Tapes to cds - what's available ?

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Tapes to cds - what's available ?

Post by Bill Myrick »

I have numerous sermons of approximately 45 minutes each on cassette tapes that I would like to copy to cds that will play in our car cd player. I would appreciate helpful info - can I put more than one on a rewritable cd blank ? Is it possible to do high speed, like high speed tape dubbing ? What machines are available ? etc. Thanks -- Bill Myrick.<font size="1" color="#8e236b"><p align="center">[This message was edited by Bill Myrick on 04 June 2006 at 07:59 AM.]</p></FONT>
James Sission
Posts: 2061
Joined: 4 Apr 2005 12:01 am
Location: Sugar Land,Texas USA

Post by James Sission »

I put my cassettes into the computer with a free software called Audacity. Then I downloaded a free MP3 ripper and and ripped them to MP3 and then burned them to CD. There is probably a faster way, but this way was free....James
User avatar
Jim Sliff
Posts: 7059
Joined: 22 Jun 2005 12:01 am
Location: Lawndale California, USA

Post by Jim Sliff »

I'm pretty sure WInows XP...or maybe it's the "Plus" package...has a sound transfer program. I'm not at the Windows machine right now, but I've moved dozens of LP's and tapes to CD that way.

For tape you just rn an output from a cassette player to the soundcard input; for LP's you need an RIAA preamp to boost the signal from yor turntable's cartridge output - Radio Shack sells a cheap, small one (3"x3") for 20 bucks or so that works perfectly.
John Lockney
Posts: 357
Joined: 13 Dec 2004 1:01 am
Location: New Market, Maryland, USA

Post by John Lockney »

They also make a cassette-player that installs in your computer for this type of thing:
http://www.plusdeck.co.uk/aspbite/categories/index.asp?tim=19:28:21

The "mic" input on your sound-card might be OK for spoken-word but, you could find that you need a better sound-card to transfer music with acceptable quality. It might depend on whether you want to make MP3 or full CD-quality.


<font size="1" color="#8e236b"><p align="center">[This message was edited by John Lockney on 04 June 2006 at 11:28 AM.]</p></FONT>
User avatar
Al Marcus
Posts: 9440
Joined: 12 May 1999 12:01 am
Location: Cedar Springs,MI USA (deceased)
Contact:

Post by Al Marcus »

I run a tape to a line in on the computer. Works good. But I am looking for a dual Cassette recorder/ player with a mic input, to do some songs...al

------------------
My Website..... www.cmedic.net/~almarcus/


User avatar
richard burton
Posts: 3846
Joined: 23 Jan 2001 1:01 am
Location: Britain

Post by richard burton »

Al,
Why not tape direct to the computer, using the Audacity recorder?

Further to what Jim says about recording off vinyl, I've had some success using my old Portastudio 4 track cassette recorder to boost the signal.

(No I don't use it to put the music onto tape!!)

I just plug the left and right outputs from the record player to the inputs on the Portastudio, and the outputs from the Portastudio to the computer input.

It also allows me to boost the signal, shape the tone slightly, and maintain the stereo tracks.
Dean Dobbins
Posts: 529
Joined: 8 Jan 2000 1:01 am
Location: Rome, Ilinois, U.S.A. * R.I.P.

Post by Dean Dobbins »

I have a Pioneer CD digital recorder, and dual casset deck with the recording deck having a pitch adjustment, pacthed through the auxillary inputs my stereo system.I can make CDs from anything in the system,(turntable, VCR audio, tuner, etc.). The only drawback is, sometimes there is not enough time between songs on the casset to allow the auto tracking mode to separate some tracks on the CD.

