| Author |
Topic: Editing Lexicon MPX-100 Programs |
Mark Kelchen
From:
Cedar Rapids, Iowa USA
|
Posted 2 Mar 2004 3:16 pm |
|
| I am in need of assistance in editing programs on a Lexicon MPX-100. For example, in the Delay/Reverb mode, how do you stop multiple repeats? I would like to wind up with perhaps 1 1/2 to 2 decending repeats. Currently, I am getting 3 1/2 repeats picking normally and several more when picking harder. Any suggestions on how to lessen the amount of repeats???? |
|
|
|
Tony Dingus
From:
Kingsport, Tennessee, USA
|
Posted 2 Mar 2004 7:45 pm
|
|
Mark, I use variation 11 with the effects level/balance at 3 or 4 o'clock and the adjust at 3 o'clock. The delay is not very loud with this setting but that's as close as I can get dealing with the same problem you're having. I hope this might help you.
Tony |
|
|
|
Mark Kelchen
From:
Cedar Rapids, Iowa USA
|
Posted 5 Mar 2004 3:40 pm
|
|
| Good effect there but still too many repeats, especially when picking too hard. Still looking for a solution. I know it can be done, but how??? |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 10 Mar 2004 3:28 pm
|
|
I've never been able to dial in a setting for reverb and only one repeat. I finally bought a cheap digital delay and I use it for delay only. I use the Lex for reverb and reverb/chorus (easy on the chorus, though) combinations.
------------------
Lee, from South Texas
Down On The Rio Grande
|
|
|
|
Andy Schick
From:
Kingston, Ontario, Canada
|
Posted 11 Mar 2004 11:14 am
|
|
| I use 2 lex 100's. rev and del |
|
|
|
Mark Kelchen
From:
Cedar Rapids, Iowa USA
|
Posted 11 Mar 2004 1:43 pm
|
|
| Are you using them both in the single effect mode as one Lex on reverb and the other on delay? |
|
|
|
Mark Kelchen
From:
Cedar Rapids, Iowa USA
|
Posted 11 Mar 2004 1:49 pm
|
|
I contacted Lexicon's tech support dept. They said in the dual mode, it is limited to the preset algorythms, and cannot be changed. They suggested setting the "Adjust" knob to the 12 o'clock position to soften the delays. In that position, you never really hear the additional repeats in the live band mode, but is really enhances your sustain. Here is the link to Lex's tech support dept. It's quite interesting.
http://www.lexiconpro.com/ |
|
|
|
