Help! My Amp is sick....
Moderator: Shoshanah Marohn
Help! My Amp is sick....
My Peavey Sessions 400 amp sounds like it is breaking up...sorta like the tremelo is on, but it's not.....like a tube is going, 'cept it aint got tubes...like it's battery is low. 'cept it aint got one. Know what I mean? Anyone out there with any tips?
I'm not sure about the session 400's but if it has phase shifter or the string effect make sure they are all the way off. I know every now and then one of them gets accidently turned on my session 500 and throws me for a small loop, hope this helps
------------------
sho-bud,session 500,american standard strat,shecter tele,peavy classic 50
------------------
sho-bud,session 500,american standard strat,shecter tele,peavy classic 50
- Dave Zirbel
- Posts: 4170
- Joined: 4 Aug 1998 11:00 pm
- Location: Sebastopol, CA USA
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
Check to make sure it's not something external to the amp. Many times a bad cord or bad volume pedal pot can cause the same symptom.
Run each knob through it's full rotation while the amp is on and see if you get any noise. If it's a dirty (or bad) pot you should get some static or noise as you move the pot. Also check the speaker jack and cable.
Run each knob through it's full rotation while the amp is on and see if you get any noise. If it's a dirty (or bad) pot you should get some static or noise as you move the pot. Also check the speaker jack and cable.
-
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
Be sure to take a shielded cable and connect the loop between the PRE AMP OUT and the POWER AMP IN. Then, connect a second cable shielded cable between the send and return jacks in EFFECTS PATCH 1, then EFFECTS PATCH 2. Also, connect another cable between the PRE EQ PATCH send and return jacks. If any of the above "loops" are not working properly, this will complete the loop. Also, check the LOW GAIN input.
Please feel free to contact me toll free at 1-877-732-8391 to discuss. I will be glad to help in the solution.
Mike Brown
Peavey Electronics Corporation
Please feel free to contact me toll free at 1-877-732-8391 to discuss. I will be glad to help in the solution.
Mike Brown
Peavey Electronics Corporation
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
-
- Posts: 6870
- Joined: 27 Nov 2000 1:01 am
- Location: Oklahoma City, OK USA, (deceased)
- Contact:
-
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
If you'd like to send your chassis to the Peavey factory, prepay it and pack it to UPS or FEDEX specifications so that it will be covered by insurance should it become damaged enroute to us. Include a note of symptoms and a daytime phone number of where you can be reached. Also, inform us of the method of payment, ie; COD or credit card. If you will let me know what the tracking number is, I'll try to meet it at our receiving dock.
If you wish to discuss this with me, feel free to contact me toll free at 1-877-732-8391. Maybe we can figure out a solution.
Thanks for choosing and using Peavey.
If you wish to discuss this with me, feel free to contact me toll free at 1-877-732-8391. Maybe we can figure out a solution.
Thanks for choosing and using Peavey.