, Mike! It worked. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Jun 2007 5:37 am Transtube Fex
|
|
| I'm glad that it solved your problem. Glad that I could assist. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 26 Jun 2007 8:10 am
|
|
Alan, if you need some steel programs to get started with, there are some TranstubeFex programs listed on my web site, that I used when I had one.
www.gulfcoaststeelguitar.com |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 26 Jun 2007 8:51 am
|
|
Check your battery ASAP. This is the kind of damage that will eventually be caused by the battery. They all leak eventually!
 |
|
|
|
Mike Fried
From:
Nashville, TN, USA
|
Posted 26 Jun 2007 7:47 pm
|
|
Alan, the manual (in .pdf format) can be downloaded from the Peavey website's support/archive section. I just did that for one I serviced for a friend, and found a lot of useful information in it.
_________________
Visit my music page at http://facebook.com/drfried |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 29 Jun 2007 8:02 pm
|
|
| Thanks, guys, for all the helpful info! |
|
|
|
