How do I hook this thing up? I just got this
it's a used unit no book with it.I use a matchbox,volume pedal ect..Need info how to connect it and what all it's useages are ect.Thanks <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ronney Bailey on 01 March 2000 at 03:37 PM.]</p></FONT>
Ronnie, If the TUBE WORKS BlueTube II is what you're asking about, I will give you what information I have. It's a versatile PRE-AMP. You can go into the front of a combo amp like the Nashville 400 "instrument level",or go into the back power amp in "line level".To start with, forget about the 1st channel(red channel)for steel guitat. Both the 1st two switches should be in the "off" position.These switches are "channel" and "stack". Leaving these off or in the "down position, will give you the green or clean channel.All the knobs past the green light will be the controls you will use. Actually you will only need to worry about 4 knobs because the "stack master" knob is not in effect when the other "stack" switch is off. On the rear of the unit, You can go stereo out or mono out. Line level or instrument level.It all depends on what you will put next in the chain. The effects loop works well if you want to patch your processer into it. You can adjust the pots for the quitest operation. If You have any question, feel free to E-mail me.
Enjoy, Leon
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ronney Bailey on 01 March 2000 at 03:37 PM.]</p></FONT>