New Member

Hank Goddard · Post by **Hank Goddard** » 9 Nov 2006 3:32 pm

Hello
I have enjoyed the forum for awhile
but this is the first time to post . I would like to say I have learned a lot about the
Pedal steel just reading the discussions .
I am not a player (yet) but hope to learn
a bit more before I pass to te other side
I have a ShoBud proIII 8+4. I need to replace the fretboards. Anyone know where I could get them. I live in West Virginia
near Wheeling. Thanks
Hank

Charlie St Denis · Post by **Charlie St Denis** » 9 Nov 2006 4:28 pm

Hey Hank-Welcome to the family. I'm a new
member myself and I can say I visit here 10
times a day. Really I need a hobby. There
is lots to learn as these people have tons
of knowledge and they are willin to share.
Hopefully check the site below out for
steel guitar needs and Bobbe will set you
up. www.steelguitar.net
Enjoy -Charlie

Hank Goddard · Post by **Hank Goddard** » 9 Nov 2006 5:22 pm

Hi Charlie
nice to meet you and thanks for the tip
hope to talk to you again soon
have a good day
Hank

Al Marcus · Post by **Al Marcus** » 10 Nov 2006 6:32 am

Hank-Welcome to the Steel Guitar Forum....al

------------------
My Website..... www.cmedic.net/~almarcus/

Bill Mayville · Post by **Bill Mayville** » 10 Nov 2006 7:17 am

Hank
Big wecolme from Las Vegas Nevada!!!

Mike Shefrin · Post by **Mike Shefrin** » 10 Nov 2006 7:21 am

Hi Hank, and welcome to the forum. LOTS of steel stuff, and lots of great folks too.
Enjoy!

Pat Carlson · Post by **Pat Carlson** » 10 Nov 2006 8:58 am

Welcome Hank! I picked up this very addictive hobby 4 years ago.

Just have to make (That Sound)
Good Luck to you in your Steel Career

------------------
The Lone Prairie Steeler Pat

CrowBear Schmitt · Post by **CrowBear Schmitt** » 10 Nov 2006 9:16 am

Welcome to this Great Forum Hank

you jes' can't go wrong w: all the good folks round here

George Redmon · Post by **George Redmon** » 10 Nov 2006 10:52 am

Welcome Hank....

Hank Goddard · Post by **Hank Goddard** » 10 Nov 2006 12:59 pm

MANY THANKS to all for the warm wlcome
I look forward to making new friends, and
maybe finding some old ones, and learning
more about pedal steel. I played lead guitar
for more years than I like to remember,and
now retired. So I am going to give it a go.

Thanks again for the kind words
and have a great Day
Hank

Charles Davidson · Post by **Charles Davidson** » 12 Nov 2006 11:09 am

Hank.welcome from Alabama Bama Charlie,By the way Great name,a lot of my hero's were Hank.Williams,Thompson.Snow,Penny,Locklin.etc.etc.

Larry W. Jones · Post by **Larry W. Jones** » 12 Nov 2006 4:37 pm

Howdy Hank. welcome.

------------------

Kingwood Kowboy

Phillip Lee Thompson · Post by **Phillip Lee Thompson** » 13 Nov 2006 10:37 am

Hank -- by all means,Welcome to the Forum Family !! You will be very glad you joined.
And I agree,the name HANK is very well cherished here for many great reasons.

From Arizona pickers, Phillip.

Ricky Thibodeaux · Post by **Ricky Thibodeaux** » 13 Nov 2006 5:34 pm

Welcome Hank. You will find lots of help here if that's what your looking for. If your not here for help you will surely find lots of friends. Welcome aboard my friend.

------------------

James Marlowe · Post by **James Marlowe** » 13 Nov 2006 5:46 pm

Hi Hank!
Welcome to the greatest forum in the world. Loads of great information floating around this site. Lots of great people too. I've aquired some mighty good friends via. this forum. One of them lives across the river from you in Shadyside.
The best to you.
james

Jim Harper · Post by **Jim Harper** » 13 Nov 2006 6:41 pm

Hi Hank and a great big welcome to the Steel Guitar Forum from us folk,s down here in Okla.==Jim Harper

Wally Taylor · Post by **Wally Taylor** » 13 Nov 2006 6:47 pm

Welcome Hank, as you already know, you're gonna like it here!!

Wally

Papa Joe Pollick · Post by **Papa Joe Pollick** » 13 Nov 2006 6:54 pm

Hey Buddy..Never met a Hank that I didn't like.Welcome aboard.PJ

t

Donny Dennis · Post by **Donny Dennis** » 13 Nov 2006 7:14 pm

Hank, welcome aboard. This is a great forum. I am a beginner on the pedal steel guitar, and have found everyone to be very helpful.

May God bless you.

Donny

Larry Strawn · Post by **Larry Strawn** » 13 Nov 2006 7:55 pm

Howdy Hank,,,Welcome aboard I'm sure you'll enjoy it here, an answer to every question you ask and answers to some you didn't ask!!

Welcome,

Larry

------------------
"Fessy" S/D 12, 8/6 Hilton Pedal, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"

Eric McEuen · Post by **Eric McEuen** » 13 Nov 2006 10:00 pm

Welcome, Hank. I'm also a new member, but I've found this forum an incredible resource. Good luck with your Sho-Bud.

Nic du Toit · Post by **Nic du Toit** » 14 Nov 2006 3:20 am

Hi there Hank,
With a name that that you must surely be a country picker !

Welcome to the wierd world of steel players. You have another fine player and fellow forumite living near to you. Maybe he'll pick up on this thread.
This is the place to come to when you are in need of assistance with the steel.
Keep us posted on how you're doing.
Regards,

------------------
<img align=left src="http://home.telkomsa.net/peterden/al%20saut/images/nightmarefront85.jpg" border="0"><img align=left src="http://home.telkomsa.net/peterden/al%20saut/images/smokinfront85.jpg" border="0"><img align=left src="http://home.telkomsa.net/peterden/al%20saut/images/heavenfront85.jpg" border="0"><a href="http://home.telkomsa.net/peterden/al%20saut/lighthouse.htm" target="_blank"><img align=left src="http://home.telkomsa.net/peterden/al%20saut/images/lighthouse85.jpg" border="0">Nic du Toit
1970 P/P Emmons D10 Fatback 8x5
Peavey Session 500 unmodfied
Click on the images to go to the CD's
Click here for Nic's other projects
<A class=db href="mailto:alsaut@absamail.co.za?subject=Forum Reply">Click here to E-mail us.</A>

Herbie Meeks · Post by **Herbie Meeks** » 14 Nov 2006 9:20 am

Glad to meet you here, Hank.
with your experience picking Lead Guitar
You are already ahead of the game.
using the, E 9'th. tuning
all will fall in place.

Herbie

------------------

Charley Adair · Post by **Charley Adair** » 15 Nov 2006 7:56 am

Welcome, Hank. If you need it, you'll find it here.

Steve Kritz · Post by **Steve Kritz** » 15 Nov 2006 11:04 am

Hank, a big welcome to the Forum, the best part being, the friends you'll make, These guys are the best.......Steve