How I Cut Half The Cabinet-Drop... And Got Better Sound
Moderator: Shoshanah Marohn
- Charlie McDonald
- Posts: 11054
- Joined: 17 Feb 2005 1:01 am
- Location: out of the blue
- Michael Douchette
- Moderator
- Posts: 3458
- Joined: 4 Aug 1998 11:00 pm
- Location: Gallatin, TN (deceased)
- Contact:
Seems like it's a generally accepted principle with any instrument that the heavier a string you can use, the better the tone. I know I had a lap steel that came back from a repair once. It had been restrung by a "tech" (guitar player at the Gibson Custom Shop) with really light strings. I put the bar on the strings, and they went straight down to the fretboard... couldn't even play it!
I don't think lighter is the answer here...
I don't think lighter is the answer here...
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
since we are talking about this stuff..has anyone ever tried boiling their strings before putting em on the guitar? I ask because I read that Eddie Van Halen used to do that claiming the striongs stayed in tune better after boiling them for a few minutes.
dont know if that would do anything for cab drop. I havent tried it and doubt I will , my guitar stays in tune pretty well as is. anyone else tho?
dont know if that would do anything for cab drop. I havent tried it and doubt I will , my guitar stays in tune pretty well as is. anyone else tho?
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Re: boiling strings, I really don't think boiling them in water would cause any metallurgical changes at all, the temperature's just not high enough.
Also, lighter guages (than what we use now) would exacerbate tuning problems, as they would stretch more. (Plus, they'd sound very "whiny".) Cabinet drop on all modern pro-type steels I've played is minimal, and the "cabinet drop" issue is a red herring, nowadays.
Throw away your digital tuner and just play the durn thing!
Also, lighter guages (than what we use now) would exacerbate tuning problems, as they would stretch more. (Plus, they'd sound very "whiny".) Cabinet drop on all modern pro-type steels I've played is minimal, and the "cabinet drop" issue is a red herring, nowadays.
Throw away your digital tuner and just play the durn thing!
re boiling strings
A friend of mine swore by it. He played 6 string and would take the strings off periodicly [sp] clean them and boil them in kerosene, put em back on. Said it was like putting new strings on.
FWIW...This is a true story.
FWIW...This is a true story.
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
Steeling for Jesus now!!!
- Andy Sandoval
- Posts: 5176
- Joined: 22 Jul 2004 12:01 am
- Location: Bakersfield, California, USA
- Contact:
- ray qualls
- Posts: 2980
- Joined: 6 Feb 1999 1:01 am
- Location: Baxter Springs, Kansas (deceased)
Cabinet Drop
Don't remember who posted this pic but I'm sure lighter strings wouldn't hurt.
Ray Qualls
Member(KSGA)
Inducted into KSGA
Steel Guitar Hall of Fame 2008
Member(KSGA)
Inducted into KSGA
Steel Guitar Hall of Fame 2008
-
- Posts: 73
- Joined: 17 Jan 2007 5:22 pm
- Location: Queensland, Australia
I can't talk with experience for pedal steels, but certainly the adage that "thicker strings=better tone" for 6-string guitars is a bit of a myth. It's fully related to how hard you pick the string.
If you dig into the strings (a la Stevie Ray) then you'll need a heavy gauge. If, like me (and Brian May, and Jeff Beck and others), you have a very light touch, thick strings sound awful and dull (I use 9s on my strats and haven't broken a string for at least 15 years).
I've read a good explanation somewhere about the physics involved, and it made sense at the time (although I promptly forgot it!). So, I would imagine that if you have a soft touch as a steel player, thin strings could well sound much better.
Matt
If you dig into the strings (a la Stevie Ray) then you'll need a heavy gauge. If, like me (and Brian May, and Jeff Beck and others), you have a very light touch, thick strings sound awful and dull (I use 9s on my strats and haven't broken a string for at least 15 years).
I've read a good explanation somewhere about the physics involved, and it made sense at the time (although I promptly forgot it!). So, I would imagine that if you have a soft touch as a steel player, thin strings could well sound much better.
Matt
-
- Posts: 22
- Joined: 22 Dec 2006 1:01 am
- Location: Moorhead Minnesota, USA
- Contact:
I agree. I cant imagine a 5/8" steel rod would sound too good as a 1st string.Matt Chase wrote:I can't talk with experience for pedal steels, but certainly the adage that "thicker strings=better tone" for 6-string guitars is a bit of a myth. It's fully related to how hard you pick the string.
If you dig into the strings (a la Stevie Ray) then you'll need a heavy gauge. If, like me (and Brian May, and Jeff Beck and others), you have a very light touch, thick strings sound awful and dull (I use 9s on my strats and haven't broken a string for at least 15 years).
I've read a good explanation somewhere about the physics involved, and it made sense at the time (although I promptly forgot it!). So, I would imagine that if you have a soft touch as a steel player, thin strings could well sound much better.
