Vegas 400/ using 2 channels question

pwsmith · Post by **pwsmith** » 12 Apr 2001 11:11 am

Hello Friends,

I have a vegas 400 and I want to use 2 channels with a different effect box on each channel.

On channel 1 I want to use an ART tube pac (tube compression device) and on channel 2 I want to use my Zoom 505 guitar processor.

Is this possible to do? Any ideas on how I would connect something like this?

any input would be much appreciated

Smitty

------------------
Paul Smith
Chandler RH-2 LapSteel

Mike Brown · Post by **Mike Brown** » 16 Apr 2001 1:24 pm

Yes, there should be no problem with doing this as long as the device doesn't overdrive the input of the amp. The nominal input of the high gain input on channel one is 40mV and maximum 2.5volts. The nominal input on the NORMAL channel is 40mV. Check the output level of your effects devices for compatibility.

If you have further questions, please feel free to contact me here at the factory.

David Rich · Post by **David Rich** » 17 Apr 2001 7:22 am

An A/B box would work.