The Steel Guitar Forum Store 

Post new topic CBers are killing me.
Reply to topic
Author Topic:  CBers are killing me.
Jim Florence

 

From:
wilburton, Ok. US * R.I.P.
Post  Posted 27 Aug 2000 6:38 am    
Reply with quote

When I use my old Fender, occasionaly the CB radios will burst in without warning and at incredible volume. I'm sure they all have linear amplifiers as FCC rules are not enforced here. Question is how can I guard against this? Even with my volume turned down the noise is incredibly loud.

------------------
View user's profile Send private message

Jack Stoner


From:
Kansas City, MO
Post  Posted 27 Aug 2000 10:20 am    
Reply with quote

Make sure all your cables and connectors are grounded good. Poor grade shielded cables or unshielded connectors will contributed to the problem (cables with plastic molded connectors instead of the better grade with the metal barrel) A lot of it comes in via the reverb. You may want to turn the reverb off and see if that helps.

This is just a start, but something you can do or check on easily.
View user's profile Send private message Send e-mail

Blake Hawkins


From:
Florida
Post  Posted 27 Aug 2000 10:44 am    
Reply with quote

Do what Jack says first.
If that does not help you might want to try placing small bypass caps across the instrument input and across the input and output of the reverb tank. You need caps small enough to not affect the tone of the instrument but large enough to short out the CB signals. Something in the range of 10 to 250 picofarad would be a starting point. You might have to experiment to find the right value.
If the signal is coming through the guitar pickup, then the bypass should on the guitar.
Otherwise...the input of the amp, close to the input transistor.
You need to determine exactly where the signal ingress is happening. Since it is very loud, it is probably getting into the input stage or the guitar.
You may be able to confirm that by turning down the volume, first with the pedal, then with the control on the amp.
If a simple cap does not work, then more shielding or a more elaborate tuned circuit would be the next step.
If you have a matchbox...try that.
Blake
View user's profile Send private message Send e-mail

Blake Hawkins


From:
Florida
Post  Posted 27 Aug 2000 10:50 am    
Reply with quote

OOps...reread your post.
If the signal is still there with the volume control on the amp turned down, then the ingress is after the control...probably in a driver stage. (Also see if it is still there with the reverb all the way off.)
I once worked on a television studio audio system which did that...only it was a nearby AM broadcast station...cured it with a tuned circuit connected from the base to the emitter of the transistor.
Blake
View user's profile Send private message Send e-mail

Rich Paton

 

From:
Santa Maria, CA.,
Post  Posted 27 Aug 2000 11:40 am    
Reply with quote

Rent a Caterpiller D-8 at your local equipment rental yard, and offer to mow the offender's radio room for free. Insist on this thougtful gesture...if you did it while he is away for the day, the effect of surprise would no doubt enhance his appreciation of the work.

[This message was edited by Rich Paton on 27 August 2000 at 12:42 PM.]

View user's profile Send private message

Steve Feldman


From:
Central MA USA
Post  Posted 27 Aug 2000 12:55 pm    
Reply with quote

If you all can get that figured out, maybe you can help me get rid of those damn diesels driving past my house. I know most folks have a problem with land mines.....
View user's profile Send private message Send e-mail

Hamilton Barnard

 

From:
Oro Valley, Arizona (deceased)
Post  Posted 29 Aug 2000 7:16 am    
Reply with quote

If you all can get that figured out, maybe you could help me get rid of those black helicopters that are always flying over my house. They seem to mostly come around whenever I'm test firing one of my machine guns.

Jim, since the FCC is doing nothing (oh wow, surprise...), it might be time to get out the ol' staple gun. If you know where that guys lives, shoot a staple (or small nail) right into his coax. It'll take him forever find it. And hopefully by the time that he has, he will have blown the final out of his linear.
View user's profile Send private message Send e-mail

Ric Epperle


From:
Sheridan, Wyoming USA . Like no other place on Earth... R.I.P.
Post  Posted 29 Aug 2000 9:55 am    
Reply with quote

The term for this phenomena is "Audio Rectification".. Very common, especially in older gear.(amps, etc.)
View user's profile Send private message Send e-mail

gary darr

 

From:
Somewhere out in Texas
Post  Posted 1 Sep 2000 1:36 pm    
Reply with quote

If you know where the antenna is, just a quick snap will do. just don't get caught! Just kiddin Ha Ha

------------------
sho bud pro 2 session 500
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP