| Author |
Topic: 2 in 1 |
Bill Yoder
From:
Orrville, Ohio, USA
|
Posted 8 Aug 2005 12:24 pm |
|
| I,m currently playing my tele and my s10 both thru a nv400.I run the tele in the top jack,and the steel in the lower jack.it seems to work o.k.but am i doing any damage to the amp.does anyone else do this? |
|
|
|
Bill Yoder
From:
Orrville, Ohio, USA
|
Posted 8 Aug 2005 12:27 pm
|
|
| Forgot to mention,i,m using a profex11 on the steel,and a boss cs3,and a ibanez analog delay on the tele. |
|
|
|
ray qualls
From:
Baxter Springs, Kansas (deceased)
|
Posted 8 Aug 2005 1:05 pm
|
|
| Bill, you ain't gonna hurt that Nashville 400. Its made to play and your set-up is just fine. I've been doing it for years. Ray |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 8 Aug 2005 1:59 pm
|
|
| If you plug two instruments in to the Nashville 400 (and most other Peavey Amps) both inputs become low gain. Won't hurt anything. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 11 Aug 2005 10:48 am
|
|
| The input sensitivity is arranged in this manner so that the preamp is not overdriven. fyi. |
|
|
|
David Wren
From:
Placerville, California, USA
|
Posted 11 Aug 2005 11:47 am
|
|
I did that for years, and then got a $90 mixer, put guitar and steel in it, and then run the output through my VP (I found the PV volume pedal circuit seemed to cut my gain and take away a little presence)... now everything goes through my VP, (and any FX in line) and I have separate EQ/GAIN... works nice if you play guitar as bad as I do. (:>)>=[
------------------
Dave Wren
'95Carter S12-E9/B6,7X7; Session500; Hilton Pedal
www.ameechapman.com
|
|
|
|
