The Steel Guitar Forum Store 

Post new topic So what was the problem with the Evans?
Reply to topic
Author Topic:  So what was the problem with the Evans?
Brint Hannay

 

From:
Maryland, USA
Post  Posted 27 Apr 2006 7:43 pm    
Reply with quote

Hey Gary Glisson: As an Evans owner myself who has some trouble with hum, I'd like to know what the problem was that you got figured out!
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 28 Apr 2006 2:40 am    
Reply with quote

I had low level hum problems with a new SE-200 (2004 model with the Delta Lite speaker) and I sent it back to the factory. The problem was the idle current for the power output transistors was too high. They readjusted the idle current and it took care of the low level hum.
View user's profile Send private message Send e-mail

Gary Glisson

 

From:
munford, tn 38058
Post  Posted 28 Apr 2006 3:55 am    
Reply with quote

hi Brint. i narrowed it down to my volume pedal and the wiring in my house. but pertty sure its my volume pedal. i have a goodrich 10 K pedal when i have one amp plug into the pedal dosen't matter which amp no hum but as soon as i plug the second amp in i get hum in both amps there is a little hiss when you run your gain above 5 but the hiss is not hearable on my amps if you are standing 5 feet away. i did reduce the hum a little by getting my house wiring digram and using a large extension cord pluging one of the amps in to a outlet wired seprate from the outlet that my other amp is pluged in i'am gonna buy me a hilton pedal in the next couple of weeks
do you have a FET 500?
thanks gary
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 28 Apr 2006 5:23 am    
Reply with quote

If you are getting hum with two amps plugged in, it's the standard "ground loop hum" problem. You can use a commercial "hum elminator" on one amp, but you can verify that by ungrounding one amp (one amp only).

It's not the volume pedal that's causing it.
View user's profile Send private message Send e-mail

Keith Hilton

 

From:
248 Laurel Road Ozark, Missouri 65721
Post  Posted 28 Apr 2006 8:56 am    
Reply with quote

I agree with Jack. Sounds like a classic case of ground loop. Make sure each amp has a ground on the power cord. Try to plug everything into one wall socket. Make sure the wall socket is grounded. There still could be noise.
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP