low-watt amps

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Peter Cummins
Posts: 54
Joined: 2 Jan 2003 1:01 am
Location: Bonny Hills, NSW, Australia

Post by Peter Cummins »

Howdy Drew,
I use a Fender Deluxe Reverb RI, a great little amp and at 22watts, its really a loud amp for the power
Great clean sound and starts to overdrive at around 3.5 - 4.
Usually dont wind her past 4. Thats plenty loud on stage, then the PA does the rest.IMHO a good combo with Tele & Stringmaster.
Pete
User avatar
Drew Howard
Posts: 3910
Joined: 4 Aug 1998 11:00 pm
Location: 48854
Contact:

YES!

Post by Drew Howard »

Peter,

I'm using a friend's ten-year-old DRRI and want him to sell it to me, it is the perfect amp for my Stringmaster as well!! I tried out a new DRRI and it was pretty clean even when cranked. I need that earlier break-up. Perhaps it's the speaker inside. The guitarist in the band has a DRRI as well. He said changing the speaker cable in those amps makes a huge difference in sound.

cheers,
Drew
User avatar
Brian LeBlanc
Posts: 418
Joined: 5 May 2005 12:01 am
Location: Falls Church, Virginia, USA

Speaker Cable?

Post by Brian LeBlanc »

Changing speaker cable makes a big dif in sound?

Never heard that...
'Frenchy' LeBlanc...
ShoBud & Twins
User avatar
Loni Specter
Posts: 922
Joined: 26 Jun 2001 12:01 am
Location: West Hills, CA, USA
Contact:

Re: Speaker Cable?

Post by Loni Specter »

Brian LeBlanc wrote:Changing speaker cable makes a big dif in sound?

Never heard that...
Changing the player makes an even bigger difference :wink:

Actually high quality, low capacitance cables can improve signal and clarify tone.
User avatar
Dennis Schell
Posts: 307
Joined: 30 Jan 2007 3:41 pm
Location: Shingletown, Shasta county, Kalifornia

Re: Cheap Vibro Champ?

Post by Dennis Schell »

Brian LeBlanc wrote:... I just paid $300 !

...for a 71'
Gee, I would've sold you mine cheaper than that! Have you checked in the local pawnshops? Usually, there are some good bargains on equipment and guitars that sit around and don't sell for awhile....

Dennis

Image
"Bucks Owin"
User avatar
Brian LeBlanc
Posts: 418
Joined: 5 May 2005 12:01 am
Location: Falls Church, Virginia, USA

Pawnshops...& Speaker Cables

Post by Brian LeBlanc »

Nothing pre 1980 with Fender on it never even hits the Pawns around here!

Ebays seem to be over $3...

(also this guy delivered to my gig)

...
on "Speaker Cable" for a Deluxe Reverb...

What cable we talken about?
'Frenchy' LeBlanc...
ShoBud & Twins
Gary Lynch
Posts: 864
Joined: 15 Nov 2006 1:01 am
Location: Creston, California, USA

Post by Gary Lynch »

$300 for a 70's Fender Vibro Champ is a good price if it works well. You can play these for years and sell it for what you paid or maybe even more. They are great for all types of music considering thier size. It's a classic and the Tremolo is pretty cool. I have three of them besides my other styles and brands of amps.
User avatar
Alan Kirk
Posts: 826
Joined: 15 Mar 2002 1:01 am
Location: Paso Robles, CA, USA

Post by Alan Kirk »

I had a 5-watt Gibson GA5 Les Paul Junior amp (newer model). Sucker hummed too much. Side-by-side with other Class A amps, the Gibson was too noisy. Sent it back to Gibson. Lousy customer service. Techs with attitude. They sent it back to me, not fixed, with the power tube flopping around in the box. I faxed the company CEO and asked him why his customer service sucked. Gibson sent prepaid shipping label, replaced the amp with a newer model. Still hummed. I dumped it. Gibson sucks, in more ways than one.
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

The Epiphone 5 watt head that I have is sooooo quiet you don't even know it's on.
User avatar
Randy Cordle
Posts: 134
Joined: 8 Jun 2006 12:01 am
Location: Illinois, USA
Contact:

Post by Randy Cordle »

