The Thomas Edison of Rickenbacher
Moderator: Brad Bechtel
The Thomas Edison of Rickenbacher
I try to keep my forum posts positive but this one has me really ticked off! It's come to my attention that some people have intimated that Rick Aiello's posts offering info about pickups, etc. are disingenuous because he's really just trying to sell pickups. I'll chalk this up to ignorance but a few stronger words come to mind. Get real!
The record exisits in the forum archives. Rick has generously shared his knowledge for several years. Who else has done the scientific anlysis of horseshoe pickups, waveforms, harmonics, vibrato, and on and on that Rick has? Frankly, who else has cared enough to do so? And get this - did he put it all in a self published book and charge you for it? No, he posted it here - for free. Public domain. As for selling pickups, he deserves to sell all he can. They are building a reputation solely on their own merits. Really, how many people involved in the steel guitar industry make much of a profit? Not many. Not Rick. So think again before you criticize this valued member of our community. To quote Stan Lee: 'Nuff said.
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Andy Volk on 28 May 2004 at 06:19 AM.]</p></FONT>
The record exisits in the forum archives. Rick has generously shared his knowledge for several years. Who else has done the scientific anlysis of horseshoe pickups, waveforms, harmonics, vibrato, and on and on that Rick has? Frankly, who else has cared enough to do so? And get this - did he put it all in a self published book and charge you for it? No, he posted it here - for free. Public domain. As for selling pickups, he deserves to sell all he can. They are building a reputation solely on their own merits. Really, how many people involved in the steel guitar industry make much of a profit? Not many. Not Rick. So think again before you criticize this valued member of our community. To quote Stan Lee: 'Nuff said.
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Andy Volk on 28 May 2004 at 06:19 AM.]</p></FONT>
- Russ Young
- Posts: 1053
- Joined: 21 May 2002 12:01 am
- Location: Seattle, Washington, USA
I would remind everyone that Rick has offered to re-gauss pickup magnets for anyone who will make a donation to the Steel Guitar Forum. In my case, he took a substantial amount of time polishing my "horseshoes," and was prepared to re-plate them if that didn't work -- at no charge.
If Rick's motivation is selling more pickups, he sure could use some advice about how to do business.
Thanks for all your contributions, Rick. Even if I can't understand 50% of what you're talking about!
If Rick's motivation is selling more pickups, he sure could use some advice about how to do business.
Thanks for all your contributions, Rick. Even if I can't understand 50% of what you're talking about!
It's hard to imagine any kind inference to this sort of thing.
Rick has devoted himself, his time, energy, enthusiasm, and valuable knowledge to the instrument that we all love. It sure would be a major set back if we didn't have everything that he's done for us.
"Mag'in for b0b"......disingenous? GET REAL! nuff said
<font face="monospace" size="3"><pre>hey Andy, what does disingenous mean anyhow?</pre></font>
Rick has devoted himself, his time, energy, enthusiasm, and valuable knowledge to the instrument that we all love. It sure would be a major set back if we didn't have everything that he's done for us.
"Mag'in for b0b"......disingenous? GET REAL! nuff said
<font face="monospace" size="3"><pre>hey Andy, what does disingenous mean anyhow?</pre></font>
- Gerald Ross
- Posts: 3205
- Joined: 4 Aug 1998 11:00 pm
- Location: Ann Arbor, Michigan, USA
- Contact:
Rumor has it that Rick Aiello is financing his beachfront villa in Hawaii through the sale of horseshoe pickups. I also heard that McDonalds wants to include his pickups with their Happy Meals. Britney Spears was recently spotted leaving Rick Aiello's house in the wee hours of the morning ...
He's getting rich off of us! He's out for world domination!
Come on... give me a break. Some folks just don't realize how small of a group we are. Do you really think the world knows or cares about the steel guitar, let alone a Rickenbacker 1930's reissue Horseshoe Pickup with correct gauss readings?
Rick is an honest guy who has a true passion for the instrument and it's music. If he makes a few bucks (and I emphasize "few") selling his product, then more power to him. He is a great asset to our very tiny community.
------------------
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'
Gerald's Fingerstyle Guitar Website
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Gerald Ross on 28 May 2004 at 07:10 AM.]</p></FONT>
He's getting rich off of us! He's out for world domination!
Come on... give me a break. Some folks just don't realize how small of a group we are. Do you really think the world knows or cares about the steel guitar, let alone a Rickenbacker 1930's reissue Horseshoe Pickup with correct gauss readings?
Rick is an honest guy who has a true passion for the instrument and it's music. If he makes a few bucks (and I emphasize "few") selling his product, then more power to him. He is a great asset to our very tiny community.
------------------
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'
Gerald's Fingerstyle Guitar Website
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Gerald Ross on 28 May 2004 at 07:10 AM.]</p></FONT>
And she told me that she was going straight home! That's it....I'm done with her and I'm tossing her wonder bras out too!<SMALL> Britney Spears was recently spotted leaving Rick Aiello's house in the wee hours of the morning ... </SMALL>
<font face="monospace" size="3"><pre>talk about pick ups!</pre></font>
Well, I do have a "crossover"....
Anyhow, what Rick has accomplished, and key word is "accomplished" and still accomplishing, is in the same vein as those before him who created and pioneered the steels that we hold in such high regard. <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by HowardR on 28 May 2004 at 07:42 AM.]</p></FONT>
Anyhow, what Rick has accomplished, and key word is "accomplished" and still accomplishing, is in the same vein as those before him who created and pioneered the steels that we hold in such high regard. <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by HowardR on 28 May 2004 at 07:42 AM.]</p></FONT>
- Steinar Gregertsen
- Posts: 3234
- Joined: 18 Feb 2003 1:01 am
- Location: Arendal, Norway, R.I.P.
- Contact:
Usually I'm a very peaceful person, but reading something like this make me wanna confront whoever said that with my 197cm's and 110kg's!!
Steinar
------------------
www.gregertsen.com
Steinar
------------------
www.gregertsen.com
Although Andy's first post says it all IMO, here's my 2¢ worth: Rick is a good, up-front guy, and an amazing Ricky guru at that. He's been extremely generous to me with his time, answering my many recent newbie questions about Rickys and pups, and at no time whatsoever has there been any "angle" in our communications. Like Andy said above, I, too, try to keep my posts positive, but I have to say that anyone who thinks that Rick's many helpful posts are in any way disingenuous-- well, they need to re-think <u>that</u> one!
<font size=1>~~~~~ edited to add the quote ~~~~~
~~~~~ edited 2nd time to qet quote formatting correct ~~~~~</font>
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by John Pelz on 28 May 2004 at 07:53 AM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by John Pelz on 28 May 2004 at 07:55 AM.]</p></FONT>
You're lucky, Russ-- I can only understand about 25%-- and that's <u>with</u> my tin-foil helmet on!<SMALL>Thanks for all your contributions, Rick. Even if I can't understand 50% of what you're talking about!</SMALL>
<font size=1>~~~~~ edited to add the quote ~~~~~
~~~~~ edited 2nd time to qet quote formatting correct ~~~~~</font>
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by John Pelz on 28 May 2004 at 07:53 AM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by John Pelz on 28 May 2004 at 07:55 AM.]</p></FONT>
- Jeff Strouse
- Posts: 1628
- Joined: 20 Apr 2002 12:01 am
- Location: Jacksonville, Florida, USA
Rick is a great guy!! He's helped me out a bunch of times with guitars, music, electronic stuff, you name it. The guy's heart is good as gold, and so is his love for steel guitar. ANYONE making a derogatory statement about him would be making one out of ignorance. We are blessed to have his knowledge and insight here...he is a pillar of the forum and I'm proud to call him my friend.
- Russ Young
- Posts: 1053
- Joined: 21 May 2002 12:01 am
- Location: Seattle, Washington, USA
-
- Posts: 175
- Joined: 28 Apr 2003 12:01 am
- Location: Pleasant Hill, California, USA
I always read Mr. Aiello's posts on the Forum. Frequently more than once. It would appear that this true Rocket Scientist has fulfillment in many areas beyond the study of guitar pickups and is not just happy to, but enthusiastic to shares his research and acquired knowledge.
From our early memories of schooling we have examples of exceptional teachers that were particularly adept at imparting knowledge by making the esoteric interesting. Rick could certainly Quarterback in that league.
One must be aware that those on the 'cutting edge' always have petty detractors usually borne of secret admiration and uncontrollable jealousy.
If Rick is accused of 'just trying to sell pickups' then put me down as having been sold.
From our early memories of schooling we have examples of exceptional teachers that were particularly adept at imparting knowledge by making the esoteric interesting. Rick could certainly Quarterback in that league.
One must be aware that those on the 'cutting edge' always have petty detractors usually borne of secret admiration and uncontrollable jealousy.
If Rick is accused of 'just trying to sell pickups' then put me down as having been sold.
- Russ Young
- Posts: 1053
- Joined: 21 May 2002 12:01 am
- Location: Seattle, Washington, USA
I would prefer to think that anyone who questions Rick's motives is doing so out of not being familiar with him, and drawing the wrong conclusions from his enthusiasm about his magnets.
Otherwise, it looks like they had better stay the hell out of Arendal, Norway. (If you don't speak Norwegian, you probably don't know that "Steinar Gregertsen" means "the Norse god of retribution." In English it translates to "outside linebacker.")
Otherwise, it looks like they had better stay the hell out of Arendal, Norway. (If you don't speak Norwegian, you probably don't know that "Steinar Gregertsen" means "the Norse god of retribution." In English it translates to "outside linebacker.")
- Jeff Au Hoy
- Posts: 1716
- Joined: 11 Oct 2002 12:01 am
- Location: Honolulu, Hawai'i
I think everything that needs to be said has been said here, but I just want to throw in my support for Rick.
Whoever made the disparaging remark probably also believes the fluoridation of water is a Communist plot to rob them of their fertility.
Hoorah for Rick Aiello and all that he is doing for Rickenbacher enthusiasts. I eagerly read his forum posts. They are full of juicy goodness.
Whoever made the disparaging remark probably also believes the fluoridation of water is a Communist plot to rob them of their fertility.
Hoorah for Rick Aiello and all that he is doing for Rickenbacher enthusiasts. I eagerly read his forum posts. They are full of juicy goodness.
Raising those kids, becoming the worlds leading expert on Rickenbacher lap steel electronics and he still finds time to star in "Lobster Farm" ... http://www.imdb.com/name/nm0014519/
-
- Posts: 606
- Joined: 20 Aug 2003 12:01 am
- Location: Santa Cruz, California, USA * R.I.P.
- Rick Aiello
- Posts: 4701
- Joined: 11 Sep 2000 12:01 am
- Location: Berryville, VA USA
- Contact:
Although Danny is the "splittin' image" of my uncle, can't say for sure if he's "family".
But folks aways ask why my three children ... Ellie Jo, Emmie Jo and Dusty Joe ... all share a common middle name.
Their paternal grandparents joke and say its a "Petticoat Junction" thing ... they aren't to proud of our real Uncle Joe...
Maybe I'll get toJoliet this year ... "kill two birds with one stone" ...
Sorry if my postings led some of y'all to think I have been "spamming" ... last thing I'd ever want to do is cast a negative shadow on Jason and his work ...
- Terry Farmer
- Posts: 530
- Joined: 28 Jun 2002 12:01 am
- Location: Albuquerque, New Mexico, USA
- Russ Young
- Posts: 1053
- Joined: 21 May 2002 12:01 am
- Location: Seattle, Washington, USA
-
- Posts: 20
- Joined: 5 May 2004 12:01 am
- Location: Dallas, Texas, USA
As a new guy to steel guitars and the forum, Rick was invaluable in getting my Rick chrome plates and magnets chromed and magnetized. I sent him the worst looking magnets and plates, and they came back looking great. I have no doubt the difference in sound from the pickup will be as Rick said. He let me know exactly what he was dong to the parts and had them back to me one week after he received them. He had every right in my mind to sell me new magnets due to the shape mine were in and the subject never came up. The price Rick charged to do this work shows me he is not trying to get rich doing this. To me it shows great commitment to a small group of people with a common interest. It does not get any better than that.
Thanks Rick.