Your Nashville 400 settings

Drew Howard · Post by **Drew Howard** » 23 Mar 2005 9:38 am

factory mod

GAIN
Pre: 3-5 Bright switch on
Post: 9

EQ
Low: +12
Mid: -6
Shift: 500K
High: +6
Presence: +6

Reverb: 4-5

------------------

Drew Howard - website - Fessy D-10 8/8, Magnatone S-8, N400's, BOSS RV-3

[This message was edited by Drew Howard on 23 March 2005 at 02:50 PM.][This message was edited by Drew Howard on 23 March 2005 at 02:51 PM.]

Larry Strawn · Post by **Larry Strawn** » 23 Mar 2005 9:51 am

Drew,,
haven't had any dealings with a Nashville, how much will those settings vary to a Sessions 400??
Larry

------------------
Emmons S/D-10, 3/4, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"

Greg Vincent · Post by **Greg Vincent** » 23 Mar 2005 10:07 am

Hey Drew don't forget to mention whether the PRE-bright function is on or off.

Here's what I'm using right now:

(factory mod)

PRE: 3-5, bright on
POST: 7
LOW: +3
MID: -15 (full cut)
SHIFT: 800K
HIGH: 0
PRESENCE: 0
REVERB: 5

Neat thread. I'm interested to see more folks' settings. -GV[This message was edited by Greg Vincent on 23 March 2005 at 12:06 PM.]

Mark Ardito · Post by **Mark Ardito** » 23 Mar 2005 10:13 am

I have the "LeMay" mod done to my Nashville 400 and here are my settings.

PRE: 3 - BRIGHT ON
POST: 7-8
LOW: +6
MID: -3
SHIFT: 400
HI: +6
PRESENCE: +6

REVERB: 5

------------------
Sho~Bud Pro I, Fender D-8 (C6&E13) http://www.darkmagneto.com
http://www.arditotech.com

Burton Lee · Post by **Burton Lee** » 23 Mar 2005 10:43 am

Peavey mod.

Pre 3-6 bright off
Post 8
Low +3
Mid -12
Shift 800
High +4
Presence+3
Reverb 1-2
[This message was edited by Burton Lee on 23 March 2005 at 10:44 AM.]

autry andress · Post by **autry andress** » 23 Mar 2005 1:12 pm

Here is what I use with a Derby:
Pre 4 Post 4 Low +9 Mid -6 Shift 775 H+8 P+5
RV-7

Here is what I use with a Fessy. Pre 4
post 4 low+6 mid-3 Shift 600 H+6 pres+3 RV5

Lee Baucum · Post by **Lee Baucum** » 23 Mar 2005 1:27 pm

With my Mullen, I always set the shift at around 800. After I installed the LeMay kit, it seemed like 500 or 600 was a better shift point for that guitar.

Lee

Ricky Davis · Post by **Ricky Davis** » 23 Mar 2005 1:30 pm

When I absolutely have to plug into a Nashville 400..ha..
Post 9
Pre> what ever the gig calls for.

Low +9
Mid -9
Shift 800
Hight +5
Pres +5
Reverb in the 4 to 6 area; depending on the reaction of that particular Peavey amp.
These are pretty much the same for the Session 400 and LTD 400.
Ricky

Larry Strawn · Post by **Larry Strawn** » 23 Mar 2005 4:01 pm

Ricky,
Thanks for the info on the Sessions' settings, I'm pretty much right in that area. But all ways tryin to sound better..
Larry

------------------
Emmons S/D-10, 3/4, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"

Charlie Moore · Post by **Charlie Moore** » 23 Mar 2005 4:21 pm

With my p/p with no mod with tt 19500 on both neck's,
PRE-never over 5
POST 5
LOW + 12
MID -6
SHIFT 800
HI +3
PR +6
REV 4[This message was edited by Charlie Moore on 23 March 2005 at 04:22 PM.]

Jim Loessberg · Post by **Jim Loessberg** » 24 Mar 2005 1:23 am

Amp: Stock.
Bright Switch: On.
Pre Gain and Post Gain: Equal.
Bass: Wide open.
Mid: Off to just barely on, depending on room.
Shift: 3:00.
Treble: 10:00 -- 11:00, depending on room.
Presence: Wide open.

When I record at home I use slightly less treble since the mic I like tends to be fairly bright.

Best,

Jim

sonbone · Post by **sonbone** » 24 Mar 2005 2:21 am

No mods
Bright Off
Pre 6
Post 6
Low +9
Mid -3
Shift 800
High -3
Presence -3
Reverb off

Steve Alonzo Walker · Post by **Steve Alonzo Walker** » 24 Mar 2005 3:57 am

PRE: 4, bright off
POST: 12
LOW: +12
MID: 3
SHIFT: 0
HIGH: 3
PRESENCE: 15
REVERB: 4

Don Ricketson · Post by **Don Ricketson** » 24 Mar 2005 6:14 am

You guys are all TOO LOUD

------------------
Mullen D10-8/5
Sho-Bud S10-3/4
Evans Amps
"Making The Stars Shine"

Jerry Hayes · Post by **Jerry Hayes** » 24 Mar 2005 6:23 am

I use a BMI S-12 through mine with the following settings:

Pre gain.....4-5
Post Gain....6-7
Low..........10
Mid..........completely off!
high.........8
presence.....8
reverb.......0

I have the LeMay mod and in place of the reverb I use an old Ibanez 2 space analog delay unit coupled with a BBE Sonic Maximizer. Both effects patch through the back of the amp......JH in Va.

------------------
Livin' in the Past and Future with a 12 string Mooney Universal tuning.

Greg Vincent · Post by **Greg Vincent** » 24 Mar 2005 9:10 am

Man we're all over the MAP here!

Roger Edgington · Post by **Roger Edgington** » 24 Mar 2005 10:24 am

Does anyone run their volume pedal in/out of the pre eq patch?

Gerald Williamson · Post by **Gerald Williamson** » 24 Mar 2005 10:51 am

Roger, Always!

I use an old ShoBud pedal with a pot and you get very little tone loss through the full length of the pedal. Directly into the amp, the tone loss is major at lower levels of the pedal.

Jerry Hayes · Post by **Jerry Hayes** » 24 Mar 2005 11:33 am

I used to use the pre-eq patch for my Goodrich volume pedal all the time but when I got my Hilton they recommend that you don't do it with theirs....JH

------------------
Livin' in the Past and Future with a 12 string Mooney Universal tuning.

Jonathan Cullifer · Post by **Jonathan Cullifer** » 24 Mar 2005 1:26 pm

To better match a room's acoustics, I reset my amp just about each time I play. Usually it looks like this:

Pre: 3
Post: 7

Low: 9
Mid: 0 to -3
Shift: Top dead center
High: -3 to 3
Presence: -3 to 3
Reverb: 6-7 without delay, around 4 with the delay