OK, so I have a Mullen PRP SD-10 coming from a forum member.
I've noticed it has integrated tuners that are built into the headstock rather than bolt-on tuners like other steels I have had.
Mullen says I can send them in if the tuners go bad, and have them rebuilt, or replace the headstocks with new ones and 10 new bolt-on tuners.
Have any other PRP owners come across this issue? What was your solution if/when a tuner fails?
Thanks!!
Question about Mullen PRP tuners
Moderator: Shoshanah Marohn
-
- Posts: 249
- Joined: 3 Aug 2007 2:36 pm
- Location: Washington, USA
Question about Mullen PRP tuners
Justice ProLite, Williams S-10, Quilter TT-12.
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
Yeah, I had a D10 with these machines. Worked fine, nice and tight. Some people like the slick look of these. I didn't have any particlar problems with them, but I like the looks and operation of the mini Grovers personally.
Long as they work OK and there is support available, no reason to change, I guess.
-
- Posts: 249
- Joined: 3 Aug 2007 2:36 pm
- Location: Washington, USA
Agreed - I am a bit touchy about this after having a Grover fail on my Williams while tuning onstage. Locked up tight. I always keep a spare in my seat. Can't do that here. But been playing 50 years and never had an issue other than this one, so I guess it's just fresh.
Justice ProLite, Williams S-10, Quilter TT-12.
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
The ones in the photo were spares that came with a used guitar I bought. Just for fun, I took them apart just to see if they could be disassembled. The previous owner had boogered up one of the washers/nuts that hold the posts since they are round with no way to grip like a hex nut would have.
I think I found that the washer/nut didn't need to come off to get to the gears if one wanted to lube or repack them, but I defer to the good folks at Mullen. I was told that they do have a proper tool for that if necessary.
My thought is if any problems develop, I would just replace them with the current Grover keyheads vs. having the integrated ones rebuilt.
Congratulations on your purchase. Enjoy your new axe.
I think I found that the washer/nut didn't need to come off to get to the gears if one wanted to lube or repack them, but I defer to the good folks at Mullen. I was told that they do have a proper tool for that if necessary.
My thought is if any problems develop, I would just replace them with the current Grover keyheads vs. having the integrated ones rebuilt.
Congratulations on your purchase. Enjoy your new axe.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 498
- Joined: 16 Feb 2006 1:01 am
- Location: Decorah, Iowa, USA
- Contact:
My ‘89 D-10 PRP has these tuners and they are awesome. I’ve had the guitar since ‘90 and only issue I ever had was somehow I managed to snap a keyhead off on the C6th neck at a show. I took off that half and sent it to Mullen and they had it back to me within the week and fixed as good as new for a very reasonable fee if I remember. I believe at the time Mike told me the reason they made those was Del was having problems getting good reliable tuners at that time and decided to make his own. These were very expensive to manufacture and are a testament to Del’s and Mullen’s commitment to quality. I would not ever change them out if it were me.
-
- Posts: 249
- Joined: 3 Aug 2007 2:36 pm
- Location: Washington, USA
Now that I have the guitar, one more question re: the tuners
OK I received the guitar and the built-in tuners are fantastic - better than others by a long shot. Very precise.
Is there a method or need for lubrication of these tuners?
Boy this guitar is something else!!
Is there a method or need for lubrication of these tuners?
Boy this guitar is something else!!
Justice ProLite, Williams S-10, Quilter TT-12.
-
- Posts: 498
- Joined: 16 Feb 2006 1:01 am
- Location: Decorah, Iowa, USA
- Contact: