Req: "Tonight the Heartaches On Me" - Urgent

Written music for steel guitar

Moderator: Ricky Davis

Post Reply
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

I hope you have the knee lever that raises the first string to G#. It is used in that solo.

------------------
Carter D10 8p/10k
www.sinkler.com



User avatar
Doug Beaumier
Posts: 15642
Joined: 4 Aug 1998 11:00 pm
Location: Northampton, MA
Contact:

Post by Doug Beaumier »

You can pull string 1 up another 1/2 tone with your fingers behind the bar.

The turnaround after the first chorus in Tonight the Heartaches On Me makes use of the whole tone raise on string 1 (Key of F, fret 13). Raise string 1 with your knee lever and then pull it up another 1/2 tone with the fingers. This particular lick is heard a lot on country records these days. You need to pick string 3 and then string 1, bump your knee lever and at the same time pull string 1 up to the same note as string 3 (unison). It's a bit of a trick, but it's not impossible. I find myself using this move a lot now. That unison lick is also heard in the intro/turnaround on Alan Jackson's There Goes, and on a lot of other records.

On a short notice gig don't worry too much about copying licks exactly... just get the general feel.

dougb
www.dougbsteel.com
User avatar
Ricky Davis
Posts: 10964
Joined: 4 Aug 1998 11:00 pm
Location: Bertram, Texas USA
Contact:

Post by Ricky Davis »

Hey Joe this will get you by in a pinch.
<font face="monospace" size="3"><pre>1.________________15~~~~~~~__15~~~~~~~____________________
2.________13______________________________________________
3.________________________________________________________
4.___________13______15~15c_____15c~15__13~~~~___13~~~~_13
5._13~13a_______________________________13a~13___13~13a_13
6._____________________________________________13_________


3._____15b_________13b________13_______11_______8b~~_8b~~
4._______________________________________________________
5._____15a_________13a________13_______11_______8~8a_8~8a
6._13______15b_13b_____13b_13____13_11_____11_8__________


3.____________________________________
4._8____8______9L______9L________6~~6L
5._8____8__8a____9a~8a____9a~8a__6a~6~
6.___8b____8b_________________________
</pre></font>
Ricky


<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ricky Davis on 12 February 2000 at 10:02 PM.]</p></FONT>
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

That trick of pulling the first string with your bar hand is great. I have both the 1st string to G and G# (different levers) and still use this technique to pull the first string to G, probably more than the lever. It seems to be faster and have more "personality". Plus, it looks COOOOL.

I don't remember seeing Doug post before, but welcome aboard. This man has sooooo much to offer. I have seen some of his instructional material before and plan to purchase some here shortly.

Also, I would see if I could change your lever to pull to G#. Use the pull technique to get the G (don't work too good in the open position though Image ). I will probably remove mine and put something else in it's place.
------------------
Carter D10 8p/10k
www.sinkler.com

<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Richard Sinkler on 13 February 2000 at 01:09 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Richard Sinkler on 13 February 2000 at 01:11 PM.]</p></FONT>
Post Reply