I've got a few small tube amps and bought the Epi valve jr. head from Musician's Friend. I was going to team it up with a custom tweed cabinet with a Weber alnico 12" that I purchased for this project, but it was dead on arrival. Sent the first one back and its replacement was dead also. MF was very nice to deal with, but I just got a refund and decided that someone doesn't want me to have an Epi valve jr. head. I've been working with sound equipment and electronics for 40 years, so I know it wasn't me.
I'm thinking of getting the brand new Peavey Royal 8 five watt tube amp and putting it in my new cabinet instead. It's $75 more, but I can ebay the cabinet and speaker and get some of that back. I've always had pretty good luck with the Peavey stuff.
Bill Creller
Posts: 3740
Joined: 29 Oct 2002 1:01 am
Location: Saginaw, Michigan, USA (deceased)

Post by Bill Creller »

I'm a tube guy, but I have a Microcube!!
This winter I built a clone/Fender Tweed Deluxe, a clone/Fender Princeton Reverb, and three amps based on a Valco design with different tubes and caps etc in each one.
To me, the Valco types have the tone I want. The Tweed Deluxe isn't what I would go out and buy, although Fender is just coming out with a re-issue of it. I wonder what that one is gonna cost!! :roll:

All the above mentioned are 6V6 type push-pull AB types. I haven't built a single-end class A type (yet) :D
John Bushouse
Posts: 704
Joined: 6 Dec 2003 1:01 am

Post by John Bushouse »

Alan Kirk wrote:I had a 5-watt Gibson GA5 Les Paul Junior amp (newer model). Sucker hummed too much. Side-by-side with other Class A amps, the Gibson was too noisy. Sent it back to Gibson. Lousy customer service. Techs with attitude. They sent it back to me, not fixed, with the power tube flopping around in the box. I faxed the company CEO and asked him why his customer service sucked. Gibson sent prepaid shipping label, replaced the amp with a newer model. Still hummed. I dumped it. Gibson sucks, in more ways than one.
Hmm... I think should check mine out.
Bill Creller
Posts: 3740
Joined: 29 Oct 2002 1:01 am
Location: Saginaw, Michigan, USA (deceased)

Post by Bill Creller »

I've never been a big fan of Gibson stuff, but I do have an old GA8T amp. I tried to sell it once, but no takers. I finally got into it and replaced a bunch of coupling caps in the pre-amp section to bring out more bass. That did the trick big-time. Now I like the way it sounds and I'm gonna keep it!! :D

It has zero hum, hard to tell it's on, but it was always a quiet amp.
Lots of power, EL84s in push-pull.
User avatar
Randy Cordle
Posts: 134
Joined: 8 Jun 2006 12:01 am
Location: Illinois, USA
Contact:

Post by Randy Cordle »

I did what I said I was going to do and picked up Peavey's new entry in the 5 watt club. It was $100 more than a Epi head, but worth it. Thought I might as well add a quick review if anyone is interested. For the record, I love low watt tube amps when pushed a little, but also dislike dealing with older (read vintage)tube amp issues. I'm still waiting for someone to do a 1 watt amp with the gain, tone, and master volume controls. Five watts is still seriously loud. You can gig with 5 tube watts in smaller venues, and larger ones will mic your stage monitor amp or feed you DI to the board anyway, so why haul more amp than you need to get the tone you want?
Here's the lowdown. Peavey Valve King Royal 8, 5 watts, class A, 12AX7 & EL84 tubes, gain , tone, master volume controls, low and high gain inputs, headphone output (disconnects speaker for late nite playing), jeweled pilot light and REAL toggle switch. All in all a great amp so far. It has a lot of versitility straight from the box, but I plan on putting it in a custom tweed cabinet with a Weber 12" driver. I do like an amp that pushes a little more air, and a 12" will do it. I do like the ability to overdrive the amp at low volume and the tone control is also quite nice to have. I've got a fair amount of Peavey equipment already, and for good reason. Most of it works fine and lasts a long time. What more can you ask for if you like the sound? This one is a keeper.
User avatar
Clete Ritta
Posts: 2005
Joined: 5 Jun 2009 6:58 pm
Location: San Antonio, Texas

Post by Clete Ritta »

Drew Howard wrote:I would love to find something that's older and not Fender, like a Silvertone, Gibson, etc.
Anyway, what do you use/recommend?
thanks,
Drew
How about those old Danelectro Cadets or other models?
The fact that these were made in Neptune, NJ in no way affects my biases and superstitions towards these relics.
Gary Lynch wrote:If you folks have not played your lap steel through a Honeytone by Danelectro, it's a trip. It sounds like a 1930's recording. Something Tom Waits would lay a mic close to and record it. Way funky but retro cool distortorama also..
The "Cadet" was my very first amp. Kinda collectible. Heres a "Corporal" (slightly bigger 10 watt version) on ebay currently:

Link to auction on eBay.