Matt
- Michael Douchette
- Moderator
- Posts: 3458
- Joined: 4 Aug 1998 11:00 pm
- Location: Gallatin, TN (deceased)
- Contact:
Let's use a modicum of common sense, shall we?I agree. I cant imagine a 5/8" steel rod would sound too good as a 1st string.
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
I think that it would be hard to play in tune with strings that light. The weight of the bar would be a much greater factor, bending the strings downward more at the point of contact.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
-
- Posts: 22
- Joined: 22 Dec 2006 1:01 am
- Location: Moorhead Minnesota, USA
- Contact:
OK 5/16"Michael Douchette wrote:Let's use a modicum of common sense, shall we?I agree. I cant imagine a 5/8" steel rod would sound too good as a 1st string.
I think almost any guage can work. It depends on the sound you want or what sound fits the song you are playing. Not everyone wants a full thick sound not everyone wants a thin sound. Perhaps a smaller diameter bar would help with the smaller guage strings.
- David Mason
- Posts: 6072
- Joined: 6 Oct 2001 12:01 am
- Location: Cambridge, MD, USA
Duane Allman and Carlos Santana used .009" gauge string sets - that's why they got that thin, wimpy tone on "Black Magic Woman" and "Live at the Fillmore" I spoze. Hendrix used .009's tuned down low, John McLaughlin used .008's to .038's on his fire-breathing dragon stuff with the first Mahavishnu Orchestra - I guess we're just lucky he didn't want a good tone....
I usually use a standard gauge C6th string set tuned down to Bb6th and the tone on any given pitch is fatter and rounder than tuned up full - if thinner strings need less tension to reach an equivalent pitch, isn't that the same thing? It plain defies "common" sense. Until you subject the conjectures to some serious spectrographic analysis which proves something (oops, sounds like work), and then ALSO bind your results to a commonly-agreed upon standard of what good tone actually IS (Good luck with that!), all this tone talk is just synapse-squeezings anyway. I have had the experience with six-strings that a really heavy, dense guitar seems to "swallow up" light gauge strings and needs heavier ones to sound good, but I can only think it's something to do with a percentage weight difference - with even the lightest steel guitar at well ove 20 lbs., it's hard to see that that could matter.
I usually use a standard gauge C6th string set tuned down to Bb6th and the tone on any given pitch is fatter and rounder than tuned up full - if thinner strings need less tension to reach an equivalent pitch, isn't that the same thing? It plain defies "common" sense. Until you subject the conjectures to some serious spectrographic analysis which proves something (oops, sounds like work), and then ALSO bind your results to a commonly-agreed upon standard of what good tone actually IS (Good luck with that!), all this tone talk is just synapse-squeezings anyway. I have had the experience with six-strings that a really heavy, dense guitar seems to "swallow up" light gauge strings and needs heavier ones to sound good, but I can only think it's something to do with a percentage weight difference - with even the lightest steel guitar at well ove 20 lbs., it's hard to see that that could matter.
- David Doggett
- Posts: 8088
- Joined: 20 Aug 2002 12:01 am
- Location: Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
A thicker string for the same pitch gives a thicker and louder tone. At least that's what I find when I switch an 0.009 G# string for an 0.012. I do that to get a better balance among the strings. If they were all lighter gauge, that might not be relevant. Thinner strings tend to have more sustain and richer overtones. At least that is what I find in comparing my thin strings to my heavy strings, but they are playing different pitches of course. Within reason, I guess lighter gauge strings across the board could be usable and would lessen the cabinet drop. It all depends on what you can tolerate in terms of a softer feel with the bar, intonation problems, and what your guitar can handle in terms of the longer pulls.
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
-
- Posts: 4385
- Joined: 10 May 2004 12:01 am
- Location: San Antonio, Texas, USA
Strings
Mickey If It works For You That is just Wonderful. Most of the clowns On this forum Strings are so rusted Up they cant tell what gauge they Are. And the rest of Us clowns Are too lazy To change the strings Or dont Know How? bOb sells The Jaguars I Likeem. Randy.
-
- Posts: 395
- Joined: 3 Mar 2006 1:01 am
The clincher would be to put on a set of heavier gauge strings and see if the cabinet drop increases. I'm also a string boiler from way back but for the purpose of making old dead sounding strings sound sparkling new (applies to wound strings). No biggie on guitar strings but a real life saver on expensive bass srtings.
My site
My site
- Per Berner
- Posts: 1808
- Joined: 10 Aug 2004 12:01 am
- Location: Skövde, Sweden
- Contact:
Try bending a set of 0.013s - not much rock to be found there. I bet the only reason Hendrix and those other 6-string shredders use very light strings is/was their need to bend strings with their fingers and achieve other effects only possible with soft strings. But this is totally NOT an issue for pedal steel, and I think b0b made the ultimate point – ultralight strings will detune severely from bar pressure alone, which will cause much bigger problems than some slight cabinet drop.
