| Author |
Topic: older BMI |
Bill Yoder
From:
Orrville, Ohio, USA
|
Posted 26 Mar 2004 6:48 am |
|
| I have an older BMI ,single 10.I need to know where i can get some new changers,also,where does a guy get the white lithium grease ? |
|
|
|
Dale Bessant
From:
Sherbrooke, Quebec, Canada
|
Posted 29 Mar 2004 5:53 am
|
|
Bill,try to contact Don Fritsche, he is still making the BMI guitars and perhaps he could help, the last address I have is 763 Rodeo Arena Rd.,Rte.1 Box 105A, Scranton, Arkansas 72863 or e-mail at fritsche@cswnet.com.....as for the grease ,most high quality auto-stores should carry it in a tube..good luck hope it works...  ....I have an older S-10 BMI as well |
|
|
|
Bill Yoder
From:
Orrville, Ohio, USA
|
Posted 29 Mar 2004 1:52 pm
|
|
| DaleTHANKS FOR THE INFO ON THE BMI changers |
|
|
|
Terry Wood
From:
Lebanon, MO
|
Posted 31 Mar 2004 4:44 am
|
|
Yes, Don Fritsche's the man who has the parts and knows the BMI's best now.
GOD bless you!
Woody |
|
|
|
Charles Tilley
|
Posted 18 Jul 2004 3:36 am
|
|
This is good information for me also. I just purchased a BMI S-10 from the forum and had a few questions. This is a very good design guitar but not as smooth as a MSA or Carter.The pedal action on mine seems to be stiff. I sent Don an E-mail for information on that and other questions.
I am hoping I like this guitar because EVERY part in a machined part and it has minimal cabinet drop.
If anyone has any further information on BMI, please post it here or send me an E-mail.
------------------
Charles Tilley ,
ETSGA Events Director
Bullard, Texas
1994 Carter D-10,1973 MSA D-10 Classic, RV3, Nashville 400 and Evans SE200
[This message was edited by Charles Tilley on 18 July 2004 at 04:37 AM.] |
|
|
|
Ken Lang
From:
Simi Valley, Ca
|
Posted 18 Jul 2004 5:53 pm
|
|
| White lithium grease. Should be available at any auto parts store or any parts store that sells ball bearings, ie Motion Industries. Check the yellow pages under ball bearings. |
|
|
|
