How many have Tabledit??????

MUSICO · Post by **MUSICO** » 13 Sep 2001 7:37 am

In it´s Registered version, Demo version or the free tefview program?????

I will start

Jeremy Williams : registered user

Doug Beaumier · Post by **Doug Beaumier** » 13 Sep 2001 7:40 am

registered user

------------------
www.dougbsteel.com

Post by **Joey Ace** » 13 Sep 2001 2:16 pm

registered

ebb · Post by **ebb** » 13 Sep 2001 3:43 pm

ditto

Chip Fossa · Post by **Chip Fossa** » 13 Sep 2001 4:17 pm

Registerd user; going on 3 years.

Bosse Engzell · Post by **Bosse Engzell** » 13 Sep 2001 5:50 pm

Registred. A nice softwear.

Bobby Lee · Post by **Bobby Lee** » 13 Sep 2001 5:56 pm

I rarely use tab, so I don't have a need for it.

Steve Cochran · Post by **Steve Cochran** » 13 Sep 2001 6:02 pm

Registered.

Joe Delaronde · Post by **Joe Delaronde** » 13 Sep 2001 8:01 pm

Registered!!!!!!
Joe

Rich Sullivan · Post by **Rich Sullivan** » 14 Sep 2001 2:59 am

Registered. Rich

SmallCap · Post by **SmallCap** » 14 Sep 2001 3:43 am

Registered

Roy Thomson · Post by **Roy Thomson** » 14 Sep 2001 10:27 am

Just got Registered version this week.

Paul Brainard · Post by **Paul Brainard** » 27 Sep 2001 8:18 pm

Just downloaded the demo - looks cool! Where can I find some .tef's to check out what people have done with it?

Doug Beaumier · Post by **Doug Beaumier** » 27 Sep 2001 9:00 pm

You'll find them HERE. You'll be able to hear arrangements by clicking on play. Click on the Print Preview to see a nice printable page.

There are also lots of guitar sites that feature Tabledit .tef files for regular guitar.

------------------
www.dougbsteel.com

[This message was edited by Doug Beaumier on 27 September 2001 at 10:01 PM.]

Andy Volk · Post by **Andy Volk** » 28 Sep 2001 3:09 am

Just registered. This is a great piece of software with almost too many options for people like me. My head hurts!

Seriously, I'm trying to tab out my lap steel arrangement of Bud's Bounce and the biggest problem I'm having is trying to figure out the timing and how to notate it.
Even though it uses behind the bar pulls maybe I should tab it as if it used pedal pulls to sound right?

Doug Beaumier · Post by **Doug Beaumier** » 28 Sep 2001 6:59 am

Andy, I would suggest doing lap steel tab in the standard 6 string guitar mode, i.e. not in the Pedal Steel Guitar mode. This will allow you to put "bends" in the tab. You can then add in text telling the reader to pull the string behind the bar. The tab numbers would be on the lines in that mode however, not in the spaces, which makes perfect sense for 6 string anyway. Click HERE and check my arrangement of I'm Confessin' to see string pulls on lap steel.

Try a simple "bend" and try a "bend and release". These are accessed in the SPECIAL EFFECTS box, under NOTES. Once you call up the SPECIAL EFFECTS box, you can re-access it by hitting "Enter". If you want to indicate a string pull in the tab, you will probably have to enter the fret number. Some of the special effects may not sound right in the MIDI, but they look right in the tab, or vice versa. I prefer have them look right in the tab.

To enter note values ( 1/2, 1/4, 1/8 , etc. ) the easiest way, click on DISPLAY and then PALETTES, and then NOTES. This puts the notes palette on the screen and allows you to work faster. It's also helpful to keep the TOOLS palette on the screen too. From TOOLS you can enter Text and set up repeats, etc. It's a good idea to click on the Print Preview every once in a while to see what your creation will look like. There are many options available in the Print Preview section, like spacings and adding stems into the tab, etc. Have fun.

------------------
www.dougbsteel.com

Andy Volk · Post by **Andy Volk** » 29 Sep 2001 3:35 am

Thanks for the tip, Doug. I'll try that.

Also - how are folks posting their .tefs here so that one can just click on a link to see the tab? Do you have to have a website with a refering url?[This message was edited by Andy Volk on 29 September 2001 at 04:36 AM.]

Post by **Joey Ace** » 29 Sep 2001 9:47 am

Andy,
It sounds like your asking if there's a an index of gifs. Not to my knowledge.

I maintain an index of tefs at http://www.pedalsteel.tv/tefs.htm

You need the Tabledit program to view and hear them. I don't see that as a problem since there is a FREE Tabledit viewer available for those that choose not to register. I have a link to the free viewer on that page.

-j0e-

Andy Volk · Post by **Andy Volk** » 29 Sep 2001 2:10 pm

Joey,

Let me clarify ... I can write an ASCII tab in Windows Notebook and paste it here in a Forum message. My question is, if I write a Tabledit tab and want to post on the Forum, do I need to put that .tef file on a server somewhere or is there a way to just attach it to my Forum message?

Post by **Joey Ace** » 29 Sep 2001 3:20 pm

Andy,
It's a convoluted process! Here's an example:

Here's How:

1. In Tabledit > "FILE" > "PRINT PREVIEW" > "EXPORT..." > "PASTE TO CLIPBOARD AS BITMAP"

2. Open PAINT or a similar program. PASTE the image into PAINT. Modify/crop it as needed. Then save it as a gif file.

3. Upload that gif file to a web server somewhere.

4. Insert that gif file into your forum message using the [IMG] tags. (You can click on the Edit Pencil over this message to see how that is done.)

All that work and your reader still can't HEAR it! That's why I think it best to just send a tef file to EBB or me. We'll make it available. The only catch is the end user needs some form of Tabledit. A small price to pay, especially when the viewer is FREE.

-j0e- [This message was edited by Joey Ace on 29 September 2001 at 04:36 PM.]

Andy Volk · Post by **Andy Volk** » 29 Sep 2001 4:45 pm

Joey,
Thanks for a straight answer! I get it now. If I can ever get the timing right I'll send 'em to you.

Post by **Joey Ace** » 30 Sep 2001 5:49 am

Timing is indeed the tough part when using this program.

It's not the programs fault. It's us.

When writing tab before, we were often not exactly correct with timing. We were close,and depended on our ears and memory to get it right. Now that we have a program that can play back what is written we are being forced to have the timing exactly correct.

I admit I'm also struggling with this. It's probably a good thing in the overall learning process, but is very frustrating in the short term.

-j0e-

Doug Beaumier · Post by **Doug Beaumier** » 30 Sep 2001 7:26 am

Keep in mind that you can print your arrangement in TAB ONLY. Print Preview / Print Setup / Printing / Print Tab Only

The TAB ONLY mode is a quick, handy way for users who don't want to deal with notation to do up some tab.

The notes will still appear when you are composing (.tef) but just ignore them, as you wouldn't be printing them anyway. The measure lines will still be there, and you'll need to enter your tab into the right measures.

------------------
www.dougbsteel.com

[This message was edited by Doug Beaumier on 30 September 2001 at 08:28 AM.][This message was edited by Doug Beaumier on 30 September 2001 at 08:30 AM.]