- David Mason
- Posts: 6072
- Joined: 6 Oct 2001 12:01 am
- Location: Cambridge, MD, USA
Unless, you don't press down too hard... I usually use an "ultralight" bar, and since I'm used to it most of the pronouncements of what it should, and shouldn't, do don't seem to bear fruit. Some guitarists like John McLaughlin and Ingwie Malmsteen (!) use ultralight strings, on scalloped fretboards no less , with high action , and they achieve great intonation - this is because they are far, far better at what they do, than I am at what I do....ultralight strings will detune severely from bar pressure alone
Practicing sixteen hours a day, at least for the first decade or so, seems to flatten out a lot of those pesky kinks that so afflict those of us who would rather post than play.
- Dennis Schell
- Posts: 307
- Joined: 30 Jan 2007 3:41 pm
- Location: Shingletown, Shasta county, Kalifornia
LOL, I know whatcha mean! Myself and most of my electric guitar pickin' pals use .009 to .042 and I rarely see anyone buy anything else when hangin' around the music store unless it's .008 to .038...David Mason wrote:Duane Allman and Carlos Santana used .009" gauge string sets - that's why they got that thin, wimpy tone on "Black Magic Woman" and "Live at the Fillmore" I spoze. Hendrix used .009's tuned down low, John McLaughlin used .008's to .038's on his fire-breathing dragon stuff with the first Mahavishnu Orchestra - I guess we're just lucky he didn't want a good tone....
(Personally, I find that too light, like playing on cooked spagetti, no "feel" for bends and too much "fret buzz". But those with a lighter "touch" and setup than me seem to get along fine with them.) If there's a "universal" string set for 90% of the players today though, I'd venture to guess that set is .009 to .042 for electric "lead" guitar. I doubt that many think there's anything "wrong" with their tone because of it...
JMO,
Dennis
Seems to me that in the last few decades, NO one uses the biggest Gretsch flatwounds they can find like I did as a youngster listening to Chet Atkins!
"Bucks Owin"
-
- Posts: 395
- Joined: 3 Mar 2006 1:01 am
ML, Once when i replaced the 3rd string with a heavier gauge string cause it was all i had there there was a noticable decrease, actually an elimination of, PSE (pesky sitar effect). But this may have been a problem specific to my instrument, being an older student model.
My site
My site
-
- Posts: 3942
- Joined: 23 Dec 2005 1:01 am
- Location: Maryland, USA
Regarding what David Mason wrote about Santana's, Allman's, Hendrix's and McLaughlin's tone with light gauge strings:
The lion's share of their tone recipes is the AMP! Any guitar with any strings is going to sound fat when played through an overdriven tube amp.
A steel player who wants to sound crystal-clean through a 300-watt solid-state amp has different considerations.
(Just a personal aside about McLaughlin with Mahavishnu: fantastic compositions, fantastic playing, but, IMO, for the most part, his tone sucked!)
The lion's share of their tone recipes is the AMP! Any guitar with any strings is going to sound fat when played through an overdriven tube amp.
A steel player who wants to sound crystal-clean through a 300-watt solid-state amp has different considerations.
(Just a personal aside about McLaughlin with Mahavishnu: fantastic compositions, fantastic playing, but, IMO, for the most part, his tone sucked!)
- Dennis Schell
- Posts: 307
- Joined: 30 Jan 2007 3:41 pm
- Location: Shingletown, Shasta county, Kalifornia
Brint Hannay wrote:Regarding what David Mason wrote about Santana's, Allman's, Hendrix's and McLaughlin's tone with light gauge strings:
The lion's share of their tone recipes is the AMP! Any guitar with any strings is going to sound fat when played through an overdriven tube amp.
A steel player who wants to sound crystal-clean through a 300-watt solid-state amp has different considerations.
(Just a personal aside about McLaughlin with Mahavishnu: fantastic compositions, fantastic playing, but, IMO, for the most part, his tone sucked!)
JMO, but I'd bet most "clean country pickers" also use a .009 to .042 guitar set. Nothing to do with "overdriven tube amps" vs "clean solid state". If you think "fat" strings are needed for good tone then you obviously LIKE the tone of "fat" strings. That doesn't mean they are necessary for "good" tone.....
Dennis
BTW I'd say FRESH strings are a key to "good" tone. I've been hard up at times and boiled my strings to "freshen up" their tone....It seems to help for a short time
"Bucks Owin"
- Anders Brundell
- Posts: 636
- Joined: 2 Nov 1999 1:01 am
- Location: Falun, Sweden
- Contact:
008
Is there any signal/sustain at all in a 008?
-
- Posts: 3942
- Joined: 23 Dec 2005 1:01 am
- Location: Maryland, USA
Dennis Schell wrote:
?????
My point was, when you play through an overdriven amp, any differences there might be between lighter and heavier strings are largely lost, as the effect of the amp clipping has exponentially more influence on the sound produced. It might, however, make a difference when playing "clean".
Nothing to do with "overdriven tube amps" vs "clean solid state".
?????
My point was, when you play through an overdriven amp, any differences there might be between lighter and heavier strings are largely lost, as the effect of the amp clipping has exponentially more influence on the sound produced. It might, however, make a difference when playing "clean".