How to do a choke
Moderator: Brad Bechtel
-
- Posts: 1734
- Joined: 8 Jun 2001 12:01 am
- Location: Houston, Texas, USA
How to do a choke
I have been struggling to do a "choke"; raising a high B string to C or a any of the top three strings a half step.
I hold my bar in the traditional manner. but don't know the technique for using my middle or ring finger. Do you pull the string to the side or lift it while holding that string down with the bar...or what? Is there some material that explaines or shows this process?
I appreciate all suggestions.
I hold my bar in the traditional manner. but don't know the technique for using my middle or ring finger. Do you pull the string to the side or lift it while holding that string down with the bar...or what? Is there some material that explaines or shows this process?
I appreciate all suggestions.
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
-
- Posts: 1734
- Joined: 8 Jun 2001 12:01 am
- Location: Houston, Texas, USA
Personnaly, I never liked the term "choke" ... it's got a bad ring to it. The above image is blurry, but you can see that I'm pulling the third string sharp with my 2nd finger supported by my ring finger. Using supporting fingers is a key concept to remember. I'm not doing it here, but I also sometimes drop the thumb to the side of the neck to further support the bend. You never pull up ... just straight back toward your stomach and paralell to the fretboard. You'll need to build up some under-used muscles as well as develop pulling-hand calluses, so my advice is to pratice it very slowly and in small increments so you don't fatigue your hand muscles. Here are some pull-string licks:
http://steelguitarforum.com/Forum8/HTML/000052.html
http://steelguitarforum.com/Forum8/HTML/000055.html
This arrangement of Bud's Bounce in E tuning using string pulls to imitate pedal steel licks:
http://steelguitarforum.com/Forum8/HTML/001097.html
<font size="1" color="#8e236b"><p align="center">[This message was edited by Andy Volk on 29 June 2006 at 08:00 AM.]</p></FONT>
- Roy Thomson
- Posts: 4386
- Joined: 4 Aug 1998 11:00 pm
- Location: Wolfville, Nova Scotia,Canada
I use left hand mid finger also.
You have to make sure the pull is in
a somewhat upward motion so the string
maintains contact with the bar.
With that in mind it is just a matter
of practice and it does not come easy.
------------------
http://www.clictab.com/RoyT/Roy_Thomson_Steel_Courses.htm
You have to make sure the pull is in
a somewhat upward motion so the string
maintains contact with the bar.
With that in mind it is just a matter
of practice and it does not come easy.
------------------
http://www.clictab.com/RoyT/Roy_Thomson_Steel_Courses.htm
-
- Posts: 1734
- Joined: 8 Jun 2001 12:01 am
- Location: Houston, Texas, USA
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
Andy
Why don't you just use your ring finger...it's easier, and you have better control of your bar? You're using your ring finger to back up your middle finger anyhow.
I've been doing string pulls for a hundred years, and I never got any callouses on my finger.
String pulls are real easy...but it does take a lot of practice and co-ordination to get it right.
Happy pulling
Harry
Why don't you just use your ring finger...it's easier, and you have better control of your bar? You're using your ring finger to back up your middle finger anyhow.
I've been doing string pulls for a hundred years, and I never got any callouses on my finger.
String pulls are real easy...but it does take a lot of practice and co-ordination to get it right.
Happy pulling
Harry
Kayton Roberts has a huge callus from pulling strings. You must have superman hands, Harry. Why not give your hand the most support you can? Using supporting fingers for pedal steel-like bends on a standard guitar is recommend by masters of the technique like Arlen Roth. In my book, it just makes sense for lap steel too. But if your way works for you more power to you! . One other thing to keep in mind about string pulls is you pretty much momentarilly lose your vibrato when you're pulling.
-
- Posts: 1053
- Joined: 27 Jul 2000 12:01 am
- Location: Columbia, MO, USA
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
-
- Posts: 735
- Joined: 24 Oct 2004 12:01 am
- Location: Orlando, Florida, USA; Formerly, Edison, NJ
Tom,
Awhile back, I saw Harry at a Steeljam and I have to tell you, he is really good with String Pulls, as well as other techniques. We were amazed.
In my case, I agree with Roy's advise to keep the string your pulling against the bar. It's a slight upward pressure when you pull the string back. Andy's advise works too!!
Either way, the key is to work at it so it becomes 2nd nature. IMHO: It really doesn't take that long.
You'll be very glad to have this "must" trick in your arsenal and like Harry, not even think about it when you do it. TX
Rgsd,
Ron
Awhile back, I saw Harry at a Steeljam and I have to tell you, he is really good with String Pulls, as well as other techniques. We were amazed.
In my case, I agree with Roy's advise to keep the string your pulling against the bar. It's a slight upward pressure when you pull the string back. Andy's advise works too!!
Either way, the key is to work at it so it becomes 2nd nature. IMHO: It really doesn't take that long.
You'll be very glad to have this "must" trick in your arsenal and like Harry, not even think about it when you do it. TX
Rgsd,
Ron
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
- Jeff Strouse
- Posts: 1628
- Joined: 20 Apr 2002 12:01 am
- Location: Jacksonville, Florida, USA
-
- Posts: 1632
- Joined: 4 May 2003 12:01 am
- Location: Oahu, Hawaii USA
- Contact:
You "disappoint" me, Howard. I dropped right in here thinking for sure that with this barn door wide open in the wind, you would have dropped the bombshell of the year!
Aloha,
DT~
<font size="1" color="#8e236b"><p align="center">[This message was edited by Denny Turner on 29 June 2006 at 08:10 PM.]</p></FONT>
Aloha,
DT~
<font size="1" color="#8e236b"><p align="center">[This message was edited by Denny Turner on 29 June 2006 at 08:10 PM.]</p></FONT>
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
-
- Posts: 800
- Joined: 21 Sep 2004 12:01 am
- Location: Studio City, California, USA
- Contact:
- Dwayne Martineau
- Posts: 249
- Joined: 17 Feb 2004 1:01 am
- Location: Edmonton, Alberta, Canada
-
- Posts: 92
- Joined: 2 Jul 2006 12:01 am
- Location: California, USA
- Harry Dietrich
- Posts: 611
- Joined: 16 Dec 2002 1:01 am
- Location: Robesonia, Pennsylvania, USA, R.I.P.
- Dwayne Martineau
- Posts: 249
- Joined: 17 Feb 2004 1:01 am
- Location: Edmonton, Alberta, Canada
<SMALL>You "disappoint" me, Howard</SMALL>
Denny, I've got other fish to fry....stay tuned to No Peddlers. New material on the way.....
BTW, I use string pulls on G tuned dobro, pulling the 2nd string back & forth will give a pedal effect. Also tuning the B to C and pulling will do the same with a ninth flavor.
On C6, I like to pull the 2nd string, C to C# to give me a major triad or a dom7.
A great technique to learn. And yes, I've also seen Harry a pullin' & a chokin' and he gets a lot of milage out of his tuning.
-
- Posts: 1081
- Joined: 20 Jul 2004 12:01 am
- Location: Silver Spring, Maryland, USA