BOTH necks on.
Moderator: Shoshanah Marohn
-
- Posts: 7252
- Joined: 6 Nov 1998 1:01 am
- Location: Atlanta Ga. USA
BOTH necks on.
On a double neck PSG, what is the correct procedure to be able to have BOTH necks on at the same time and get the best possible volume and tone from the guitar.
In the center position at the pickup selector switch with both necks on, I am getting a thinner sound and less output. I do not believe the pickups are out of phase. Would I be better off wiring the guitar with two separate outputs and run into a 2 channel pre.
In the center position at the pickup selector switch with both necks on, I am getting a thinner sound and less output. I do not believe the pickups are out of phase. Would I be better off wiring the guitar with two separate outputs and run into a 2 channel pre.
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
-
- Posts: 7252
- Joined: 6 Nov 1998 1:01 am
- Location: Atlanta Ga. USA
- richard burton
- Posts: 3846
- Joined: 23 Jan 2001 1:01 am
- Location: Britain
- Darvin Willhoite
- Posts: 5715
- Joined: 4 Aug 1998 11:00 pm
- Location: Roxton, Tx. USA
Doug Jernigan plays a song using both necks at the same time. That would be a little unhandy if you couldn't have them both on at the same time.
------------------
Darvin Willhoite
Riva Ridge Recording
------------------
Darvin Willhoite
Riva Ridge Recording
-
- Posts: 8173
- Joined: 3 Jan 2002 1:01 am
- Location: Buffalo, N.Y.
- Contact:
- Bobby Lee
- Site Admin
- Posts: 14863
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, California, USA
- Contact:
I run my Stringmaster with both necks on when I perform live. The additional impedence load balances the tone between the two necks better.
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (E6add9), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (E6add9), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
-
- Posts: 6429
- Joined: 22 Jul 2003 12:01 am
- Location: Bradford, Pa. Frozen Tundra
Has anyone ever taken an S-10 and outfitted it for C6th alone? I'm gonna have 3 S-10 axes total in the next couple of weeks and instead of having all at E9th I might wanna rig one for C6th.
It would make playing Steel Guitar Rag on both necks a little difficult but theatrical anyway.
Any suggestions?
It would make playing Steel Guitar Rag on both necks a little difficult but theatrical anyway.
Any suggestions?
-
- Posts: 1355
- Joined: 4 Aug 1998 11:00 pm
- Location: Saskatchewan Canada
Ray, if the S-10 is a standard 3/4 you have 7 changes and that would allow all the changes on a "standard" C-6, although in "un-standard" locations.
I did that on the old S-10 I had when I was debating whether or not to get a D-10. I had never had a pedal 10-string steel in the past, so I set up the S-10 that way (can't remember the exact copedant) for about 4 months to see if I enjoyed using the C6 tuning. I did, and decided on a D-10.
Actually, with careful selection of placement, setting it up on that many knees can reduce the number of "2-feet" combos that sometimes are needed on a 5/1 or 5/2 C6 setup
I did that on the old S-10 I had when I was debating whether or not to get a D-10. I had never had a pedal 10-string steel in the past, so I set up the S-10 that way (can't remember the exact copedant) for about 4 months to see if I enjoyed using the C6 tuning. I did, and decided on a D-10.
Actually, with careful selection of placement, setting it up on that many knees can reduce the number of "2-feet" combos that sometimes are needed on a 5/1 or 5/2 C6 setup
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
I too have experienced this. With both necks on it thins my tone down slightly, and can clean the E9th up a bit. I leave both necks on for a few songs, I.E. "Blue Bayou", played in C. With a three piece group (-Bass) I can do the intro bass on the low C and chimes (C6th), do the solo ala Dan Dugmore (E9th), and add some nice C6th Island slides at the end.
Lefty,
Dekley D-10
Sho Bud LDG
Johnson J-Station<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Lefty on 02 February 2004 at 04:28 PM.]</p></FONT>
Lefty,
Dekley D-10
Sho Bud LDG
Johnson J-Station<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Lefty on 02 February 2004 at 04:28 PM.]</p></FONT>