| Author |
Topic: nv1000 mod chip |
Todd Herring
From:
Florida, USA
|
Posted 8 Jun 2007 2:35 pm |
|
is there a mod chip or something for this amp and if, is it good.
_________________
My Setup:
Fesseden E9th
Hilton Optical Volume Pedal
Peavey Nashville 1000
Pod XT with foot control
Peterson Strobe Flip
Roc-N-Soc Throne With Backrest
http://www.actionrecordingstudio.com/toddbio.html |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 11 Jun 2007 6:21 pm
|
|
| To my knowledge, there's no "mod" available for a NV 1000. But that's not saying that Ken or Brad couldn't help it a little if they tried! I tried one on a couple of occasions, but was disappointed because of the lack of bottom end and warmth. Tons of mid-range power, but the solid bass I'd expected for an amp this big and this powerful...just wasn't there. |
|
|
|
Bobby Rountree
From:
San Angelo, Texas, USA - R.I.P.
|
Posted 11 Jun 2007 6:36 pm
|
|
Ken Fox has the chips...they come with instructions and are easy to install. I installed them in my NV1000 and NV112.....and both sound great. Do a search on Ken Fox and you will find him.
_________________
Sho-Bud LDG....NV1000
Hilton Pedal
Fender Jazz bass and MB210 amp |
|
|
|
Jonathan Cullifer
From:
Gallatin, TN
|
Posted 11 Jun 2007 8:38 pm
|
|
| The NV1000 and 112 have the exact same preamp, so the 112 mod works in the 1000. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 12 Jun 2007 5:38 am Mod For Nashville 1000
|
|
Many different IC's can be substituted for the factory chips in any amplifier, but it would take a lot of time in R & D to actually change the tone of the amplifier. A stock Nashville 1000 should provide plenty of low end for a steel guitar's frequency response. Check your guitar/pickups to ensure that they are producing enough low end for you, ie; try another guitar.
We designed the Nashville 112 and 1000 amplifiers with our tone mod already incorporated into the circuit. So, both can duplicate the C6th and E9th tunings. Let me know if you need further assistance.
Mike Brown
Peavey USA |
|
|
|
Todd Herring
From:
Florida, USA
|
Posted 19 Jun 2007 1:43 am mike brown
|
|
I ordered the chip mod before I got the amp.
Let me tell you a story about my nashville 1000 amp.
I drove 200 miles round trip to get one, got it home and it was DOA, disorting really bad at any volume.
Dealer ordered another, drove another 200 miles got it home and it was distorting at low volume. I was not happy. I took the speaker basket off and there was a little plastic hair thing in there. I cleaned it out and it sounds great! I have been a peavey person for 20 years. The last 5 years of buying peavey equip (Your Highend PA Gear) I have had problems with your speakers.
I will not be putting in the mod chip!
_________________
My Setup:
Fesseden E9th
Hilton Optical Volume Pedal
Peavey Nashville 1000
Pod XT with foot control
Peterson Strobe Flip
Roc-N-Soc Throne With Backrest
http://www.actionrecordingstudio.com/toddbio.html |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 19 Jun 2007 2:03 am
|
|
Both the 1000 and 112 are great just the way they are. Each has it's own sound. If you like the amp and buy it, why modify it? If you modify it, to me it sounds like you didn't like the sound.
I'm an ex amp tech and always considered myself a "repair" tech that made things work like they were originally designed by engineers. I don't consider myself an "Engineer" and redesign items.
I tried the chip swap in my NV112 and took it out after a week and several gigs. The 112 no longer sounded like a 112. |
|
|
|
