emmons volume pedal?

Terry Sneed · From: Arkansas,

Is there an adjustment on an emmons pedal that will keep it in place when you take your foot off it? mine won't stay put
Terry

------------------
Zum D10 /8x5 / session 400
steelin for my Lord

Vann Ray Cranford · From: Kinston, N.C. 28501-1571

Hey Terry,
You can adjust the pedal tension on the Emmons volume pedal by tightening or loosening the hex head screws that are found on each side of the pedal. These screws can be seen if you look into the hole on each side of the polished aluminum part of the pedal. What I like to do with my Emmons pedal is to remove the two screws and apply some blue Loctite to the threads, then replace the screws and adjust the tension on the screws before the Loctite dries. This should solve your problem. Take care! Vann

Terry Sneed · From: Arkansas,

Thanks Vann. I was beginning to think I wadn't goin to get any help.

thanks a lot.
Terry

------------------
Zum D10 /8x5 / session 500rd
steelin for my Lord

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: