More POD stuff

Dean Brown · Post by **Dean Brown** » 5 Apr 2001 6:05 pm

I just bought a POD (2.0) and I'm just wondering a couple of things. Some folks mentioned a ver 2.2 chip. What's the difference between 2.0 and 2.1? The Line6 website only mentions the 2.0. The units being shipped to stores today are 2.0s.

Besides that.. Anyone come up with some real clean rich steel settings on this thing?

Dave Van Allen · Post by **Dave Van Allen** » 5 Apr 2001 7:17 pm

Dean- please check your e-mail

Dean Brown · Post by **Dean Brown** » 6 Apr 2001 9:38 pm

OK,
I got the manual out and just went through some basic settings (65 Twin Reverb) with a little delay and the sound is great! I haven't played it "live" yet, only through my stereo here at home. If it sounds as good through our band's system as it does here at home I'll never carry an amp again.

Jay Ganz · Post by **Jay Ganz** » 7 Apr 2001 6:57 am

Of course now Boss & Digitech have one of
these kinda contraptions along with
Yamaha & Johnson.

------------------
<img src=http://jsganz.tripod.com/AngryMan.gif>
 "Turn up the dang STEEL!!!"

Jack Stoner · Post by **Jack Stoner** » 7 Apr 2001 7:19 am

Almost every effects manufacturer now has a modeling device. I suspect the next incarnation of the Peavey *Fex units will also have modeling in them.

This is interesting on the POD. Most that have posted comments on the Forum about them haven't had much luck with a steel. They all report they work great with a guitar but they are tricky with a steel. Jeff Patterson is the only one I've seen post that is using a POD that seems to be getting what he wants out of it, but from his comments he is also endorsing them.

Fred Murphy · Post by **Fred Murphy** » 7 Apr 2001 8:00 am

Billy Phelps uses them and seems to like them. I thought he sounded pretty good also. Of course he plays very good also and that helps a lot.

Dave Van Allen · Post by **Dave Van Allen** » 7 Apr 2001 9:11 pm

Gary Morse is also an endorser.If you own a POD you are using for SteelGuitar I suggest you get in touch with him... I'm VERRRRY glad I did.

Gary is at e9c6@hotmail.com

That's all I can say.

Mike Perlowin · Post by **Mike Perlowin** » 8 Apr 2001 5:41 am

I spoke to one of the techs at Line 6, and suggested a pod for steel players, with Peavey, Webb, Evans, and GD Walker amps modeled, and the sounds that we need programmed in. The tech thought it was a very good idea, and would probably only require a new chip. He suggested that we all write to the company requesting such a chip or unit.

Mike Winfield · Post by **Mike Winfield** » 8 Apr 2001 10:06 am

I just got back from the Michigan steel show in Grand Rapids(great show!) and I took an all day seminar that included 2 hours with Gary Morse(Dwight Yokum's steel player). He used the POD unit with a Nashville 1000 and an old Sho-Bud. IMHO it was the best sounding rig of the entire weekend which included some of the finest players around(Hughey, Wallace, Wright and others). Gary said that he no longer uses a rack system. He uses the Pod for most of his recording and all his live work. He also mentioned that the 2.0 chip is a little noisy. His unit has the more advanced chip and another person that was taking the seminar said that they were coming out with a 2.3 chip. BTW, if you ever get a chance to take a seminar, JUST DO IT.Well worth the time and money.

Mike Winfield
Carter D-10
Nashville 1000
Boss effects[This message was edited by Mike Winfield on 08 April 2001 at 11:30 AM.]

Danny Hullihen · Post by **Danny Hullihen** » 9 Apr 2001 3:57 pm

Mike, I'm very happy to hear that you enjoyed the seminar. Gary's part of this, (and mine that we ran out of time for) was totally unrehersed, and we wasn't quite sure what we would cover, but it looks like it turned out great for everyone who attended. We'll be sure to do this again next year.

Gary is a personal friend of mine going on 30+ years now, and never ceases to amaze me!

I'm happy to hear that you enjoyed the show.

Dean Brown · Post by **Dean Brown** » 13 Apr 2001 12:35 pm

Well I've figured out some pretty beefy tones for this POD. You can crossmatch Amp type with Cabnet type and get some great combinations. There are no Peavey settings, but the Blackface Twins are killer. Line6's web site also offers some patches for downloading (non for steel) that emulate Vince, Albert and those guys. With some minor tweeking you can convert them to nice steel tones.

bob drawbaugh · Post by **bob drawbaugh** » 20 Apr 2001 6:20 pm

I got an Email back fron Line6. Tey told me to try the base pod for steelguitar. They said it had full range amp models that would work better with steel. Any one try it.