Clete
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

I guess at 15 watts you would consider it to be low wattage so yesterday I ordered a used Fender Blues Junior from MF.
They had a special one day "Columbus Day" special and I got an extra 15% off the amp.
If I don't like it, I can return it within 45 days.
Sure beats going e-bay. :D
User avatar
Gerald Ross
Posts: 3205
Joined: 4 Aug 1998 11:00 pm
Location: Ann Arbor, Michigan, USA
Contact:

Post by Gerald Ross »

Drew,

I have a 10 year old DRRI in M-I-N-T condition (with protective cover!). It's for sale. Let's talk. You can come down to A2 and try it out. It'll be fun.

GBR
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'

A UkeTone Recording Artist
Image

CEO, CIO, CFO - UkeTone Records
Gerald's Hawaiian Steel Guitar/Ukulele Website
Bill Creller
Posts: 3740
Joined: 29 Oct 2002 1:01 am
Location: Saginaw, Michigan, USA (deceased)

Post by Bill Creller »

My Fenders haven't been turned on for over a year. I don't like their "scooped mid" sound. The Valco/Supro/National amps don't seem to do that, and are my favorites for tone.
I had a new Fender Acoustasonic Junior for a while. Solid state. Didn't like that either, and loaned/gave it to my niece, and told her not to ever bring it back.
User avatar
Rocky Hill
Posts: 107
Joined: 6 Jul 2007 3:46 pm
Location: Prairie Village,Kansas, USA

Post by Rocky Hill »

I have used my Gibson Scout GA-17RVT for 42 years! Modern speaker, new caps, it rocks!

You can find them once in a while, and generally, they are not to expensive. It's the one behind me in my avatar.


Rocky
User avatar
George Rozak
Posts: 591
Joined: 26 Feb 2000 1:01 am
Location: Braidwood, Illinois USA

Post by George Rozak »

I'm using a Silvertone 1481 that I bought from Ken Fox here on the forum. Absolute best tone I've ever gotten on a lap steel. I usually don't even use any reverb with it. They show up quite often on eBay & are still pretty reasonably priced.
Sho-Bud: Professional & Fingertip
User avatar
George Rozak
Posts: 591
Joined: 26 Feb 2000 1:01 am
Location: Braidwood, Illinois USA

Post by George Rozak »

Just noticed that there's a 1481 in the for sale section here at a really good price. You might want grab it before I get too tempted again :)
Sho-Bud: Professional & Fingertip
User avatar
Veli-Pekka Haanmäki
Posts: 68
Joined: 26 Jan 2009 1:02 pm
Location: Finland

Post by Veli-Pekka Haanmäki »

I play my lap steel through older model BadCat MiniCat,very nice and warm little amp.Here is a link to the new model: http://www.badcatamps.com/badcat_amps.html
Chris Scruggs
Posts: 807
Joined: 20 Jan 2003 1:01 am
Location: Nashville, Tennessee, USA

Post by Chris Scruggs »

I would recommend the Deluxe Reverb. The extra 7 watts it has over the Blues Jr. Makes it an amp that can keep up with a drummer but still is ideal for low volume perforances. Plus, it has Tremelo which is nice for guitar. Also it is a two channel amp so you can run your Tele and Stringmaster simultaniously without the need to unplug and replug you guitars inbetween songs or solos.

I use a Deluxe Reverb as my main amp and have played it in living rooms with acoustic accompaniment and small clubs as well as in large theaters, auditoriums wand outdoor ampetheaters with loud drums and electric bands. It's just the right amp for just about any application.

CS
User avatar
Mark Roeder
Posts: 895
Joined: 25 Sep 2007 11:22 am
Location: Milwaukee, Wisconsin, USA

Post by Mark Roeder »

My 2 cents:

I like the Deluxe, I also use a Champ Jr. with an AB box for multi instruments into it. Its the simple one tone knob setup.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
User avatar
Marty Broussard
Posts: 2378
Joined: 18 Oct 2002 12:01 am
Location: Broussard, Louisiana, USA

Post by Marty Broussard »

I know this thread is old but I want to share some information that might help others. In my quest for a low watt/portable tube amp I found a device called the Rock Block. You can google it and go to the website. It looks very interesting, flexible, and guaranteed portable!! It can be used as an amp or a pedal. You can see it on YouTube also.
Post Reply