------------------
Dino
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Post by Bill Myrick »

Thanks for all the good info--but my computer is oriented in my office and not really as handy as it should be for using it for the above. Is there not some kind of "stand alone" machine available that will dub audio cassettes to cds ?? Thanks again.
Dennis Wallis
Posts: 1045
Joined: 1 Jun 2004 12:01 am
Location: Arkansas

Post by Dennis Wallis »

Here's what I have......an RCA CDRW120 CD recorder. I have my dual cassette deck (which is also a recorder) hooked to it. This way I can put tapes onto CD or CD onto tape. You have to use MUSIC CD's but that's no big deal. After you make a CD you can RIP the files off onto your computer and make copies if you want to. It works great. Also if there's not enough time bewteen tracks on the tape it has a manual mode so you can make the individual tracks. I doubt if they make this model anymore but you can still find them. Worth the money. You can put almost ANY signal onto CD with this machine. EVEN LIVE !!
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Post by Bill Myrick »

Thanks Dennis---I'll check into that . I also have heard there is some kind of a little portable unit that will plug into the car somehow so the CD player can play a cassette tape, but I may have it backwards.
User avatar
John Daugherty
Posts: 2188
Joined: 13 May 2004 12:01 am
Location: Rolla, Missouri, USA
Contact:

Post by John Daugherty »

Bill, You could probably find a used computer for less than $100 that would run the recording program you need to transfer tapes. You can buy new CD burners for the computer for $30.

------------------
www.home.earthlink.net/~johnd37


Ray Minich
Posts: 6429
Joined: 22 Jul 2003 12:01 am
Location: Bradford, Pa. Frozen Tundra

Post by Ray Minich »

I have a Phillips CDR-870 standalone unit. Combination CD player recorder. It "DEMANDS" you use "music" cd's. Works OK off the mixer output, but, tape hiss will keep it from advancing to the next track number.
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Post by Bill Myrick »

Well if I understand correctly, a cd will barely hold a 45 minute audio sermon anyway, right ? I'm dumb about this stuff for sure !! And of coarse, our car cd player needs to play it also.
Pee Wee Rogers
Posts: 65
Joined: 24 Aug 2003 12:01 am
Location: Lebanon, Tennessee, USA * R.I.P.

Post by Pee Wee Rogers »

I use a Sony RCD-W500C CD recorder.

The way I connect it to the Stereo is through the earphone jack. . . so what ever is on the speakers goes on the CD.

It requires that you use Music-R CD's and each one holds 80 minutes.

Almost enough for two sermons or one sermon with comments.

I have recorded from the Radio, Turntable,
CD player and Tape player and the quality is great as you would expect from Sony.

I also have a VCR hooked up to my Stereo
because we do the Opry Tuesday, Friday and Saturday.I record the whole thing on VCR EP and then play it back in real time to CD.

The quality seems to me better in real time.

Hope this helps. . .Pee Wee Rogers
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Post by Bill Myrick »

Thanks to all for your info and help. Pee Wee I ordered the same unit you have today. I think it fits my situation the best and thanks so much !!! Bill.
User avatar
Ken Fox
Posts: 9620
Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA

Post by Ken Fox »

http://www.pcworld.com/howto/article/0,aid,117810,00.asp

Good article about ripping vinyl to CD. Also explains the RIAA preamp needed for a turntable. Most of the article would apply to tapes as well
Bill Myrick
Posts: 2567
Joined: 21 Feb 1999 1:01 am
Location: Pea Ridge, Ar. (deceased)
Contact:

Post by Bill Myrick »

Hey Ken--Good to hear from you !! Thanks for the upgrade on my profex II at Dallas and for locating my dobro programing next to my Hughey one that I use almost exclusively. It's sure a lot handier now !! Image
User avatar
Jim Sliff
Posts: 7059
Joined: 22 Jun 2005 12:01 am
Location: Lawndale California, USA

Post by Jim Sliff »

There were a few combination cassette/CDR machines made in the 90's. I borrowed one from a buddy to tranfer a few things, but his is long gone and we can't recall the maker...but for some reason I keep thinking it was under the Teac name.
Post Reply